Eiki Eip-4500l Dlp Projector Owners Manual

96
To  AC socket
Power cord
ENTER button
MENU button
H&V LENS 
SHIFT
buttonSTANDBY-ON button
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
•Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
1Connect the power cord.
•Plug the power cord into the AC socket
of the projector.
2Reset the lamp timer.
For Lamp 1
•When you reset the timer for AH-45001,...

97
Computer Compatibility Chart
•Multiple signal support
Horizontal Frequency: 15–126 kHz
Vertical Frequency: 43–200 Hz
Pixel Clock: 12–230 MHz
Sync signal: Compatible with TTL level
Computer
PC/
MACPC/
MACHorizontal 
Frequency
(kHz)Vertical 
Frequency
(Hz)Horizontal 
Frequency
(kHz)Vertical 
Frequency
(Hz)
VGA
PCPC
SVGA
XGAVESA 
Standard Resolution
640 
× 350
1,152 
× 864
1,152 
× 882
1,280 
×1,024
1,400 
×1,050 720 
× 350
640 
× 400
720 
× 400
640 
× 480
800 
× 600
1,024 
× 768Display
Upscale
True 27.0...

98
Note
•This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, turn off the LCD display on the notebook computer and output the display data
in “CRT only” mode. Details on how to change display modes can be found in your notebook computer
owner’s manual.
•When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen.
•When projecting the RGB interlace signal using INPUT 1/2 with “Signal Type” set to...

99
Troubleshooting
Check
•Projector power cord is not plugged into the wall outlet.
•Power to the external connected devices is off.
•The selected input mode is wrong.
•Cables incorrectly connected to side panel of the projector.
•Remote control batteries have run out.
•External output has not been set when connecting notebook computer.
•Cables incorrectly connected to the side panel of the projector.
•“Bright” is set to minimum position.
•The “BLACK SCREEN” function is working.
•Image adjustments are...

100
CheckProblemPage
All buttons on the
projector and the remote
control are unavailable.
Picture is green on
INPUT 1or 2
(COMPONENT).
Picture is pink (no green)
on INPUT 1, 2 or 3
(RGB).
Picture is too bright and
whitish.
The cooling fan
becomes noisy.
The lamp does not light
up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes
flickers.
The lamps take a long
time to turn on.
Picture is dark.•If the “Stack Setting” menu is set to “Slave” and the...

101
Specifications
DLPTM Projector
EIP-4500
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480 I/DTV480P/DTV540P/DTV576 I/DTV576P/DTV720P/DTV1035 I/DTV1080 I
Single Chip Digital Micromirror Device
TM  (DMDTM) by Texas Instruments
Panel size: 0.7
No. of dots:  786,432 dots (1,024 [H]  × 768 [V])
1.2  × electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard \
equipment with EIP-4500)
250 W  × 2
15-pin mini D-sub connector
Y:  1.0 Vp-p, sync negative, 75  Ω terminated
P
B: 0.7 Vp-p, 75  Ω...

102
Glossary
Advanced intelligent compression (Page 97)
High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.
Aspect ratio (Page 48)
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync (Page 70)
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background (Page 77)
Initial setting image projected...

103 AC socket............................................................ 37
ADJ./MOUSE switch............................................ 18
Adjustment buttons.............................................. 56
Adjustment feet.................................................... 39
Advanced intelligent compression....................... 97
Aspect ratio.......................................................... 48
Audio.................................................................... 72
AUDIO input (1)...

A-Key to better communications
U.S.A.
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel: 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Te l: 06126-9371-0
Fax : 06126-9371-14
E-Mail : [email protected]
Canada
EIKI CANADA - Eiki International, Inc.
P .O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Te l: 800-563-3454 (705)-527-4084...