Edirol R-4 Pro Portable Recorder Owners Manual
Here you can view all the pages of manual Edirol R-4 Pro Portable Recorder Owners Manual. The Edirol manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
Playing back
After performing the steps described in “Connections before playback” (p. 37) and “Setup before
playback” (p. 39), proceed as follows.
1Select the project that you want to play.
From the Main screen, press the [ENTER/FINDER] button. In the Finder screen that appears, use the
[CURSOR] up/down buttons and the [SCRUB] dial to select a project. For more about the Finder
screen, refer to “Finder functions” (p. 44).
Alternatively, you can use the [PREV] button or [NEXT] button on the front...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-40.png "Page 41
41
Playing back
After performing the steps described in “Connections before playback” (p. 37) and “Setup before
playback” (p. 39), proceed as follows.
1Select the project that you want to play.
From the Main screen, press the [ENTER/FINDER] button. In the Finder screen that appears, use the
[CURSOR] up/down buttons and the [SCRUB] dial to select a project. For more about the Finder
screen, refer to “Finder functions” (p. 44).
Alternatively, you can use the [PREV] button or [NEXT] button on the front...")
41 Playing back After performing the steps described in “Connections before playback” (p. 37) and “Setup before playback” (p. 39), proceed as follows. 1Select the project that you want to play. From the Main screen, press the [ENTER/FINDER] button. In the Finder screen that appears, use the [CURSOR] up/down buttons and the [SCRUB] dial to select a project. For more about the Finder screen, refer to “Finder functions” (p. 44). Alternatively, you can use the [PREV] button or [NEXT] button on the front...
Page 42
![Page 42
42
Playing back
You can assign markers at desired locations in a project. Then you can use the button or
button to move backward or forward to a marker location.
You can use the Mark function either while playing or while recording.
1Use the [NEXT] button or the [SHUTTLE] dial to find the location at which
you want to assign a marker.
Play, fast-forward, or rewind the project to the location at which you want to assign a marker.fig.mark-1.eps
2Press the [MARK] button at the location at which
you want...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-41.png "Page 42
42
Playing back
You can assign markers at desired locations in a project. Then you can use the button or
button to move backward or forward to a marker location.
You can use the Mark function either while playing or while recording.
1Use the [NEXT] button or the [SHUTTLE] dial to find the location at which
you want to assign a marker.
Play, fast-forward, or rewind the project to the location at which you want to assign a marker.fig.mark-1.eps
2Press the [MARK] button at the location at which
you want...")
42 Playing back You can assign markers at desired locations in a project. Then you can use the button or button to move backward or forward to a marker location. You can use the Mark function either while playing or while recording. 1Use the [NEXT] button or the [SHUTTLE] dial to find the location at which you want to assign a marker. Play, fast-forward, or rewind the project to the location at which you want to assign a marker.fig.mark-1.eps 2Press the [MARK] button at the location at which you want...
Page 43
![Page 43
43
Playing back
You can repeatedly play back between two points (A-B) in the project. Simply assign points A and B during
playback, and the playback will repeat between points A and B.
fig.repeat-a
1Play the project.
During playback, press the [A-B REPEAT] button once. The [A-B REPEAT]
button blinks, and that location becomes the starting point (A) for repeat
playback.
* If you press the STOP button after assigning point A but before assigning point B,
point A will be deleted.
fig.repeat-b
2Press the...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-42.png "Page 43
43
Playing back
You can repeatedly play back between two points (A-B) in the project. Simply assign points A and B during
playback, and the playback will repeat between points A and B.
fig.repeat-a
1Play the project.
During playback, press the [A-B REPEAT] button once. The [A-B REPEAT]
button blinks, and that location becomes the starting point (A) for repeat
playback.
* If you press the STOP button after assigning point A but before assigning point B,
point A will be deleted.
fig.repeat-b
2Press the...")
43 Playing back You can repeatedly play back between two points (A-B) in the project. Simply assign points A and B during playback, and the playback will repeat between points A and B. fig.repeat-a 1Play the project. During playback, press the [A-B REPEAT] button once. The [A-B REPEAT] button blinks, and that location becomes the starting point (A) for repeat playback. * If you press the STOP button after assigning point A but before assigning point B, point A will be deleted. fig.repeat-b 2Press the...
Page 44
![Page 44
44
Finder functions
The R-4 Pro saves projects as files on its internal hard disk. You can use the Finder functions to select a
project from numerous folders or projects within folders, to delete an unwanted project, or to copy a project
to an external memory device.
Finder functions
fig.finder-1.eps
1With project playback stopped and the Main screen (p. 18)
shown on the display, press the [ENTER/FINDER]
button. The Finder screen shown in the figure is
displayed.
Projects are shown in descending...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-43.png "Page 44
44
Finder functions
The R-4 Pro saves projects as files on its internal hard disk. You can use the Finder functions to select a
project from numerous folders or projects within folders, to delete an unwanted project, or to copy a project
to an external memory device.
Finder functions
fig.finder-1.eps
1With project playback stopped and the Main screen (p. 18)
shown on the display, press the [ENTER/FINDER]
button. The Finder screen shown in the figure is
displayed.
Projects are shown in descending...")
44 Finder functions The R-4 Pro saves projects as files on its internal hard disk. You can use the Finder functions to select a project from numerous folders or projects within folders, to delete an unwanted project, or to copy a project to an external memory device. Finder functions fig.finder-1.eps 1With project playback stopped and the Main screen (p. 18) shown on the display, press the [ENTER/FINDER] button. The Finder screen shown in the figure is displayed. Projects are shown in descending...
