Dukane Projector 6132HD User Manual
Have a look at the manual Dukane Projector 6132HD User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
34 English ... User Controls COLOR Press ENTER into the next menu as below and then use the or button to select item. RED GAIN/GREEN GAIN/BLUE GAIN/CYAN GAIN/ MAGENTA GAIN/YELLOW GAIN/RED BIAS/GREEN BIAS/BLUE BIAS : Use the or button to select RED, GREEN, BLUE, CYAN, MAGENTA AND YELLOW COLORS. RESET: Choose “YES” to return the factory default settings for color adjustments. COLOR RED GAIN GREEN GAIN BLUE GAIN CYAN GAIN MAGENTA GAIN YELLOW GAIN RED BIAS GREEN BIAS BLUE BIAS RESET COLOR SPACE Select an appropriate color matrix type from AUTO, RGB or YUV.
35... English User Controls SCREENIMAGE SETTINGOPTIONS GENERAL 3D SETTINGS V KEYSTONE AUTO COMPUTER SELECT EXITMOVE MOVE OVERSCAN ASPECT RATIO ASPECT RATIO Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen laptops. NATIVE: This format displays the original image without any scaling. AUTO: Automatically selects the appropriate display format. OVERSCAN Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. V KEYSTONE Press the or button to adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular. Each I/O has different setting of “OVERSCAN”. SCREEN | GENERAL
36 English ... User Controls TIP: 3D supported signal • For PC Signal :1024x768@60/120Hz 1280x720@60Hz 1280x800@60/120Hz 1920x1080@60Hz • For Video Signal : 480i@60Hz• For HDMI Signal :720p (Frame Packing) 1280 x 720@50/60/59.94 1080p (Frame Packing) 1920 x [email protected]/24 720p (Top and Bottom) 1280 x 720@50/60/59.94* (*Select manually) 1080p (Top and Bottom) 1920 x [email protected]/24 1080i (Side by Side (Half)) 1920 x 1080@50/60/59.94* (*Select manually) SCREENIMAGE SETTINGOPTIONS GENERAL 3D SETTINGS 3D STRUCTURE OFF COMPUTER SELECT EXITMOVE MOVE 3D INVERT 3D OFF FRAME PACKING 3D Choose “ON” to turn this item on for 3D images. (default: OFF) 3D INVERT Choose “ON” to invert left and right frame contents. Choose “OFF” for default frame contents. 3D STRUCTURE Adjust the 3D format to display 3D content correctly. 3D STRUCTURE AUTO FRAME PACKING TOP-AND-BOTTOM SIDE-BY-SIDE FRAME SEQUENTIAL “3D INVERT” and “3D STRUCTURE ”only available when 3D is enabled. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. SCREEN | 3D SETTINGS
37... English User Controls SCREENIMAGE SETTINGOPTIONS GENERAL SIGNAL LANGUAGE ORIENTATION REMOTE SENSOR HDMI SETTINGS MUTE VOLUME ENGLISH DESKTOP REAR COMPUTER SELECT EXITMOVE MOVE ADVANCED TOP OFF LANGUAGE Choose the multilingual OSD menu. Press the or button into the sub menu and then use the or button to select your preferred language. Press ENTER to finalize the selection. LANGUAGE SELECT EXIT MOVE MOVE PLEASE SELECT A MENU LANGUAGE. ORIENTATION DESKTOP FRONT: When selected, the image is projected straight on the screen. DESKTOP REAR: When selected, the image will appear reversed. CEILING FRONT: When selected, the image will turn upside down. CEILING REAR This is the default selection. The image will appear reversed in upside down position. DESKTOP-REAR and CEILING- REAR are to be used with a translucent screen. SETTING | GENERAL
38 English ... User Controls REMOTE SENSOR Choose the remote sensor location. HDMI SETTINGS Use this feature to set HDMI1/MHL or HDMI2 VIDEO LEVEL: Select “AUTO” to automatically detect video level. If automatic detection may not work well, select “NORMAL” to disable the “ENHANCED” feature of your HDMI equipment or select “ENHANCED ” to improve image contrast and increase detail in the dark areas. AUDIO SELECT: Use this function to select the audio souce from “HDMI1/MHL ”, “HDMI2”or “COMPUTER ”. HDMI SETTINGS AUTO COMPUTER SELECT EXIT MOVE AUDIO SELECT VIDEO LEVEL HDMI1 HDMI1 HDMI2 MUTE Choose “ON” to turn mute on. Choose “OFF” to turn mute off. VOLUME Press the button to decrease the volume. Press the button to increase the volume. “HDMI SETTING” is only supported under HDMI source.
