DuVoice DV2000 Setting-up VeMail And The SMTP Server Interface Instructions

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
1 Overview 
VeMail is a feature of the DV2000 and DV2000VS, which allows the voice mail system to send 
copies of voice messages, and faxes to specified e-mail boxes as .wav and .tif files respectively.  
DV2000 is a client on the e-mail server.  DV2000 is not itself an e-mail server. 
The physical connection to the network consists of an RJ45 cable between the network and the 
10BASE T / 100 BASE TX Network Interface Card included standard in the DV2000.  The type of 
network is largely immaterial.   
This document provides information on implementation and trouble shooting of VeMail features. 
Setting-up VeMail 
To send VeMail, DV2000 must be integrated into your TCP/IP network and have the address of 
the SMTP server.  The basic steps to integrate to your network are as follows: 
¨ Edit the SMTP Server Address for VeMail 
¨ Configure network integration and adapters in the Network Neighborhood (installed by 
default). 
¨ Set the TCP/IP protocols in the Network Neighborhood. (DHCP is set by default)  
¨ (Optional) Enter the System Identity in the Network Neighborhood. 
Note: The configuration and settings for each network are unique.  This section should be 
considered to be a checklist.  For the precise settings for your application please consult with 
your network administrator. 
 
Enter SMTP Server Name/Address and Reply Address for VeMail 
From the Start menu, 
¨ Click Programs 
¨ Click DV2000 
¨ Click VeMail Configuration 
¨ Enter the name or IP address of your SMTP Server 
¨ Enter the reply address you would like to display in the “from” line of the VeMail 
messages.  (Note: this address must be a properly formatted internet e-mail address)  
¨ Click Close  
						

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
2   Setting-up Network Integration 
Note: Only a qualified network administrator should perform Network Administration tasks. 
 
Enter TCP/IP Properties 
Set-up the Network Adaptor 
¨ In Explorer, Right click on Network Neighborhood 
¨ Click Properties 
¨ Select the  tab 
¨ By default, the adaptor will be set for  If you are using some other Network 
Integration Card, load and select the appropriate adaptor, You must reboot the computer for the changes to 
take effect.  
Set the TCP/IP Protocols 
¨ Select the  tab 
¨ Highlight TCP/IP Protocol 
¨ Select Obtain an IP address from a DHCP server (default setting). 
OR 
¨ Set a static TCP/IP setting as directed by the LAN system administrator.  
   
						

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
3  Enter System Identification  
¨ Right click on Network Neighborhood. 
¨ Click Properties. 
¨ Select the  tab. 
¨ Click  
¨ Edit the Computer Name. 
¨ Click  to save your changes 
¨ Reboot the computer. (Note: After changing the machine name, you must reboot before 
trying to add it to a domain.) 
¨ Return to Network Neighborhood Properties  
¨ If you have configured the DV2000 as part of a workgroup, enter the workgroup name, click  to save your changes and you are done.  
Making DV2000 a part of the domain 
It is often desirable to make the DV2000 part of a domain to provide access to the system over 
the LAN (for example to perform maintenance and administration via the LAN instead of through 
the modem).  Inclusion in the domain is optional and usually not necessary for SMTP mail to 
work. 
¨  If you are configuring the DV2000 to be part of a domain, complete the following instructions: 
¨ Enter the Domain Name 
¨ Check  
¨ Enter the name and password of a user that is authorized to add machines to the domain, 
click  to save your changes and you are done.  
Setting up VeMail and E-mail Notification in Mailboxes  
						

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
4  There are two types of e-mail messages sent by DV2000.   
1. A VeMail message consists of an e-mail message with a .wav copy of voice-mail 
messages as an attachment.  The body of the message includes the time, date, 
origin, and length of a message. 
2. E-mail Notification is similar to pager notification and consists of an e-mail 
message, the body of which includes the number and type of message(s) in the voice 
mailbox.  There are no attachments in an e-mail notification message. 
 
Address List  
Addresses for VeMail and / or e-mail notification must be entered in the address list tab of 
each mailbox user with these features.  See the Address List section of the Mailbox 
Administration Manual for more details. 
To add addresses for a mailbox, click on the  button, and then select the address 
type and enter the definition in the Edit Address dialog. 
        You must remember to press  after adding or editing an address; 
otherwise the address will appear as “invalid” when used in a notification or delivery 
template.  
 