Page 45
![Page 45
45
Finder functions
fig.finder-1.eps
1While the Main screen is shown on the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the project you
want to delete. Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-44.png "Page 45
45
Finder functions
fig.finder-1.eps
1While the Main screen is shown on the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the project you
want to delete. Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press...")
45 Finder functions fig.finder-1.eps 1While the Main screen is shown on the display, press the [ENTER/FINDER] button. The Finder screen shown in the figure is displayed. Projects are shown in descending alphabetical order. fig.finder-select.eps 2In the Finder screen, use the [CURSOR] up/down buttons or the [SCRUB] dial to select the project you want to delete. Then press the [ENTER] button. If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you can press...
Page 46
![Page 46
46
Finder functions
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the project you
want to rename. Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-45.png "Page 46
46
Finder functions
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the project you
want to rename. Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press...")
46 Finder functions fig.finder-1.eps 1While the Main screen is shown in the display, press the [ENTER/FINDER] button. The Finder screen shown in the figure is displayed. Projects are shown in descending alphabetical order. fig.finder-select.eps 2In the Finder screen, use the [CURSOR] up/down buttons or the [SCRUB] dial to select the project you want to rename. Then press the [ENTER] button. If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you can press...
Page 47
![Page 47
47
Finder functions
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the copy source
project (the project you want to copy). Then press the
[ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-46.png "Page 47
47
Finder functions
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the copy source
project (the project you want to copy). Then press the
[ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory...")
47 Finder functions fig.finder-1.eps 1While the Main screen is shown in the display, press the [ENTER/FINDER] button. The Finder screen shown in the figure is displayed. Projects are shown in descending alphabetical order. fig.finder-select.eps 2In the Finder screen, use the [CURSOR] up/down buttons or the [SCRUB] dial to select the copy source project (the project you want to copy). Then press the [ENTER] button. If the desired project is in a folder, the hard disk (HD), or the external memory...
Page 48
![Page 48
48
Finder functions
* You cannot move a project between the hard disk and an external memory device. If you need to do this, you can
first copy the project, and then delete the copy source project.
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-47.png "Page 48
48
Finder functions
* You cannot move a project between the hard disk and an external memory device. If you need to do this, you can
first copy the project, and then delete the copy source project.
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to...")
48 Finder functions * You cannot move a project between the hard disk and an external memory device. If you need to do this, you can first copy the project, and then delete the copy source project. fig.finder-1.eps 1While the Main screen is shown in the display, press the [ENTER/FINDER] button. The Finder screen shown in the figure is displayed. Projects are shown in descending alphabetical order. fig.finder-select.eps 2In the Finder screen, use the [CURSOR] up/down buttons or the [SCRUB] dial to...
Page 49
![Page 49
49
Finder functions
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the illustration will appear.
Projects are shown in descending alphabetical order.
fig.finder-make1.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select
HD (hard disk)
located at the top level.
Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX),...](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-48.png "Page 49
49
Finder functions
fig.finder-1.eps
1While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the illustration will appear.
Projects are shown in descending alphabetical order.
fig.finder-make1.eps
2In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select
HD (hard disk)
located at the top level.
Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX),...")
49 Finder functions fig.finder-1.eps 1While the Main screen is shown in the display, press the [ENTER/FINDER] button. The Finder screen shown in the illustration will appear. Projects are shown in descending alphabetical order. fig.finder-make1.eps 2In the Finder screen, use the [CURSOR] up/down buttons or the [SCRUB] dial to select HD (hard disk) located at the top level. Then press the [ENTER] button. If the desired project is in a folder, the hard disk (HD), or the external memory device (EX),...
Page 50
![Page 50
50
Finder functions
fig.new-folder.eps
5A folder named NewFolder is created.
Projects are shown in alphabetical order, and folders are shown in
alphabetical order after the projects.
Use the [CURSOR] up/down or the [SCRUB] dial to verify that
the new folder was created.
If an identically named folder already exists, a number will be
added to the name of the newly created folder, e.g., NewFolder-1,
NewFolder-11, NewFolder-111, etc.
R-4_e_new.book 50 ページ ２００６年１１月２０日 月曜日 午後１時９分](http://img.usermanuals.tech/thumb/1691/84724/w300_R-4Pro_e2_d-49.png "Page 50
50
Finder functions
fig.new-folder.eps
5A folder named NewFolder is created.
Projects are shown in alphabetical order, and folders are shown in
alphabetical order after the projects.
Use the [CURSOR] up/down or the [SCRUB] dial to verify that
the new folder was created.
If an identically named folder already exists, a number will be
added to the name of the newly created folder, e.g., NewFolder-1,
NewFolder-11, NewFolder-111, etc.
R-4_e_new.book 50 ページ ２００６年１１月２０日 月曜日 午後１時９分")
50 Finder functions fig.new-folder.eps 5A folder named NewFolder is created. Projects are shown in alphabetical order, and folders are shown in alphabetical order after the projects. Use the [CURSOR] up/down or the [SCRUB] dial to verify that the new folder was created. If an identically named folder already exists, a number will be added to the name of the newly created folder, e.g., NewFolder-1, NewFolder-11, NewFolder-111, etc. R-4_e_new.book 50 ページ ２００６年１１月２０日 月曜日 午後１時９分