Eiki Lc-Xbm21 Multimedia Projector Owners Manual

							
Multimedia  Projector 
MODEL LC-XBM21
  LC-XBM26
Network Supported 	 Wired	LANRefer	to	the	Owner's	Manuals	below	for	details	about	network	function.
	Network	Set-up	and	Operation
	PJ	Network	Manager
Owner's Manual 
						

							


Features and Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	(LCD)	technology.
♦	 Compact	Design
	 This	projector	is	designed	compact	in	size	and	weight.	It	is	easy	to	carry	and	installed	anywhere	you	wish	to	use.
♦	 Simple	Computer	System	Setting
	 The	projector	has	the	Multi-scan	system	to	conform	to	almost	all	computer	output	signals	quickly	(p.8).	Up	to	WUXGA 	resolution	can	be	accepted.
♦	 Useful	Functions	for	Presentations
	 -	 The	digital	zoom	function	allows	you	to	focus	on	the	crucial	information	during	a	presentation	(p.35).	
	 -	The	MIC	function	and	10W	audio	output	allows	you	to	make	a	presentation	without	any	external	audio	equipment	(p.4).
♦	 Lamp	Control
	 Brightness	of	the	projection	lamp	can	be	selected	(pp.5,	5).
♦	 Direct	OFF	Function
	 With	the	Direct	OFF	function,	you	can	disconnect	the	power	cord	from	the	wall	outlet	or	turn	off	the	breaker	even	during	projection	(p.0).
♦	 Logo	Function
	 The	Logo	function	allows	you	to	customize	the	screen	logo	(pp.46-48).	 You	can	capture	an	image	for	the	screen	logo	and	use	it	for	the	starting-up	display	or	between	presentations.
♦	 Multilanguage	Menu	Display
	 Operation	menu	is	available	in	0	languages:	English,	German,	French,	Italian,	Spanish,	Portuguese,	Dutch,	Swedish,	Finnish,	Polish,	Hungarian,	Romanian,	Russian,	 Turkish,	Kazakh,	Vietnamese,	Chinese,	Korean,	Japanese	and	Thai.(p.44)
♦	 Security	Function
	 The	Security	function	helps	you	to	ensure	security	of	the	projector.	With	the	Key	lock	
function,	you	can	lock	the	operation	on	the	top	control	or	remote	control	(p.53).	PIN	code	lock	function	prevents	unauthorized	use	of	the	projector	(pp.19,	53-54).
♦ Helpful	Maintenance	Functions
	 Lamp	and	filter	maintenance	functions	provide	for	better	and	proper	maintenance	of	the	projector.
♦	 LAN	Network	Function	
	 This	projector	is	loaded	with	the	Wired	LAN	network	function.	 You	can	operate	and	manage	the	projector	via	network.	For	details,	refer	to	the	owner’s	manual	of	“Network	Set-up	and	Operation.”
♦	 Auto	Setup 	Function 	
	This	function	enables	Input	search,	 Auto	Keystone	correction	and	Auto	PC	adjustment	by	simple	pressing	the	AUTO	SETUP	button	on	the	top	control	(p.45).
♦	 Colorboard 	Function 	
	 	At	the	time	of	simple	projection	on	the	colored	wall,	you	can	get	the	close	color	image	to	the	color	image	projected	on	a	white	screen	by	selecting	the	similar	color	to	the	wall	color	from	the	preset	four	colors.
♦	 Switchable	Interface	Terminal
 The	projector	provides	a	switchable	interface	terminal.	 You	can	use	the	terminal	as	computer	input	or	monitor	output	conveniently.	(p.49)
♦	Power Management
	 The	Power	management	function	reduces	power	consumption	and	maintains	the	lamp	life	(p.49).
♦	 Closed	Caption
	 Closed	Caption	is	a	function	that	displays	the	audio	portion	of	a	 TV	program	as	text	on	the	screen.	You	can	turn	on	the	feature	and	switch	the	channels.	(p.51) 
						

