DuVoice Toshiba Strata DK24, DK56, DK96 Release 2, 3 Instructions

  
Toshiba Strata DK24, DK56, or DK96 
Release 2 or 3 
 
 
OVERVIEW 
 
Install a Toshiba PSTU single-line telephone interface card and a CRCU  
DTMF receiver card in the DK KSU. 
 
Program the Toshiba DK to support the voice processing system (VPS). 
 
Test the DK system programming and connect the VPS. 
 
Program individual stations for call forwarding. 
 
CONFIGURATION SUPPORT 
 
Applications:           Automated attendant/voice mail with call  
                        forwarding (release transfer)...

  
attached to the Toshiba. 
 
CONNECTING CABLES NEEDED 
One 25-pair cable with a male amphenol connector to connect the PSTU  
card to the Toshiba main distribution frame (MDF). 
 
One RJ-14 modular jack and 4-conductor modular cord for each VPS port. 
 
OTHER EQUIPMENT NEEDED 
A Toshiba 6520SD 20-Key LCD Electronic telephone and programming  
template. 
 
INSTALLING THE HARDWARE 
1. If you are installing a CRCU unit, the KSU power must be off.  
   Remove the PCTU or PCTUS1 (DK24 only) Common Control...

  
Press [SPKR] ## [HOLD] to end program 03. Press [SPKR] ## [HOLD] to  
end programming. 
 
TURN THE KSU POWER OFF. Wait 5 seconds, and turn the power back on.  
This is necessary for the system to recognize the slot assignments. 
 
Press [SPKR] then *#*# to re-enter system programming. 
 
3. Program 10-1 System Assignments Part 1 
 
Press [SPKR] 10 [HOLD] [SPKR] 1. 
 
Press programming key 07 (Turn LED 07 On) to allow ring (release)  
transfers. 
 
Turn LED 01 Off to enable voice-first calling to...

  
This causes the DK system to send a positive disconnect signal to the  
VPS if the DK receives an automatic release (AR) signal from the  
central office on the selected CO lines. (An AR signal indicates that  
the caller has hung-up prematurely.) 
 
Press [HOLD] [SPKR] ## [HOLD] to store these settings and end program 15. 
 
6.  Program 30 Station Class of Service 
 
Press [SPKR] 30 [HOLD] [SPKR]. Dial the 2-digit port number for VPS  
port 1 (based on the PSTU/PESU card slot number). Press *...

  
 
Press [SPKR] 33 [HOLD] [SPKR]. 
 
Dial the 2-digit port number for VPS port 1 followed by #. Dial the  
2-digit number for VPS port 2 followed by #. Press [HOLD]. This causes  
VPS port 1 to hunt to VPS port 2. 
 
If applicable, set hunting for any remaining VPS ports (2 to 3, 3 to  
4, and so on). Press [SPKR] and then repeat the procedure in the last  
step. 
 
Press [SPKR]. Dial the 2-digit port number of the last VPS port. Press  
#. Dial the 2-digit port number for the operators station. Press...

  
port. Press #. This selects all VPS ports. 
 
Identify the CO lines available to the VPS. Press programming keys 1  
through 20 (Turn the LED On) to select the corresponding CO line port  
number. (To select CO lines 21 to 36, take the handset off-hook.) 
 
Press [HOLD] [SPKR] ## [HOLD] to store these settings and end program 40. 
 
12. Program 41 Station Outgoing Call Restriction 
 
Press [SPKR] 41 [HOLD] [SPKR]. Dial the 2-digit port number for VPS  
port 1. Press * followed by the 2-digit port...

  
Press [SPKR] 82 [HOLD] [SPKR]. Dial the 2-digit port number for the  
operators station (usually 00). Press #. 
 
Identify the CO lines available to the VPS. Press programming keys 1  
through 20 (Turn the LED On) to select the corresponding CO line port  
number. (To select CO lines 21 to 36, take the handset off-hook.) 
 
Press [HOLD] [SPKR] ## [HOLD] to store these settings and end program 82. 
 
15. Program 87 Night Immediate Ringing 
 
Enable immediate night ringing for each CO line the VPS is to...

  
Easy Message Access 
You may program Message Access on Toshiba electronic phones using  
the [MW/FL] key. To do this: 
 
Press [INT]. Dial 657. Dial the lead VPS extension number. 
 
Dial 7  followed by the extension number and the subscribers security  
code, if desired. 
 
Press [INT].