Eiki Lc-Xbm21 Multimedia Projector Owners Manual

41

An	interlaced	video	signal	can	be	displayed	in	progressive	mode.	Select	one	of	the	following	options.	Off	.........	Disabled.	L 1	 .........	For	an	active	picture.	L 2	.........	For	a	still	picture.	Film	.......	For	watching	a	film.	With	this	function,	the	projector	reproduces	pictures	faithful	to	the	original	film	quality.
Progressive
Noise reduction
Noise	interference	on	the	screen	can	be	reduced.	Select	one	of	the	following	options	to	get	smoother	images.	Off	 .........	Disabled.  L 1	............

4

This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Normal
Screen	Size	Adjustment
Screen Menu1
2
Provide	the	image	to	fit	the	screen	size	while	maintaining	the	aspect	ratio	of	the	input	signal.
Custom adj .
Note:	 •	 When	no 	signal 	is 	detected, 	Normal is	set	automatically 	and 	the 	Aspect 	adjustment	menu	disappears.	 •	 The 	adjustable 	range 	for 	Scale 	H/V	and	Position 	H/V	is 	limited 	depending 	on 	the	input	signal.
Full
Provide	the...

43

Keystone
This	function	 is	used	 to	adjust	 keystone	 distortion	 of	the		projected	image.	Use	the	Point	▲▼	buttons	to	choose	the	item	you	want	to	adjust.	Keystone				To	correct	keystone	distortion,	press	the	SELECT 	button.		Keystone	appears	on	the	screen.	Use	the	Point	▲▼	buttons	to	correct	keystone	distortion	(p.	3).	Store	or	Reset				To	store	or	reset	the	keystone	correction,	press	the	Point	►	button.    Store	.............	
Keep	the	keystone	correction	even	when	the	 AC	power	cord	is...

44

Setting
Setting
Setting MenuPress	the	MENU	button	to	display	the	On-Screen	Menu.	Press	the	Point	▲▼	buttons	 to	select	Setting	and	press	the	Point	►	or	the	SELECT 	button	to	access	the	submenu	items.
1
2Use	the	Point	▲▼	buttons	to	select	the	desired	item	and	then	press	the	Point	►	or	the	SELECT	button	to	access	the	selected	item.
This	projector	has	a	Setting	menu	that	allows	you	to	set	up	the	other	various	functions	described	below.
Language
Menu position
This	function	is	used	to	change	the	position...

45

Note:		•	 During	Input	search	is 	in 	progress, 	If 	the 	MENU	button 	or 	the 	ON/STAND-BY 	button 	is 	pressed,	Input 	search	will 	stop. 	If 	the 	COMPUTER 	1/ 	button 	 or VIDEO or COMPONENT or S-VIDEOor VIDEO or COMPONENT or S-VIDEO	VIDEO 	or 	COMPONENT 	or 	S-VIDEO	button 	is 	pressed, 	Input	search	will 	stop 	and 	go	back	to	the	button's	input	signal.			•	Input 	search,	Auto 	PC 	adj.	and 	Auto 	Keystone	can	not	be	set	Off	at	the	same	time.				•	Auto	 Keystone	corrects	 vertical...

46

Setting
This	function	decides	whether	to	display	On-Screen	Displays. On............................	Show	all	the	On-Screen	displays.	Use	this	function	when	you	want	to	project	images	after	the	lamp	becomes	bright	enough.	 The	factory	default	setting	is	in	this	option.	Countdown	Off.......	Show	the	input	image	instead	of	the	countdown	when	turning	on	the	projector.	Use	this	function	when	you	want	to	project	the	image	as	early	as	possible	even	when	the	lamp	is	not	bright	enough.	Off...

47

Setting
Capture
Capture
This	function	enables	you	to	capture	an	image	being	projected	to	use	it	for	a	starting-up	display	or	interval	of	presentations.
Select	Capture	and	press	the	SELECT	button.		A	confirmation	box	appears	and	select	Yes	to	capture	the	projected	image.
After	capturing	the	projected	image,	go	to	the	Logo	select	function	and	set	it	to	User.	Then	the	captured	image	will	be	displayed	the	next	time	you	turn	on	the	projector	or	when	you	press	the	NO	SHOW	button.	(see	page	6)
To...

48

Enter	a	Logo	PIN	code
Use	the	Point	▲▼	buttons	to	enter	a	number.	Press	the	Point	◄►	buttons	to	fix	the	number	and	move	the	red	frame	pointer	to	the	next	box.	The	number	changes	to	.	If	you	fixed	an	incorrect	number,	use	the	Point	◄►	buttons	to	move	the	pointer	to	the	number	you	want	to	correct,	and	then	enter	the	correct	number.
Repeat	this	step	to	complete	entering	a	four-digit	number.
After	entering	the	four-digit	number,	move	the	pointer	to	Set.	Press	the	SELECT	button	so	that	you	can	start	to...

49

Terminal
The	COMPUTER	IN	/MONITOR	OUT	terminal	on	the	back	of	the	projector	is	switchable	for	computer	input	or	monitor	output.	(See	page	9)		Select	Computer 2	or	Monitor Out	with	the	Point	▲▼	buttons.
	Computer 2	.	.		computer	input	Monitor Out. .	monitor	out
Terminal	function	is	not	available	when	selecting	Computer 2	to	the	input	source.		Change	the	input	source	to	the	others	(Computer	1,	and	so	on)	so	that	the	Terminal	function	will	be	available.	(pp.5,	36,	37)
Setting
Time	left	before...

50

Standby	mode
This	function	is	available	when	operating	the	projector	via	network.	Network	....	Supply	the	power	to	the	network	function	even	after	turning	off	the	projector	by	pressing	the	ON/STAND-BY 	button	on	the	remote	control.	You	can	turn	on/off	the	projector	via	network,	modify	network	environment,	and	receive	an	e-mail	about	projector	status	while	the	projector	is	powered	off.	Eco	............	Select	Eco	when	you	do	not	use	the	projector	via	network.	 The	projector’s	network	function	will...