							
3

Table	of	Contents
TrademarksEach	name	of	corporations	or	products	in	this	book	is	either	a	registered	trademark	or	a	trademark	of	its	respective	corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Table	of	Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To	the	Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety	Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air	Circulation	6
Installing	the	Projector	in	Proper	Position	6
Moving	the	Projector	6
Compliance .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Part Names and Functions  .  .  .  .  .  .  .  .  .8
Front	8
Back	8
Bottom	8
Rear	Terminal		9
Top	Control	 10
Remote	Control	 11
Remote	Control	Battery	Installation	 1
Remote	Control	Operating	Range	 1
Remote	Control	Code	1
Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .13
Positioning	the	Projector	 13
Adjustable	Foot	13
Connecting	to	a	Computer	14
Connecting	to	Video	Equipment	 15
Connecting	to	Component	Video	and	RGB	
(Scart)	Equipment	16
Connecting	the	AC	Power	Cord	 17
Basic Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18
Turning	On	the	Projector	 18
Turning	Off	the	Projector	0
How	to	Operate	the	On-Screen	Menu	1
Menu	Bar	
Zoom	and	Focus	Adjustment	 3
Auto	Setup	Function	 3
Keystone	Correction	3
Sound	Adjustment	 4
Remote	Control	Operation	 5
Computer	Input	  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .27
Input	Source	Selection	(RGB:	Computer	1/
Computer	)	 7
Computer	System	Selection	8
Auto	PC	Adjustment	 9
Manual	PC	Adjustment	 30
Image	Mode	Selection		 3
Image	Adjustment	 33
Screen	Size	Adjustment	 34
Video	Input  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .36
Input	Source	Selection	(Video,	S-video)	 36
Input	Source	Selection	(Component,	RGB	
Scart	1-pin)	 37
Video	System	Selection	38
Image	Mode	Selection		39
Image	Adjustment	 40
Screen	Size	Adjustment	 4
Setting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .44
Setting	 44
Information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .57
Input	Source	Information	Display	 57
Maintenance and Cleaning  .  .  .  .  .  .  .  .58
WARNING	indicator	 58
Replacing	the	Filter	59
Resetting	the	Filter	Counter	59
Attaching	the	Lens	Cap	60
Cleaning	the	Projection	Lens	 60
Cleaning	the	Projector	Cabinet	 60
Lamp	Replacement	61
Appendix	  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .63
Troubleshooting	 63
Menu	Tree	 67
Indicators	and	Projector	Condition	 69
Compatible	Computer	Specifications	 70
Technical	Specifications	 71
Optional	Parts	7
PJ	Link	Notice	73
Attaching	the	Filter	Cover	to	the	Projector	73
Configurations	of	Terminals	 74
PIN	Code	Number	Memo	 75
Dimensions	76 
						

