Edirol R-4 Pro Portable Recorder Owners Manual
Here you can view all the pages of manual Edirol R-4 Pro Portable Recorder Owners Manual. The Edirol manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Effects settings
fig.effect-link2.eps
4Use the [SCRUB/VALUE] dial to specify the channels to
be linked.
fig.effect-play2.eps
5In the same way, set the “PLAY” and “REC” fields.
PLAY
fig.effect-rec.epsREC
fig.effect-para.eps
6Press the [DISPLAY] button.
The effect parameter screen is shown on the display.
* The effect parameter screen does not appear when 0: No Effect is
selected as the type.
7Use the [CURSOR] buttons and the [SCRUB/VALUE]
dial to set each effect parameter.
fig.effect-para2.eps
8If...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-60.png "Page 61
61
Effects settings
fig.effect-link2.eps
4Use the [SCRUB/VALUE] dial to specify the channels to
be linked.
fig.effect-play2.eps
5In the same way, set the “PLAY” and “REC” fields.
PLAY
fig.effect-rec.epsREC
fig.effect-para.eps
6Press the [DISPLAY] button.
The effect parameter screen is shown on the display.
* The effect parameter screen does not appear when 0: No Effect is
selected as the type.
7Use the [CURSOR] buttons and the [SCRUB/VALUE]
dial to set each effect parameter.
fig.effect-para2.eps
8If...")
61 Effects settings fig.effect-link2.eps 4Use the [SCRUB/VALUE] dial to specify the channels to be linked. fig.effect-play2.eps 5In the same way, set the “PLAY” and “REC” fields. PLAY fig.effect-rec.epsREC fig.effect-para.eps 6Press the [DISPLAY] button. The effect parameter screen is shown on the display. * The effect parameter screen does not appear when 0: No Effect is selected as the type. 7Use the [CURSOR] buttons and the [SCRUB/VALUE] dial to set each effect parameter. fig.effect-para2.eps 8If...
Page 62
62 Effects settings 1: 3-Band EQ 2: Graphic EQ 3: Noise Gate Effects No. Parameter nameRange of valuesDefault valuesExplanation 1MID-F 200Hz, 250Hz, 315Hz, 400Hz, 500Hz, 630Hz, 800Hz, 1kHz, 1.25Hz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz, 4kHz, 5kHz, 6.3kHz 1kHzSpecifies the center frequency of the mid-range equalizer. 2MID-Q0.5, 1.0, 2.0, 4.0, 8.02.0 Sets the range of the region centered on the Mid Freq for which the gain will change. Higher Q settings nar- row the region in which the change occurs....
Page 63
63 Effects settings 4: Enhancer 5: Comp&DeEsser 6: MS-Mic * You can adjust the stereo dispersion during recording or playback. This case is limited to MS mics that can directly output the mid and side signals. Connect the mid-signal to CH1 (CH3) and the side signal to CH2 (CH4). No.Parameter nameRange of valuesDefault valuesExplanation 1SENSE0–10050Adjusts the sensitivity of the enhanc- er effect. 2MIX0–10050 Adjusts the amount of phase-shifted sound that is to be mixed with the in- put....
Page 64
![Page 64
64
System setup
You can make settings related to the R-4 Pro system when performing initial settings for recording or
playback. Press the R-4 Pro [SYSTEM] button to enter the system setup menu. See “Example
operations” (p. 65) for setup procedures.
No.Menu itemSummarySee
1Recording SetupAllows you to make recording settings.p. 65
2Player SetupAllows you to make playback settings.p. 65
3SpeakerTurns the speaker on/off.p. 65
4LCD SetupAllows you to make display settings.p. 65
5System SetupAllows you to...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-63.png "Page 64
64
System setup
You can make settings related to the R-4 Pro system when performing initial settings for recording or
playback. Press the R-4 Pro [SYSTEM] button to enter the system setup menu. See “Example
operations” (p. 65) for setup procedures.
No.Menu itemSummarySee
1Recording SetupAllows you to make recording settings.p. 65
2Player SetupAllows you to make playback settings.p. 65
3SpeakerTurns the speaker on/off.p. 65
4LCD SetupAllows you to make display settings.p. 65
5System SetupAllows you to...")
64 System setup You can make settings related to the R-4 Pro system when performing initial settings for recording or playback. Press the R-4 Pro [SYSTEM] button to enter the system setup menu. See “Example operations” (p. 65) for setup procedures. No.Menu itemSummarySee 1Recording SetupAllows you to make recording settings.p. 65 2Player SetupAllows you to make playback settings.p. 65 3SpeakerTurns the speaker on/off.p. 65 4LCD SetupAllows you to make display settings.p. 65 5System SetupAllows you to...