39... English User Controls SCREENIMAGE SETTINGOPTIONS GENERAL SIGNAL PHASE CLOCK H. POSITION V. POSITION COMPUTERSELECT EXITMOVE MOVE ADVANCED PHASE Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. CLOCK Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. H. POSITION Press the button to move the image left. Press the button to move the image right. V. POSITION Press the button to move the image down. Press the button to move the image up. “SIGNAL” is only supported in Analog VGA (RGB) signal. SETTING | SIGNAL
40 English ... User Controls SCREENIMAGE SETTINGOPTIONS GENERAL SIGNAL LOGO NETWORK CLOSED CAPTION SECURITY TEST PATTERN OFF COMPUTER SELECT EXITMOVE MOVE ADVANCED OFF OFF OFF LOGO Use this function to display the startup screen (NEC logo). ON: Displays the NEC logo. OFF: Not display the NEC logo. NETWORK Refer to pages 43-45. CLOSED CAPTION Use this function to enable closed caption and activate the closed caption menu. Select an appropriate closed captions option: OFF, CC1, CC2, CC3, CC4, T1, T2, T3 and T4. SECURITY OFF: Choose “OFF” to be able to switch on the projector without password verification. ON: Choose “ON” to use security verification when turning on the projector. ENTER CURRENT SECURITY CODE SECURITY KEYWORD EXIT ENTER ■ First Time: 1. The default password : puqt 2. Use the remote to enter your password, and then press ENTER to confirm your password. When “NORMAL” is selected for “STANDBY MODE” from the menu, the projector cannot be controlled in standby mode from external equipment. SETTING | ADVANCED logo. logo. (logo).
41... English User Controls SECURITYSECURITY TIMER CHANGE PASSWORD SELECT EXITMOVE SECURITY OFF ADJUST SECURITY TIMER Use this function to set how long (MONTH/DAY/HOUR) the projector can be used. Once this time has elapsed you will be requested to enter your password again. MONTH EXIT MOVE ADJUST SECURITY TIMER DAY HOUREXIT The “SECURITY TIMER” will restart to count down when the projector is turned off and then turned back on. CHANGE PASSWORD 1. Press ENTER to enter SECURITY KEYWORD setting. 2. The password has to be combination of tupq in 4 characters. Current password ENTER NEW SECURITY CODE EXIT ENTER CHANGE PASSWORD 3. Enter your old password and then press ENTER to confirm your password. Input new password ENTER NEW SECURITY CODE CHANGE PASSWORD EXIT ENTER 4. Enter your new password and then press ENTER to confirm your password. SETTING | ADVANCED | SECURITY Password default value is “ puqt” (first time).
42 English ... User Controls Confirm new password CONFIRM NEW SECURITY CODE CHANGE PASSWORD EXIT ENTER 5. Enter the new password again and press ENTER to confirm. If the incorrect password is entered 3 times, the projector will automatically shut down. When the projector is turned on again, the password entry screen will be displayed on. Enter your password. If you have forgotten your password, please contact your local office for support.
43... English User Controls NETWORK NETWORK STATUS DISCONNECT DHCP IP ADDRESS SUBNET MASK GATEWAY APPLY OFF NETWORK STATUS Display the network connection status. (default: DISCONNECT) DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect on next open. ON: Assign an IP address to the projector from an external DHCP server automatically. OFF: Assign an IP address manually. IP ADDRESS Select an IP address. SUBNET MASK Select subnet mask number. GATEWAY Select the default gateway of the network connected to the projector. APPLY Press ENTER to apply the selection. SETTING | ADVANCED | NETWORK