							
4

To	the	Owner
CAUTION:				TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	BACK).	NO	USER-SERVICEABLE	PARTS	INSIDE	EXCEPT	LAMP	REPLACEMENT.	REFER	SERVICING	TO	QUALIFIED	SERVICE	PERSONNEL.
THIS	SYMBOL 	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	ARE	IMPORTANT	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	THE	OWNER'S	MANUAL	WITH	THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN
Before	installing	and	operating	this	projector,	read	this	manual	thoroughly.	This	projector	provides	many	convenient	features	and	functions.	Operating	the	projector	properly	enables	you	to	manage	those	features	and	maintains	it	in	good	condition	for	many	years	to	come.	Improper	operation	may	result	in	not	only	shortening	the	product-life,	but	also	malfunctions,	fire	hazard,	or	other	accidents.	If	your	projector	seems	to	operate	improperly,	read	this	manual	again,	check	operations	and	cable	connections	and	try	the	solutions	in	the	“Troubleshooting”	section	on	pages	63-65	of	this	manual.	If	the	problem	still	persists,	contact	the	dealer	where	you	purchased	the	projector	or	the	service	center.
     Safety	Precaution
CAUTION
DO	NOT	SET	THE	PROjECTOR	IN	GREASY ,	WET,	OR	SMOKY	CONDITIONS	SUCH	AS	IN	A	KITCHEN	TO	PREVENT	 A	BREAKDOWN	OR	A	DISASTER.	IF	THE	PROjECTOR	COMES	IN	CONTACT	WITH	OIL	OR	CHEMICALS,	IT	MAY	BECOME	DETERIORATED.
READ	 AND	KEEP 	THIS	OWNER'S	MANUAL 	FOR	LATER	USE.
WARNING:		
  	THIS	APPARATUS	MUST	BE	EARTHED.
  		TO	REDUCE	THE	RISK	OF	FIRE	OR							ELECTRIC	SHOCK,	DO	NOT	EXPOSE	 							THIS	 APPLIANCE	TO	RAIN	OR			MOISTURE.
–		This	projector	produces	intense	light	from	the	projection	lens.	Do	not	stare	directly	into	the	lens,	otherwise	eye	damage	could	result.	Be	especially	careful	that	children	do	not	stare	directly	into	the	beam.–	 	Install	the	projector	in	a	proper	position.	Improper	positioning	may	reduce	the	lamp	life	and	result	in	severe	accident	or	fire	hazard.–		Allowing	the	proper	amount	of	space	on	the	top,	sides,	and	rear	of	the	projector	cabinet	is	critical	for	proper	air	circulation	and	cooling	of	the	unit.	 The	dimension	shown	here	indicate	the	minimum	space	required.	If	the	projector	is	to	be	built	into	a	compartment	or	similarly	enclosed,	these	minimum	distances	must	be	maintained.–		Do	not	cover	the	ventilation	slot	on	the	projector.	Heat	build-up	can	reduce	the	service	life	of	your	projector,	and	can	also	be	dangerous.
–		If	the	projector	is	unused	for	an	extended	time,	unplug	the	projector	from	the	power	outlet.–		Do	not	project	the	same	image	for	a	long	time.	 The	afterimage	may	remain	on	the	LCD	panels	by	the	characteristic	of	panel.
SIDE	and	TOPREAR
0.7’(20cm)
1.5’(50cm)3’(1m)3’(1m)
20cm
50cm1m1m
FOR	EU	USERSThe	symbol	mark	and	recycling	systems	described	below	apply	to	EU	countries	and	do	not	apply	to	countries	in	other	areas	of	the	world.Your	product	is	designed	and	manufactured	with	high	quality	materials	and	components	which	can	be	recycled	and/or	reused.The	symbol	mark	means	that	electrical	and	electronic	equipment,	batteries	and	accumulators,	at	their	end-of-life,	should	be	disposed	of	separately	from	your	household	waste.Note:If	a	chemical	symbol	is	printed	beneath	the	symbol	mark,	this	chemical	symbol	means	that	the	battery	or	accumulator	contains	a	heavy	metal	at	a	certain	concentration.	 This	will	be	indicated	as	follows:	Hg: mercury, Cd: cadmium, Pb: leadIn	the	European	Union	there	are	separate	collection	systems	for	used	electrical	and	electronic	equipment,	batteries	and	accumulators.Please,	dispose	of	them	correctly	at	your	local	community	waste	collection/recycling	centre.Please,	help	us	to	conserve	the	environmentwe	live	in!
CAUTION
NOT	FOR	USE	IN	A	COMPUTER	ROOM	AS	DEFINED	IN	THE	STANDARD	FOR	THE	PROTECTION	OF	ELECTRONIC	COMPUTER/DATA	PROCESSING	EQUIPMENT,	ANSI/NFPA 	75. 
						