Page 65
![Page 65
65
System setup
You can use the same procedure to make the settings listed below. As an example, we will show how to
make Recording Setup settings.
Recording Setup
Player Setup
Speaker
LCD Setup
System Setup
fig.recording-1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.recording-2.eps
2Use the [CURSOR] buttons to choose 1 Recording Setup,
and press the [ENTER] button.
The Recording Setup screen is shown.
3Use the [SCRUB/VALUE] dial to choose the Input...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-64.png "Page 65
65
System setup
You can use the same procedure to make the settings listed below. As an example, we will show how to
make Recording Setup settings.
Recording Setup
Player Setup
Speaker
LCD Setup
System Setup
fig.recording-1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.recording-2.eps
2Use the [CURSOR] buttons to choose 1 Recording Setup,
and press the [ENTER] button.
The Recording Setup screen is shown.
3Use the [SCRUB/VALUE] dial to choose the Input...")
65 System setup You can use the same procedure to make the settings listed below. As an example, we will show how to make Recording Setup settings. Recording Setup Player Setup Speaker LCD Setup System Setup fig.recording-1.eps 1Press the R-4 Pro [SYSTEM] button. The System Menu screen is shown in the display. fig.recording-2.eps 2Use the [CURSOR] buttons to choose 1 Recording Setup, and press the [ENTER] button. The Recording Setup screen is shown. 3Use the [SCRUB/VALUE] dial to choose the Input...
Page 66
![Page 66
66
System setup
fig.recording-1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.recording-2.eps
2Use the [CURSOR] buttons to select 6 Timecode, and
press the [ENTER] button.
The Recording Setup screen is shown.
fig.recording-2.eps
3Use the [CURSOR] buttons to select 1 Setup, and press
the [ENTER] button.
The Recording Setup screen is shown.
fig.recording-3.eps
4Use the [SCRUB/VALUE] dial to select the Mode value.
The setting is applied as soon as you select...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-65.png "Page 66
66
System setup
fig.recording-1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.recording-2.eps
2Use the [CURSOR] buttons to select 6 Timecode, and
press the [ENTER] button.
The Recording Setup screen is shown.
fig.recording-2.eps
3Use the [CURSOR] buttons to select 1 Setup, and press
the [ENTER] button.
The Recording Setup screen is shown.
fig.recording-3.eps
4Use the [SCRUB/VALUE] dial to select the Mode value.
The setting is applied as soon as you select...")
66 System setup fig.recording-1.eps 1Press the R-4 Pro [SYSTEM] button. The System Menu screen is shown in the display. fig.recording-2.eps 2Use the [CURSOR] buttons to select 6 Timecode, and press the [ENTER] button. The Recording Setup screen is shown. fig.recording-2.eps 3Use the [CURSOR] buttons to select 1 Setup, and press the [ENTER] button. The Recording Setup screen is shown. fig.recording-3.eps 4Use the [SCRUB/VALUE] dial to select the Mode value. The setting is applied as soon as you select...
Page 67
![Page 67
67
System setup
fig.recording-1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.data-1.eps
2Use the [CURSOR] buttons to select 7 Date & Time, and
press the [ENTER] button.
The Date & Time screen is shown.
fig.data-2.eps
3Use the [CURSOR] buttons and the [SCRUB/VALUE]
dial to set the date and time.
When finished making settings, press the [EXIT] button.
You are returned to the System Menu screen.
* If you decide to cancel, press the [EXIT] button.
4Press the...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-66.png "Page 67
67
System setup
fig.recording-1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.data-1.eps
2Use the [CURSOR] buttons to select 7 Date & Time, and
press the [ENTER] button.
The Date & Time screen is shown.
fig.data-2.eps
3Use the [CURSOR] buttons and the [SCRUB/VALUE]
dial to set the date and time.
When finished making settings, press the [EXIT] button.
You are returned to the System Menu screen.
* If you decide to cancel, press the [EXIT] button.
4Press the...")
67 System setup fig.recording-1.eps 1Press the R-4 Pro [SYSTEM] button. The System Menu screen is shown in the display. fig.data-1.eps 2Use the [CURSOR] buttons to select 7 Date & Time, and press the [ENTER] button. The Date & Time screen is shown. fig.data-2.eps 3Use the [CURSOR] buttons and the [SCRUB/VALUE] dial to set the date and time. When finished making settings, press the [EXIT] button. You are returned to the System Menu screen. * If you decide to cancel, press the [EXIT] button. 4Press the...
