Home
>
DuVoice
>
Communications System
>
DuVoice Toshiba Strata DK24, DK56, DK96 Release 2, 3 Instructions
DuVoice Toshiba Strata DK24, DK56, DK96 Release 2, 3 Instructions
View the DuVoice Toshiba Strata DK24, DK56, DK96 Release 2, 3 Instructions for free. All the DuVoice manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
Press [SPKR] ## [HOLD] to end program 03. Press [SPKR] ## [HOLD] to
end programming.
TURN THE KSU POWER OFF. Wait 5 seconds, and turn the power back on.
This is necessary for the system to recognize the slot assignments.
Press [SPKR] then *#*# to re-enter system programming.
3. Program 10-1 System Assignments Part 1
Press [SPKR] 10 [HOLD] [SPKR] 1.
Press programming key 07 (Turn LED 07 On) to allow ring (release)
transfers.
Turn LED 01 Off to enable voice-first calling to...](http://img.usermanuals.tech/thumb/5722/83610/w300_duvoice-toshiba-dk_d-2.png "Page 3
Press [SPKR] ## [HOLD] to end program 03. Press [SPKR] ## [HOLD] to
end programming.
TURN THE KSU POWER OFF. Wait 5 seconds, and turn the power back on.
This is necessary for the system to recognize the slot assignments.
Press [SPKR] then *#*# to re-enter system programming.
3. Program 10-1 System Assignments Part 1
Press [SPKR] 10 [HOLD] [SPKR] 1.
Press programming key 07 (Turn LED 07 On) to allow ring (release)
transfers.
Turn LED 01 Off to enable voice-first calling to...")
![Page 4
This causes the DK system to send a positive disconnect signal to the
VPS if the DK receives an automatic release (AR) signal from the
central office on the selected CO lines. (An AR signal indicates that
the caller has hung-up prematurely.)
Press [HOLD] [SPKR] ## [HOLD] to store these settings and end program 15.
6. Program 30 Station Class of Service
Press [SPKR] 30 [HOLD] [SPKR]. Dial the 2-digit port number for VPS
port 1 (based on the PSTU/PESU card slot number). Press *...](http://img.usermanuals.tech/thumb/5722/83610/w300_duvoice-toshiba-dk_d-3.png "Page 4
This causes the DK system to send a positive disconnect signal to the
VPS if the DK receives an automatic release (AR) signal from the
central office on the selected CO lines. (An AR signal indicates that
the caller has hung-up prematurely.)
Press [HOLD] [SPKR] ## [HOLD] to store these settings and end program 15.
6. Program 30 Station Class of Service
Press [SPKR] 30 [HOLD] [SPKR]. Dial the 2-digit port number for VPS
port 1 (based on the PSTU/PESU card slot number). Press *...")