							
5

To	the	OwnerSafety	Instructions
All	the	safety	and	operating	instructions	should	be	read	before	the	product	is	operated.
Read	all	of	the	instructions	given	here	and	retain	them	for	later	use.	Unplug	this	projector	from	AC	power	supply	before	cleaning.	Do	not	use	liquid	or	aerosol	cleaners.	Use	a	damp	cloth	for	cleaning.
Follow	all	warnings	and	instructions	marked	on	the	projector.
For	added	protection	to	the	projector	during	a	lightning	storm,	or	when	it	is	left	unattended	and	unused	for	long	periods	of	time,	unplug	it	from	the	wall	outlet.	 This	will	prevent	damage	due	to	lightning	and	power	line	surges.
Do	not	expose	this	unit	to	rain	or	use	near	water...	for	example,	in	a	wet	basement,	near	a	swimming	pool,	etc...
Do	not	use	attachments	not	recommended	by	the	manufacturer	as	they	may	cause	hazards.
Do	not	place	this	projector	on	an	unstable	cart,	stand,	or	table.	The	projector	may	fall,	causing	serious	injury	to	a	child	or	adult,	and	serious	damage	to	the	projector.	Use	only	with	a	cart	or	stand	recommended	by	the	manufacturer,	or	sold	with	the	projector.	Wall	or	shelf	mounting	should	follow	the	manufacturer’s	instructions,	and	should	use	a	mounting	kit	approved	by	the	manufacturers.
An	appliance	and	cart	combination	should	be	moved	with	care.	Quick	stops,	excessive	force,	and	uneven	surfaces	may	cause	the	appliance	and	cart	combination	to	overturn.
Slots	and	openings	in	the	back	and	bottom	of	the	cabinet	are	provided	for	ventilation,	to	ensure	reliable	operation	of	the	equipment	and	to	protect	it	from	overheating.
The	openings	should	never	be	covered	with	cloth	or	other	materials,	and	the	bottom	opening	should	not	be	blocked	by	placing	the	projector	on	a	bed,	sofa,	rug,	or	other	similar	surface.	 This	projector	should	never	be	placed	near	or	over	a	radiator	or	heat	register.
This	projector	should	not	be	placed	in	a	built-in	installation	such	as	a	book	case	unless	proper	ventilation	is	provided.Never	push	objects	of	any	kind	into	this	projector	through	cabinet	slots	as	they	may	touch	dangerous	voltage	points	or	short	out	parts	that	could	result	in	a	fire	or	electric	shock.	Never	spill	liquid	of	any	kind	on	the	projector.Do	not	install	the	projector	near	the	ventilation	duct	of	air-conditioning	equipment.
This	projector	should	be	operated	only	from	the	type	of	power	source	indicated	on	the	marking	label.	If	you	are	not	sure	of	the	type	of	power	supplied,	consult	your	authorized	dealer	or	local	power	company.
Do	not	overload	wall	outlets	and	extension	cords	as	this	can	result	in	fire	or	electric	shock.	Do	not	allow	anything	to	rest	on	the	power	cord.	Do	not	locate	this	projector	where	the	cord	may	be	damaged	by	persons	walking	on	it.
Do	not	attempt	to	service	this	projector	yourself	as	opening	or	removing	Covers	may	expose	you	to	dangerous	voltage	or	other	hazards.	Refer	all	servicing	to	qualified	service	personnel.
Unplug	this	projector	from	wall	outlet	and	refer	servicing	to	qualified	service	personnel	under	the	following	conditions:a.	When	the	power	cord	or	plug	is	damaged	or	frayed.b.	If	liquid	has	been	spilled	into	the	projector.c.		If	the	projector	has	been	exposed	to	rain	or	water.d.	 If	the	projector	does	not	operate	normally	by	following	the	operating	instructions.	 Adjust	only	those	controls	that	are	covered	by	the	operating	instructions	as	improper	adjustment	of	other	controls	may	result	in	damage	and	will	often	require	extensive	work	by	a	qualified	technician	to	restore	the	projector	to	normal	operation.e.	 If	the	projector	has	been	dropped	or	the	cabinet	has	been	damaged.f.		When	the	projector	exhibits	a	distinct	change				in	performance-this	indicates	a	need	for	service.
When	replacement	parts	are	required,	be	sure	the	service	technician	has	used	replacement	parts	specified	by	the	manufacturer	that	have	the	same	characteristics	as	the	original	part.	Unauthorized	substitutions	may	result	in	fire,	electric	shock,	or	injury	to	persons.
Upon	completion	of	any	service	or	repairs	to	this	projector,	ask	the	service	technician	to	perform	routine	safety	checks	to	determine	that	the	projector	is	in	safe	operating	condition.
NOTE	FOR	CUSTOMERS	IN	THE	US	Hg	LAMP(S)	INSIDE	THIS	PRODUCT	CONTAIN	MERCURY 	AND	MUST 	BE	RECYCLED	OR	DISPOSED	OF	 ACCORDING	TO	LOCAL,	STATE	OR	FEDERAL 	LAWS. 
						

