Edimax Router BR-6574n User Manual

3-3-4 Static DHCP Leases 
 
If you wish to assign a fixed IP address to certain computers / devices by 
DHCP, you can use this function to establish a MAC-to-IP address table 
here, so you can assign a specific IP address to a specific computer / 
network device by its MAC address.   
 
 
 
Here are descriptions of every setup items: 
 
Item Name Description 
Enable Static 
DHCP Leases Check this box to enable this function, 
otherwise uncheck it to disable this function. 
MAC Address Input the MAC...

All MAC-to-IP address entries will be listed in this page, and this 
broadband router supports up 16 static DHCP leases: 
 
 
 
To delete one or more entries listed here, please check the box of the 
mapping entry (under ‘Select’), and click ‘Delete Selected’ button.   
 
If you wish to delete all mapping entries, click ‘Delete All’ button. To 
deselect all checked boxes, click ‘Reset’ button. 
 
When you finished with the settings in this page, you can click ‘Apply’ 
button to save changes you made in...

3-4 Wireless 
 
You can setup Wireless LAN connection parameters of this broadband 
router in ‘Wireless’ menu: 
 
 
 
Please select one setting in this menu, then click ‘Apply’ to proceed. If 
you wish to go back to previous page, click ‘Previous’.  

3-4-1 Basic Settings 
 
You can set basic settings of wireless LAN here.   
 
 
 
Please select the working mode of this broadband router from ‘Mode’ 
dropdown list first:   
 
a. AP: Standard wireless AP (access point). 
 
b. Station-Infrastructure: This broadband router acts as both wireless 
communication client and server - connects to another wireless access 
point as client, and serves other wireless clients as server. 
 
c. AP Bridge-Point to Point: Connect this router with another broadband...

3-4-1-1 AP  mode 
 
In AP mode, the following settings will appear: 
 
 
 
Here are descriptions of every setup items: 
 
Item Name Description 
Band  Please select the radio band from one of 
following options: 
 
2.4 GHz (B): 2.4GHz band, only allows 
802.11b wireless network client to connect this 
router (maximum transfer rate 11Mbps). 
 
2.4 GHz (N): 2.4GHz band, only allows 
802.11n wireless network client to connect this 
router (maximum transfer rate 300Mbps). 
 
2.4 GHz (B+G): 2.4GHz band, only...

2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless clients. 
It’s recommends to select this band to maximize 
compatibility. 
ESSID  This is the name of broadband router. You can 
type any alphanumerical characters here, 
maximum 32 characters. ESSID is used to 
identify your own broadband router from 
others when there are other broadband routers 
in the same area. Default SSID is ‘default’, it’s 
recommended to change default ESSID value 
to the one which is meaningful to you,...

 
 
 
 
 
 
 
 
When you finished with the settings in this page, you can click ‘Apply’ 
button to save changes you made in this page, or you can click ‘Cancel’ 
to discard changes. After you click ‘Apply’ button, you’ll see the 
following messages: 
 
 
 
Please click ‘Apply’ to save changes you made and restart the broadband 
router, this requires about 30 seconds and the broadband router will stop 
responding (this is normal and is not malfunction). You can reconnect to 
this broadband router and...

3-4-1-2 Station-Infrastructure 
 
In Station-Infrastructure mode, you can select a wireless access point to 
become its wireless client, and also acts as wireless access point to serve 
other wireless clients. If you have the access privilege of other wireless 
access point nearby, and you wish to use that access point to access 
Internet, you can use this connection type: 
 
 
 
Here are descriptions of every setup items: 
 
Item Name Description 
Band  Please select the radio band from one of...

54Mbps for 802.11g clients). 
 
2.4 GHz (G): 2.4GHz band, only allows 
802.11g wireless network client to connect this 
router (maximum transfer rate 54Mbps). 
 
2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless clients. 
It’s recommends to select this band to maximize 
compatibility. 
ESSID  This is the name of broadband router. You can 
type any alphanumerical characters here, 
maximum 32 characters. ESSID is used to 
identify your own broadband router from 
others when there...

computer (the one you used to connect to the 
web management interface currently). 
Auto MAC Clone  If you wish to use the MAC address of wired 
LAN interface of this broadband router, 
select ‘Enable’, or select ‘Disable’ to not to 
use the MAC address of the wired LAN 
interface of this broadband router. 
 
 
When you finished with the settings in this page, you can click ‘Apply’ 
button to save changes you made in this page, or you can click ‘Cancel’ 
to discard changes. After you click ‘Apply’...