Message Notification 
This feature is most commonly used to deliver message notification to e-mail accounts 
on cellular telephones.  You can create a new notification template or use or edit the 
existing e-mail notification template on your system.  See the Message Notification 
Section of the Mailbox Administration Manual for more details.  
The notification itself consists of an e-mail message that states the name of the 
mailbox, and the type and number of new messages.  
						

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
5  VeMail (Message Delivery) 
Like E-mail Notification, VeMail consists of an e-mail message.  Unlike E-mail 
Notification, VeMail also includes the origin of the message and a .wav file copy of the 
message attachment that can be played on any PC or MAC with speakers and a sound 
card.  You can create a new delivery template or use or edit the existing e-mail delivery 
template on your system.   
 
See the Message Notification Section of the Mailbox Administration Manual for more 
details. 
  
 
  
A sample of an actual VeMail Message 
 
  
						

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
6  Testing and Trouble Shooting 
 
Debug Monitor and SMTP MailTest are two tools you can use to diagnose problems associated 
with sending e-mail messages from DV2000.   SMTP MailTest (below) can be run with or without 
running Debug monitor. 
 
Opening the Debug Monitor: 
On an idle system, the Debug Monitor may be opened from the Start Menu=> 
Programs=>DV2000=>Debug Monitor.  Once it is up, it will display any debug messages as they are 
generated.  
 
On a busy system (one which is answering calls), the Debug Monitor should be opened as 
follows, so that the monitor may be stopped when the e-mail process terminates.  (Otherwise, the 
monitor will continue to receive unnecessary information from other calls.) 
 
1) Open a command window: Start Menu / Programs / Command Prompt 
2) If the Command Prompt window does not show a slider bar on the right hand side, then do 
these steps to allow more data to be viewed: 
a. Click on the window icon in the upper left hand corner 
b. Click properties on the drop down menu 
c. Go to the Layout tab 
d. Adjust the Height setting in the Screen Buffer Size area to 400. 
e. Press OK 
f. Select “Modify shortcut which started this window” 
g. Press OK 
3) Change to the Pairtree32 directory: cd\Pairtree32 
4) Run the Debug Monitor: dbmon 
5) NOTE: Processes are slowed down by virtue of the Debug Monitor being open in a window.  
Processes will run faster when the Debug Monitor window is minimized. 
 
SMTP MailTest utility 
1) With the monitor open, start the SMTP MailTest utility 
2) Enter the SMTP Server’s name or IP address on the first line. 
a. The SMTP server name is the same found on any client/workstation in the office 
used to send/receive e-mail, (especially if Microsoft Outlook Express is used.) 
b. If the office has an internal MS Exchange e-mail system, than that server’s name is 
used.  To use SMTP, in the MS Exchange environment, the Internet Mail Connector 
must be installed.  
						

							             VeMail 
 Technical Notes – Setting-up VeMail and the SMTP Server Interface 
 
7  3) Specify a valid test e-mail address to send to.  
4) Send the message. 
5) If a message box opens indicating that there was an error, look for these error messages on 
the event monitor. 
a. Error Message 
 
Unknown error; connect()gethostbyname() failed! Is the 
mail server name correct? Is TCP/IP installed on this 
machine? 
  
   Corrective Action 
i. Check to make sure the mail server name or IP address is correct 
ii. Check to make sure the computer is correctly configured to communicate on 
the LAN with TCP/IP. 
1. Run the NT utility: ipconfig from a command window and verify the 
TCP/IP settings. 
b. Error Message 
 
eCEmailSocket::Connect() failed: XXXXXXXX 
 
Corrective Action 
i. Is there a proxy machine between the DV2000 and the e-mail server?  If so, 
check to make sure that proxy client software has been installed on the 
DV2000. 
ii. Try to telnet to the server: telnet servername or IP address:25.  If this does 
not work, then there is no connectivity to the server or the server does not 
support the SMTP protocol 
6) Check the e-mail address spelling carefully for any errors or try another e-mail address.  If the 
message is still not delivered, then there is some problem between the e-mail server and the 
recipient.  Try sending to a different e-mail address. 
7) Make sure that if any changes to the SMTP server name/address is discovered, that those 
changes are set also in the VeMail Configuration utility. 
8) Make sure to close Debug monitor at the competition of your testing.