							
6

Safety	Instructions
Openings	in	the	cabinet	are	provided	for	ventilation.	To	ensure	reliable	operation	of	the	product	and	to	protect	it	from	overheating,	these	openings	must	not	be	blocked	or	covered.	
	CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	When	using	or	installing	the	projector,	the	following	precautions	should	be	taken.	
–			Do	not	put	any	flammable	object	or	spray	can	near	the	projector,	hot	air	is	exhausted	from	the	ventilation	holes.–			Keep	the	exhaust	vent	at	least	3’ 	(1	m)	away	from	any	objects.–		 Do	not	touch	a	peripheral	part	of	the	exhaust	vent,	especially	screws	and	metallic	parts.	 These	areas	will	become	hot	while	the	projector	is	being	used.–		 Do	not	put	anything	on	the	cabinet.	Objects	put	on	the	cabinet	will	not	only	get	damaged	but	also	may	cause	fire	hazard	by	heat.–		Make	sure	that	there	is	no	object	under	the	projector	to	prevent	from	covering	the	bottom	openings.
Cooling	fans	are	provided	to	cool	down	the	projector.	The	fans’	running	speed	is	changed	according	to	the	temperature	inside	the	projector.
Moving	the	Projector
When	moving	the	projector,	retract	the	adjustable	foot	to	prevent	damage	to	the	cabinet	and	use	a	suitable	carrying	case.When	this	projector	is	not	in	use	for	an	extendedperiod,	put	it	into	a	suitable	case	to	protect	theprojector.
Air	Circulation
Exhaust	Vent(Hot	air	exhaust)
Do	not	tilt	the	projector	more	than	30	degrees	from	above	and	below.
Do	not	point	the	projector	up	to	project	an	image.
Do	not	point	the	projector	down	to	project	an	image.	
Do	not	put	the	projector	on	either	side	to	project	an	image.	
Install	the	projector	properly.	Improper	installation	may	reduce	the	lamp	life	and	cause	a	fire	hazard.
Installing	the	Projector	in	Proper	
Position
Do	not	tilt	the	projector	more	than	0	degrees	from	side	to	side.
20°
20°
30°
30°
CAUTION	IN	CARRYING	OR	TRANSPORTING	THE	PROjECTOR
–		 Do	not	drop	or	bump	the	projector,	otherwise	damages	or	malfunctions	may	result.–			When	carrying	the	projector,	use	a	suitable	carrying	case.–		Do	not	transport	the	projector	by	courier	or	any	other	transport	service	in	an	unsuitable	transport	case.	 This	may	cause	damage	to	the	projector.	For	information	about	transporting	the	projector	by	courier	or	any	other	transport	service,	consult	your	dealer.–		Do	not	put	the	projector	in	a	case	before	the	projector	is	cooled	enough.
Air	Intake	Vent
Air	Intake	Vent(Filter) 
						

