Edimax Router BR-6574n User Manual

3-4-1-3 AP Bridge-Point to Point 
 
In this mode, you can use this broadband router as a wireless network 
bridge and let all computers connected to the LAN ports of both wireless 
access points to communicate with each other. This mode supports only 
one wireless access point peer. 
 
Please note that when you select this mode, this broadband router will act 
as wireless bridge only, and will not accept other wireless clients. 
 
Also, you can connect to the wireless access point with the same...

router (maximum transfer rate 300Mbps). 
 
2.4 GHz (B+G): 2.4GHz band, only allows 
802.11b and 802.11g wireless network client to 
connect this router (maximum transfer rate 
11Mbps for 802.11b clients, and maximum 
54Mbps for 802.11g clients). 
 
2.4 GHz (G): 2.4GHz band, only allows 
802.11g wireless network client to connect this 
router (maximum transfer rate 54Mbps). 
 
2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless clients. 
It’s recommends to select this band to...

 
 
Please click ‘Apply’ to save changes you made and restart the broadband 
router, this requires about 30 seconds and the broadband router will stop 
responding (this is normal and is not malfunction). You can reconnect to 
this broadband router and continue on other settings later.   
 
You can click ‘Continue’ to continue on other settings without restart the 
broadband router, however, the changes you made will not take effect 
before you restart the broadband router.  

3-4-1-4 AP Bridge-Point to Multi-Point 
 
In this mode, you can use this broadband router as a wireless network 
bridge and let all computers connected to the LAN ports of all wireless 
access points to communicate with each other. This mode supports up to 
four wireless access point peers. 
 
Please note that when you select this mode, this broadband router will act 
as wireless bridge only, and will not accept other wireless clients. 
 
Also, you can connect to the wireless access point with the same...

router (maximum transfer rate 54Mbps). 
 
2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless clients. 
It’s recommends to select this band to maximize 
compatibility. 
Channel Number Select the channel number you wish to use; all 
access points must use the same channel. 
MAC address 1 to 4  Input the MAC address of other wireless access 
points (the access points you wish to connect). 
Set Security  Click ‘Set Security’ button to set security 
functions of this wireless...

3-4-1-5 AP  Bridge-WDS 
 
In this mode, this broadband router acts as both wireless communication 
bridge and wireless access point. This broadband router can establish 
communication with up to four WDS-compatible wireless access points, 
and let all computers connected to the LAN ports of every wireless access 
points communicate with each other. The broadband router is able to 
serve other wireless clients and acts as a wireless access point at the same 
time. 
 
 
 
Here are descriptions of every...

802.11n wireless network client to connect this 
router (maximum transfer rate 300Mbps). 
 
2.4 GHz (B+G): 2.4GHz band, only allows 
802.11b and 802.11g wireless network client to 
connect this router (maximum transfer rate 
11Mbps for 802.11b clients, and maximum 
54Mbps for 802.11g clients). 
 
2.4 GHz (G): 2.4GHz band, only allows 
802.11g wireless network client to connect this 
router (maximum transfer rate 54Mbps). 
 
2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless...

wireless client list window. 
MAC address 1 to 4  Input the MAC address of other wireless access 
points (the access points you wish to connect). 
Set Security  Click ‘Set Security’ button to set security 
functions of this wireless connection to 
improve security. Please refer to chapter 
3-2-1-7 for detailed instructions. 
 
When you finished with the settings in this page, you can click ‘Apply’ 
button to save changes you made in this page, or you can click ‘Cancel’ 
to discard changes. After you...

3-4-1-6 Universal Repeater 
 
In this mode, this broadband router acts as a wireless repeater. It will 
repeat the signal of the wireless access point you specified, to extend its 
wireless coverage. The broadband router will still accept wireless clients 
when in this mode. 
 
 
 
 
 
 
 
 
 
Modem 
BR-6574n         BR-6574n 
Universal Repeater  

Here are descriptions of every setup items: 
 
Item Name Description 
Band  Please select the radio band from one of 
following options (must be the same with the 
wireless access point you wish to connect): 
 
2.4 GHz (B): 2.4GHz band, only allows 
802.11b wireless network client to connect this 
router (maximum transfer rate 11Mbps). 
 
2.4 GHz (N): 2.4GHz band, only allows 
802.11n wireless network client to connect this 
router (maximum transfer rate 300Mbps). 
 
2.4 GHz (B+G): 2.4GHz band, only...