DuVoice DV2000 Configuration Instructions Manual
Here you can view all the pages of manual DuVoice DV2000 Configuration Instructions Manual. The DuVoice manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 31
DV2000 Configuration - Service Release 3.0 31 PBX Integrations Menu – Transfer Tab Explanation of Fields: Call Progress Dial Codes: Transfer - The dial code to send to the PBX to place a caller on hold and then dial the requested extension. Busy - The dial code to send to the PBX to retrieve a caller from...
Page 32
DV2000 Configuration - Service Release 3.0 32 PBX Integrations Menu – Inband Tab PBX dialog - Inband tab Use this dialog to configure the inband signaling that the PBX sends. This step is for phone systems that perform blind transfers and send Called Party ID inband. Wait for digits time out (10ms) - the...
Page 33
DV2000 Configuration - Service Release 3.0 33 PBX Integrations Menu– Inband Tab Inband Signaling Codes: For inband signaling fields on this tab, the following are the Inband DTMF mask codes supported by DV2000: s The mailbox/extension number that was calling the extension that returned a Ring-No-Answer, Busy or...
Page 34
DV2000 Configuration - Service Release 3.0 34 PBX Integrations Menu– Inband Tab Edit Inband Signaling Codes dialog Use this dialog to modify the inband signaling codes that the PBX sends. The inband editor can be used for codes for busy, ring-no-answer, always forward, immediate record and subscriber...
Page 35
DV2000 Configuration - Service Release 3.0 35 PBX Integrations Menu – Disconnect Tab PBX dialog - Disconnect tab Use this dialog to review the disconnect time intervals that are used by your PBX switch, against your PBX manufacturers’ current revision documentation, and make modifications or create a new template....
Page 36
DV2000 Configuration - Service Release 3.0 36 Location Settings Menu Options New Location option Use this option to invoke the Location Wizard to set up additional locations. The first (Default) location was set up during installation. This option lets you enter General Information for this location, as...
Page 37
DV2000 Configuration - Service Release 3.0 37 Location Settings - New Locations Wizard Location Wizard Location Wizard - Define Enter a name to identify the location and enter the location’s mailbox choices. Location Name - For example, the name of the second business. Greetings mailbox – the mailbox...
Page 38
DV2000 Configuration - Service Release 3.0 38 Location Settings - New Locations Wizard Location Wizard - Create The Location Wizard is a set of three screens that walk you through the steps needed to create an additional location. Buttons - From all Wizard screens except the first one, if you want to...
Page 39
DV2000 Configuration - Service Release 3.0 39 Location Settings - New Locations Wizard Location Wizard - Finish Click on the Finish button to complete the process and create the new location. The final Location Wizard screen reports the mailbox choices and location name you have entered on the previous...
Page 40
DV2000 Configuration - Service Release 3.0 40 Location Settings – General Info Tab Locations dialogs Location - General Info tab The fields on this tab define this business location. These properties, along with other settings, will control the operation of the ports to which this location is assigned....