Eiki Eip-1600t Dlp Projector Owners Manual

37
: Cutout area on which images cannot be projected.
Computer
Input Signal
STRETCHOutput screen image
ComputerImage
typeSIDE BAR
1280K720 Resolution lower than
XGA
XGA
(1024K768)
4:3 aspect
ratio
16:9 aspect
ratio
CINEMA
ZOOMDOT BY DOT
4:3 aspect
ratio
About Copyrights
• When using the RESIZE function to select an image size with a different aspect ratio
to a TV program or video image, the image will look different from its original appear-
ance. Keep this in mind while choosing an image size.
• The use...

38
Operating with the Remote Control
Freezing a Moving Image
PresshFREEZE.• The projected image is frozen.
PresshFREEZE again to return
to the moving image from the cur-
rently connected device.
1
2
Shifting the Projected Im-
age Vertically (Image Shift)
PressPIMAGE SHIFT.• The image moves up.
PressRIMAGE SHIFT.• The image moves down.
For easier viewing, this function shifts
the entire image projected on the
screen up or down when projecting 16:9
images from DVD players or other con-
nected devices....

39
The following shows the items that can be set in the projector.
The selectable items vary depending on the selected input, input signals, or adjustment
values. Items that cannot be selected will be greyed out.
Menu Items
“C.M.S.”
PAGE 2
“Picture” menu
Picture Mode
K 7500
1
CLR TempBrilliantColor™
C. M. S.
Progressive
3D Progressive
DNR
Level 1
IRIS
High Brightness Picture INPUT 1
SEL./ADJ.
RETURNSingle ADJ
END Reset
Standard
Lamp Setting
Bright
C. M. S. - Hue
0
0
0
0C. M. S. - SaturationC. M. S. -...

40
“Fine Sync” menu
Clock
Phase0
0
0
0
H-PosV-Pos
Special Modes
Cur. sig. freq : H 33.8 kHz / V 60 Hz Auto Sync
On 1080I Fine Sync INPUT 5
SEL./ADJ.
RETURNENTER
END Reset
Options 2 INPUT 1
SEL./ADJ.
RETURNENTER
END STANDBY Mode
Eco
Fan Mode
Normal RS-232C
9600 bps PRJ Mode
Front
All reset
Language
English
Main menu Sub menuFine SyncClock
Phase
H-Pos
Reset
Special Modes 1035I
1080IPage 46Page 46
Page 46
Page 46
Page 46Auto Sync [On/Off] Page 46
Page 46
V-Pos
Cur. sig. freqPage 46
+150 -150
+150 -150
+30...

41
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
PressdMENU.• The “Picture” menu screen for the se-
lected input mode is displayed.
Adjustment buttons
(P/R/O/Q)
Example: “Picture” screen menu for INPUT 1
mode
PressQ or O to select the menu
icon to adjust.
• The selected icon is highlighted.
1
2
ENTER button
RETURN button
Menu icons
Picture INPUT 1
Picture Mode
Contrast 0
0
0
0
BrightColorTint0...

42
Using the Menu Screen (Continued)
PressP or R to select the item to
adjust.
• The selected item is highlighted.
3Picture INPUT 1
Picture Mode
Contrast 0
0
0
0
BrightColorTint0
0 Sharp
0RedBlueStandard
SEL./ADJ.
RETURNSingle ADJ
END
Items to be adjusted
• Press iENTER again to return to the
previous screen.
0 BrightSEL./ADJ.
RETURNRtn. Menu
END Picture INPUT 1
Note
To adjust the projected
image while watching it
PressiENTER.• The selected item (e.g. “Bright”) is dis-
played by itself at the bottom of...

43
Picture Adjustment (“Picture” menu)
Standard
Natural
Dynamic
Movie1
Movie2
Memory
Picture INPUT 1
Picture Mode
Contrast 0
0
0
0
BrightColorTint0
0 Sharp
0RedBlueStandard
Description
For standard image
A balanced color image is obtained.
A vivid image is obtained.
Makes the black levels of the
dark portions of the screen
more pronounced and vivid.
Reduces glare and creates a
subdued tone.
Allows you to store your picture
adjustment settings. The settings
stored effect each input mode.
Picture Mode
K...

44
Picture Adjustment (“Picture” menu) (Continued)
3 33 3
3Adjusting the Color
Temperature
• Values on “CLR Temp” are only for general
standard purposes.
Note
Selectable
items
5500K
6500K
7500K
8500K
9300K
10500KDescription
For lower color temperature for
warmer, reddish incandescent-like
images.
For higher color temperature for
cooler, bluish, fluorescent-like images.
Menu operation n Page 41
P
R
4 44 4
4 Adjusting the Colors
Select “C.M.S.” (Color Management System) in
the “Picture” menu and then press...

45
6 66 6
6Reducing Image Noise
(DNR)
Menu operation n Page 41
Video digital noise reduction (DNR) provides high
quality images with minimal dot crawl and cross
color noise.
Selectable items
OFF
Level 1-3Description
DNR does not function.
Sets the DNR level for viewing
a clearer picture.
Set “DNR” to “OFF” in the following cases:
• When the image is blurry.
• When the contours and colors of moving im-
ages drag.
• When TV broadcasts with weak signals are
projected.
Note
• This function is available for...

46
3 33 3
3Auto Sync (Auto Sync
Adjustment)
• Auto Sync adjustment is also performed by
pressing f AUTO SYNC on the remote con-
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments.
Note
Selectable items
On
OffDescription
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when...