Eiki Lc-Xbm21 Multimedia Projector Owners Manual

1

How	to	Operate	the	On-Screen	Menu
The	projector	 can	be	adjusted	 or	set	 via	the	 On-Screen	Menu. 	The 	menus 	have 	a 	hierarchical 	structure, 	with	a 	main 	menu 	that 	is 	divided 	into 	submenus, 	which	are 	further 	divided 	into 	other 	submenus. 	For 	each	adjustment 	and 	setting 	procedure, 	refer 	to 	respective	sections	in	this	manual.
Use	 the	Point	▲▼	buttons	 to	highlight	 or	select	 a	main	menu	item.	 Press	the	Point	►	or	the	SELECT 	button	to	access	 the	submenu	 items.	(The...



Basic Operation
Menu Bar
For	detailed	functions	of	each	menu,	see	“Menu	Tree”	on	pages	67-68.
Main	MenuSub-Menu
③	Image	select	 Used	to	select	an	image	mode	from	among	Dynamic,	Standard,	Real,	Cinema,	Blackboard(Green), 	Colorboard	and	Image	1-4.	(pp.3,	39)
④	Image	adjust	 For	computer	source,	used	to	adjust	computer	image	[Contrast,	Brightness,	Iris,	Color temp .,	White	balance	(R/G/B),	Sharpness,	Gamma, Reset	and Store]	(p.33).					For	Video	source,	used	to	adjust	picture	image...

3

Basic Operation
Rotate	the	Zoom	Ring	to	zoom	in	and	out.		Rotate	the	Focus	Ring	to	adjust	the	focus	of	the	image.		
Zoom	and	Focus	Adjustment
If	a	projected	picture	still	has	keystone	distortion	after	pressing	the	AUTO	SETUP 	button	on	the	top	control	or	the	AUTO	SET 	button	on	the	remote	control,	correct	the	image	manually	as	follows:
Press	the	KEYSTONE	button	on	the	remote	control.	 The	Keystone	dialog	box	appears.	Use	the	Point	▲▼	buttons	to	correct	keystone	distortion.	The	keystone...

4

Basic Operation
Sound	Adjustment
1
2
Press	the	MENU	button	to	display	the	On-Screen	Menu.	Use	the	Point	▲▼	buttons	to	select	Sound.	Press	the	Point	►	or	the	SELECT 	button	to	access	the	submenu	items.	
Press	the	VOLUME+/–	buttons	on	the	top	control	or	on	the	remote	control	to	adjust	the	volume.	 The	volume	dialog	box	appears	on	the	screen	for	a	few	seconds.
Press	the	MUTE	button	on	the	remote	control	to	select	On	to	temporarily	turn	off	the	sound.	To	turn	the	sound	back	on,	press	the	MUTE	button...

5

Basic Operation
Remote	Control	Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
Press	the	COMPUTER	1/,	VIDEO,	S-VIDEO	and	COMPONENT	buttons	on	the	remote	control	to	select	the	input	source.	See	pages	7,	36-37	for	details.
COMPUTER	1/2,	VIDEO,	S-VIDEO	and	COMPONENT		buttons
FREEZE	button
Display	the	input	source	information:	Input,...

6

Basic Operation
NO	SHOW	button
Press	the	P-TIMER	button	on	the	remote	control	to	operate	the	Count	up/Count	down	function.	Refer	to	p.50	for	detail	of	Setting	for	the	P-timer	function.To	stop	the	count	time,	press	the	P-TIMER	button.To	cancel	the	P-timer	function,	press	and	hold	the	P-TIMER	button.
P-TIMER	button
Press	the	IMAGE	button	on	the	remote	control	to	select	a	desired	image	mode	of	the	screen.	See	pages	3,	39	for	details.
IMAGE	buttonNo	show	disappears	after	4	seconds.
Note:See...

7

Choose	either	Computer	1(RGB)	or	Computer	2(RGB)	by	pressing	the	COMPUTER	1	or	COMPUTER		button	on	the	remote	control.Before	using	these	buttons,	correct	input	source	should	be	selected	through	Menu	operation	as	described	below.
1
Input	Menu
2
3
Note:	 	 When	the 	Input 	Search 	function 	is 	set 	to	On 1	or	On 2	in	 the	 Auto	 setup	 function,	 the	input	signal 	will 	be 	searched 	automatically	(p.45).
Computer 1
Remote	Control
Press	the	MENU	button	to	display	the	On-Screen	Menu.	Use	the...

8

Computer	InputComputer	Input
PC	System	Menu
PC	System	Menu
Computer	System	Selection
This	projector	automatically	tunes	to	various	types	of	computers	with	its	Multi-scan	system	and	Auto	PC	Adjustment.	If	a	computer	is	selected	as	a	signal	source,	this	projector	automatically	detects	the	signal	format	and	tunes	to	project	a	proper	image	without	any	additional	settings.	(Signal	formats	provided	in	this	projector	are	shown	on	page	70.)
One	of	the	following	messages	may	appear	when:
When	the...

9

Computer	Input
Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	Fine	sync,	Total	dots,	Horizontal	and	Vertical	positions	to	conform	to	your	computer.
PC adjust Menu
Auto	PC	 Adjustment
To	store	adjustment	parametersThe	adjusted	parameters	from	the	 Auto	PC	Adjustment	can	be	stored	in	the	projector.	Once	the	parameters	are	stored,	the	setting	can	be	done	just	by	selecting	a	Mode	(1–10)	in	the	PC	System	Menu	(see	page	8).	See	also	“Store”	on	page	31.
Note:	 •	Fine	sync,	Total...

30

Computer	InputComputer	Input
PC adjust Menu
Manual	PC	Adjustment
Some	computers	employ	special	signal	formats	which	may	not	be	tuned	by	Multi-scan	system	of	this	projector.		Manual	PC	Adjustment	enables	you	to	precisely	adjust	several	parameters	to	match	those	signal	formats.	 The	projector	has	five	independent	memory	areas	to	store	those	parameters	manually	adjusted.	It	allows	you	to	recall	the	setting	for	a	specific	computer.	
1
2
Use	the	Point	◄►	buttons	to	adjust	the	value,	eliminating	a	flicker...