Page 68
![Page 68
68
System setup
fig.pj-name1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.pj-name2.eps
2Use the [CURSOR] buttons to select 8 Project Name, and
press the [ENTER] button.
The Project Name screen is shown.
fig.pj-name3.eps
3Use the [CURSOR] buttons to select the name you want
to edit, and press the [ENTER] button.
A screen for editing the project name is shown.
4Use the [CURSOR] buttons, [SCRUB/VALUE] dial,
[CLEAR] button, and [MARK] button to edit the...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-67.png "Page 68
68
System setup
fig.pj-name1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.pj-name2.eps
2Use the [CURSOR] buttons to select 8 Project Name, and
press the [ENTER] button.
The Project Name screen is shown.
fig.pj-name3.eps
3Use the [CURSOR] buttons to select the name you want
to edit, and press the [ENTER] button.
A screen for editing the project name is shown.
4Use the [CURSOR] buttons, [SCRUB/VALUE] dial,
[CLEAR] button, and [MARK] button to edit the...")
68 System setup fig.pj-name1.eps 1Press the R-4 Pro [SYSTEM] button. The System Menu screen is shown in the display. fig.pj-name2.eps 2Use the [CURSOR] buttons to select 8 Project Name, and press the [ENTER] button. The Project Name screen is shown. fig.pj-name3.eps 3Use the [CURSOR] buttons to select the name you want to edit, and press the [ENTER] button. A screen for editing the project name is shown. 4Use the [CURSOR] buttons, [SCRUB/VALUE] dial, [CLEAR] button, and [MARK] button to edit the...
Page 69
![Page 69
69
System setup
fig.hd-uti1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.hd-uti2.eps
2Use the [CURSOR] buttons to select 9 HDD Utility, and
press the [ENTER] button.
The HDD Utility screen is shown.
* If you decide to cancel, press the [EXIT] button.
format
3Use the [CURSOR] buttons to select either “Format” or
“Check,” and press the [ENTER] button.
fig.hd-uti3.eps
4The display displays the “Are you sure?” confirmation
message. Use the [CURSOR] buttons to...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-68.png "Page 69
69
System setup
fig.hd-uti1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.hd-uti2.eps
2Use the [CURSOR] buttons to select 9 HDD Utility, and
press the [ENTER] button.
The HDD Utility screen is shown.
* If you decide to cancel, press the [EXIT] button.
format
3Use the [CURSOR] buttons to select either “Format” or
“Check,” and press the [ENTER] button.
fig.hd-uti3.eps
4The display displays the “Are you sure?” confirmation
message. Use the [CURSOR] buttons to...")
69 System setup fig.hd-uti1.eps 1Press the R-4 Pro [SYSTEM] button. The System Menu screen is shown in the display. fig.hd-uti2.eps 2Use the [CURSOR] buttons to select 9 HDD Utility, and press the [ENTER] button. The HDD Utility screen is shown. * If you decide to cancel, press the [EXIT] button. format 3Use the [CURSOR] buttons to select either “Format” or “Check,” and press the [ENTER] button. fig.hd-uti3.eps 4The display displays the “Are you sure?” confirmation message. Use the [CURSOR] buttons to...
Page 70
![Page 70
70
System setup
fig.hd-uti1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.hd-uti2.eps
2Use the [CURSOR] buttons to select 10 USB Storage
Utility
, and press the [ENTER] button.
When the connection to an external memory device is not
mounted, the USB Storage Utility starts as shown in the
figure to the right.
* A connected external memory device cannot not be loaded if it is not
mounted.
format
hd-uti2.eps
When the connection to an external memory device...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-69.png "Page 70
70
System setup
fig.hd-uti1.eps
1Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.hd-uti2.eps
2Use the [CURSOR] buttons to select 10 USB Storage
Utility
, and press the [ENTER] button.
When the connection to an external memory device is not
mounted, the USB Storage Utility starts as shown in the
figure to the right.
* A connected external memory device cannot not be loaded if it is not
mounted.
format
hd-uti2.eps
When the connection to an external memory device...")
70 System setup fig.hd-uti1.eps 1Press the R-4 Pro [SYSTEM] button. The System Menu screen is shown in the display. fig.hd-uti2.eps 2Use the [CURSOR] buttons to select 10 USB Storage Utility , and press the [ENTER] button. When the connection to an external memory device is not mounted, the USB Storage Utility starts as shown in the figure to the right. * A connected external memory device cannot not be loaded if it is not mounted. format hd-uti2.eps When the connection to an external memory device...