Home > DuVoice > Communications System > DuVoice Mitel SX50 COV Instructions

DuVoice Mitel SX50 COV Instructions

Add to Favourites
    Download as PDF

    View the DuVoice Mitel SX50 COV Instructions for free. All the DuVoice manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 07/27/00 Integration Notes-Switch #534 Mitel SX50 COV Introduction This file gives basic information on integrating the Duvoice VM with Mitel SX50 telephone system. Refer to the Mitel programming for more information. Switch Hardware Required · Mitel SX50 telephone system with MS55 software. · One extension on a COV/Superset 4 card per Duvoice VM port is required. · One analog extension for the modem is recommended. If no extensions are available wire a...
    Page 2 07/27/00 BIT b-j(Abbreviated Dial Numbers)=0(Disabled) Switch Programming Continued… REG 7 71010100 BIT a(Register)=7(Register 7) BIT b(Superset4/420 Telephone message Programming)=1(Enabled) BIT d(Auxiliary Attendant Position)=1(Enabled) BIT f(Directed Call Pickup Security)=1(Enabled) REG 8 80000 BIT a(Register)=8(Register 8) BIT b(Extension Camp-on)=0(Disabled) BIT c(Trunk Camp-on)=0(Disabled) BIT d(Inward Dial Trunk Camp-on)=0(Disabled)...
    Page 3 07/27/00 Command 425-4 Station Programming MWI Lines REG 1: Extensions 301-304 01111301 01111302 01111303 01111304 Switch Programming Continued… Command 501 Trunk Programming (Auto Attendant Day And Night) REG 4 40501610000 Hunt Group 161 BIT a(Register)=4(Register 4) BIT b(Dictation Trunk)=0(Disabled) BIT c(Inter-ringing Delay)=5(5seconds) BIT d(Day Answer Mode)=0(Direct-In-Line) BIT e,f, and g(Day Answer Point)=161(Hunt Group 161) BIT...
    Start reading DuVoice Mitel SX50 COV Instructions

    Related Manuals for DuVoice Mitel SX50 COV Instructions

    All DuVoice manuals