Eiki Lc-Xb43n Multimedia Projector Owners Manual

41

Choose Video or S-video by pressing the INPUT button on 
the top control or the VIDEO button on the remote control.
1

Video
Input	Menu
Input	Source	Selection	(Video,	S-video)
Video	Input
Direct	Operation
Menu	Operation
When video input signal is connected to the 
VIDEO jack, select Video.Video
When video input signal is connected to the S-
VIDEO jack, select S-video.S-video
Note:
 • Network  is  for  the  Network  function.  See  the  owner’s 
manual of “Network Set-up and Operation” .
 •...

4

Video	Input
Choose Computer	1(Component)  or Computer	1(Scart)  by  pressing  the  INPUT  button  on  the  top  control  or 
press the COMPUTER button on the remote control.
Before  using  these  buttons,  correct  input  source  should  be  selected  through  Menu  operation  as  described 
below.
Input	Menu
Input	Source	Selection	(Component,	RGB	Scart	1-pin)
Direct	Operation
Menu	Operation
Note: 
 • Network is for the Network function. See the owner’s manual of “Network Set-up and...

43

Video	Input
Video	System	Selection
1AV	System	Menu	(Video	or	S-video)
AV	System	Menu	(Component)

If the projector can not reproduce proper video image, 
select a specific broadcast signal format from among PAL, 
SECAM,	NTSC, NTSC	4 .43, PAL-M and	PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The projector automatically detects an incoming video 
signal, and adjusts itself to optimize its performance.
If the projector can not reproduce proper video image, select 
a specific component video signal...

44

Image	Select	Menu
Select the desired image mode among Dynamic, Standard, 
Cinema, Blackboard	(Green), Colorboard, Image	1, 
Image	, Image	3 and Image	4 by pressing the IMAGE 
button on the remote control.
Standard
Picture mode adjusted with fine tone.
Cinema
Image	1–4
IMAGE	button
Dynamic
Cinema
Blackboard	(Green)
Dynamic
Standard
Remote	Control
IMAGE	button
Direct	Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset...

45

Video	Input
Image	Adjustment
1

Press the Point ◄ button to decrease the contrast; press the 
Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press  
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten red tone; press the Point 
► button to deepen red tone (from 0 to 63).
white	balance	(Red)
Press the Point ◄ button to lighten green tone; press the 
Point ► button to...

46

Video	Input
Use  the  Point ◄►  buttons  to  adjust  the  gamma  value  to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press the Point ◄ button to decrease the sharpness of the 
image; Press the Point ► button to increase the sharpness 
of the image (from 0 to 15).
Sharpness
An interlaced video signal can be displayed in progressive 
mode. Select one of the following options.
 Off .........  Disabled.
 L1 ..........  For an active picture.
 L ..........  For a still picture....

4

Video	Input
This projector has the picture screen resize function, which enables you to customize the image size.
Screen	Menu1

Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
Adjust the screen scale and position manually with this 
function.
Press the Point ► button at Custom and the Custom is
displayed on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
 Scale	H/V ..........  Adjust the Horizontal/Vertical...

48

Language
The language used in the On-Screen Menu is available in 
English,	German,	French,	Italian,	Spanish,	Portuguese, 
Dutch,	Swedish,	Finnish,	Polish, Hungarian,	Romanian, 
Russian,	Chinese,	Korean, japanese	and Thai.
Setting	Menu
Setting
Press the MENU button to display the On-Screen 
Menu.  Press the Point ▲▼ buttons to select Setting 
and press the Point ► or the SELECT button to access 
the submenu items.
1
Use the Point ▲▼ buttons to select the desired item 
and then press the Point ►...

49

Setting
Note:
 • Auto	Keystone corrects vertical distortion only, not 
correct horizontal distortion.
 • The Auto Keystone function can not work when the 
Ceiling	is set On in the Setting menu (p.54).
 • Perfect correction of the image distortion can not 
be ensured with the Auto setup function. If the 
distortion is not corrected properly by pressing the 
AUTO SETUP/CANCEL button, adjust manually 
by pressing the KEYSTONE button on the remote 
control or selecting Keystone in the Setting menu...

50

Keystone
Select the background screen for when no input signal is 
detected. Press the Point ▲▼ buttons to switch between 
each option.
 Blue . . . Blue colored background.
 User. . . The image you captured.
 Black  . . Black colored background.
Setting
KeystoneThis function is used to adjust keystone distortion of the  
projected image. Use the Point ▲▼ buttons to choose the 
item you want to adjust.
Adjust the Horizontal/Vertical keystone distortion of the  
projected image.
Standard 
 Corner...