							
7

Compliance
Federal Communications Commission Notice
Note:	This	equipment	 has	been	 tested	 and	found	 to	comply	 with	the	limits	 for	a	Class	 B	digital	 device,	pursuant	 to	Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	interference	 in	a	residential	 installation.	 This	equipment	 generates,	 uses,	and	can	radiate	 radio	frequency	 energy,	and	if	not	 installed	 and	used	 in	accordance	 with	the	instructions,	 may	cause	 harmful	interference	 to	radio	 communications.	 However,	there	is	no	 guarantee	 that	interference	 will	not	occur	 in	a	particular	 installation.	 If	this	 equipment	 does	cause	 harmful	 interference	 to	radio	 or	television	 reception,	which	can	be	determined	 by	turning	 the	equipment	 off	and	 on,	the	user	 is	encouraged	 to	try	 to	correct	 the	interference	by	one	or	more	of	the	following	measures:–	Reorient	or	relocate	the	receiving		antenna.–	Increase	the	separation	between	the	equipment	and	receiver.–	Connect	the	equipment	into	an	outlet	on	a	circuit	different	from	that	to	which	the	receiver	is	connected.–	Consult	the	dealer	or	an	experienced	radio/TV	technician	for	help.Use	of	shielded	cable	is	required	to	comply	with	class	B	limits	in	Subpart	B	of	Part	15	of	FCC	Rules.Do	not	 make	 any	changes	 or	modifications	 to	the	 equipment	 unless	otherwise	 specified	in	the	 instructions.	 If	such	changes	or	modifications	should	be	made,	you	could	be	required	to	stop	operation	of	the	equipment.Model	Number						:	LC-XBM1;	LC-XBM6Trade	Name										:	EIKIResponsible	party	:	EIKI	International,Inc.Address																:	3051	Esperanza	Santa	Margaria	CA 	9688-13Telephone	No.						:	800-4-3454	(949-457-000)
The	AC	Power	Cord	supplied	with	this	projector	meets	the	requirement	for	use	in	the	country	you	purchased	it.		
AC	Power	Cord	for	the	United	States	and	Canada:
AC	Power	Cord	used	in	the	United	States	and	Canada	is	listed	by	the	Underwriters	Laboratories	(UL)	and	certified	by	the	Canadian	Standard	 Association	(CSA).AC	Power	Cord	has	a	grounding-type	AC	line	plug.	This	is	a	safety	feature	to	be	sure	that	the	plug	will	fit	into	the	power	outlet.	Do	not	try	to	defeat	this	safety	feature.	Should	you	be	unable	to	insert	the	plug	into	the	outlet,	contact	your	electrician.
AC	Power	Cord	Requirement
AC	Power	Cord	for	the	United	Kingdom:
This	cord	is	already	fitted	with	a	moulded	plug	incorporating	a	fuse,	the	value	of	which	is	indicated	on	the	pin	face	of	the	plug.		Should	the	fuse	need	to	be	replaced,	an	 ASTA	approved	BS	136	fuse	must	be	used	of	the	same	rating,	marked	thus	ASA.	If	the	fuse	cover	is	detachable,	never	use	the	plug	with	the	cover	omitted.	If	a	replacement	fuse	cover	is	required,	ensure	it	is	of	the	same	colour	as	that	visible	on	the	pin	face	of	the	plug	(i.e.	red	or	orange).	Fuse	covers	are	available	from	the	Parts	Department	indicated	in	your	User	Instructions.If	the	plug	supplied	is	not	suitable	for	your	socket	outlet,	it	should	be	cut	off	and	destroyed.The	end	of	the	flexible	cord	should	be	suitably	prepared	and	the	correct	plug	fitted.	WARNING	:	 A	PLUG	WITH	BARED	FLEXIBLE	CORD	IS	HAZARDOUS	IF	ENGAGED	IN	 A	LIVE	SOCKET	OUTLET.The	Wires	in	this	mains	lead	are	coloured	in	accordance	with	the	following	code:	 Green-and-yellow	 . . . . .Earth	 Blue	.	.	.	.	.	.	.	.	.	.	.	.	.	.	.	.Neutral	 Brown. . . . . . . . . . . . . . .LiveAs	the	colours	of	the	wires	in	the	mains	lead	of	this	apparatus	may	not	correspond	with	the	coloured	markings	identifying	the	terminals	in	your	plug	proceed	as	follows:The	wire	which	is	coloured	green-and-yellow	must	be	connected	to	the	terminal	in	the	plug	which	is	marked	by	the	letter	E	or	by	the	safety	earth	symbol		or	coloured	green	or	green-and-yellow.The	wire	which	is	coloured	blue	must	be	connected	to	the	terminal	which	is	marked	with	the	letter	N	or	coloured	black.The	wire	which	is	coloured	brown	must	be	connected	to	the	terminal	which	is	marked	with	the	letter	L 	or	coloured	red.WARNING:	THIS	APPARATUS	MUST	BE	EARTHED.
THE	SOCKET-OUTLET	SHOULD	BE	INSTALLED	NEAR	THE	EQUIPMENT	 AND	EASILY	ACCESSIBLE. 
						

							
8

Part Names and Functions
Back
①	Top	controls	and	Indicators②	Zoom	Ring③	Focus	Ring④	Speaker⑤	 Infrared	Remote	Receiver⑥	Projection Lens⑦	Lens Cap	 (See	page	60	for	attaching.)
⑧	Air	Intake	Vent
⑨	Lamp Cover⑩	Terminals	and	Connectors⑪	LAN	Connection	Terminal⑫ Power Cord Connector⑬ Exhaust	Vents
	CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	Do	not	put	heat-sensitive	objects	near	this	side.
⑭	Filter ⑮	Adjustable	Foot
Note:
⑪	LAN	Connection	Terminal	is	for	the	Network	function.	Refer	to	the	owner’s	manual	of	“Network	Set-up	and	Operation”	.
	Kensington	Security	Slot
This	slot	is	for	a	Kensington	lock	used	to	deter	theft	of	the	projector.*Kensington is a registered trademark of ACCOKensington	is	a	registered	trademark	of	 ACCO		Brands	Corporation.
	CAUTION
Do	not	turn	on	a	projector	with	lens	cap	attached.	High	temperature	from	light	beam	may	damage	lens	cap	and	result	in	fire	hazard.
⑪⑨

Bottom
⑮
⑬⑬⑫
⑭
⑩
⑤⑦⑧
③②
Front
⑥
①
④ 
						

							
9

‰
(MIC)-

Part Names and Functions
Rear	Terminal	
②③①
⑥
⑤
⑧
④
④			VIDEO	IN	 Connect	the	composite	video	output	signal	to	this	jack	(p.15).
② 	COMPUTER	IN	1	/S-VIDEO	IN	/	COMPONENT	IN	 Connect	output	signal	from	a	computer,	component	video	output,	RGB	scart	1-pin	video	output	or	S-video	output	to	this	terminal.	(pp.14-16).
⑥ 	AUDIO	OUT	(VARIABLE)	 Connect	an	external	audio	amplifier	to	this	jack	(pp.14-16).	 This	terminal	outputs	sound	from	 AUDIO	IN	terminal.
⑤			LAN	Connection	Terminal	 Connect	the	LAN	cable	(refer	to	the	owner’s	manual	of	“Network	Set-up	and	Operation”).
①			CONTROL 	PORT	 When	controlling	the	projector	with	RS-3C,	connect	the	control	equipment	to	this	connector	with	the	serial	control	cable.
③ 	COMPUTER	IN	2	/	MONITOR	OUT	 –	Connect	analog	RGB	output	signal	from	a					computer	to	this	terminal	(p.14).	 –	 This	terminal	can	be	used	to	output	the	incoming	analog	RGB	and	Component		signal	from	COMPUTER	IN	1	/S-VIDEO	IN	/COMPONENT 	IN	terminal	to	the	other	monitor	(pp.14,16).
⑦
⑦			AUDIO	IN	(PC/MIC)	 Connect	the	audio	output	signal	from	computer	or	video	equipment	connected	to	② and	③ to	this	jack.	Or	connect	the	MIC	to	this	jack.	(pp.14-16).
⑧ 	AUDIO	IN	(L/R)L/R)
	 	 Connect	 the	audio	 output	 signal	from	video	equipment	 connected	to	④ to	this	 jack.	 For	a	mono 	audio 	signal 	(a 	single 	audio 	jack),	connect	it	to	L(MONO)	jack.	(p.15).
						Note:	When	using	 AUDIO	IN(PC/MIC)	terminal	as	MIC	input,	these	terminals	can	be	used	for	PC	audio	input. 
						

							
10

Part Names and Functions
Top	Control
⑦ 	LAMP	REPLACE	indicator	 Lights	yellow	when	the	projection	lamp	reaches	its	end	of	life	(pp.61,	69).
⑧ 	WARNING	indicator	 –	Lights	red	when	the	projector	detects	an	abnormal	condition.		 –	Blinks	red	when	the	internal	temperature	of	the	projector	exceeds	the	operating	range	(pp.58,	69).④		ON/STAND–BY 	buttonTurn	the	projector	on	or	off	(pp.18-0).
⑤ 	POWER	indicator	 –	Lights	red	when	the	projector	is	in	stand-by	mode.	 –	Lights	green	during	operations.	 –	Blinks	green	in	the	Power	management	mode	(p.49).
⑥ 	MENU	button	 Open	or	close	the	On-Screen	Menu	(p.1).
②  POINT	▲▼◄►	(VOLUME	+/–)	buttons	 –	Select	an	item	or	adjust	the	value	in	the	On-Screen	Menu	(p.1).	 –	Pan	the	image	in	the	Digital	zoom	+/-	mode	(p.35).	 –	Adjust	the	volume	level	(Point	◄►buttons)	(p.4).
③ 	AUTO	SETUP	button	 Execute	the	setting	of	 Auto	setup	(includes	Input	search,	Auto	PC	adj.	and	 Auto	Keystone	functions)	in	the	setting	menu.	(pp.3,	45).
①		SELECT	button	 –	Execute	the	selected	item	(p.1).	 –	Expand	or	compress	the	image	in	the	Digital	zoom	mode	(p.35).
①
②
③
④
⑤
⑧
⑥
⑦