Dukane Projector 6132HD User Manual

							14
English ...
Introduction
Controlling the Projector over a LAN 
[Using on Windows]
Using the utility software “PC Control Utility Pro 4” that you 
can download from our web site  
(http://www.nec-display.com/dl/en/index.html), the projector 
can be controlled from a computer over a LAN.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, 
audio mute, adjusting, error message notification, event 
schedule.
Screen of PC Control Utility Pro 4
This section provides an outline of preparation for use of PC Control 
Utility Pro 4. For information on how to use PC Control Utility Pro 4, 
see Help of PC Control Utility Pro 4. (see page 16)
•   Step 1: Install PC Control Utility Pro 4 on the computer. (see page 15)
•  Step 2: Connect the projector to a LAN. (see page 16)
•  Step 3: Start PC Control Utility Pro 4. (see page 16)
TIP:
•  PC Control Utility Pro 4 can be used with a serial connection.
•   For update information on PC Control Utility Pro 4, visit our website: 
http://www.nec-display.com/dl/en/index.html
	 When the projector 
is in the standby 
condition, the Error 
Alert function of PC 
Control Utility Pro4 is 
not available.
To make this function 
available even in the 
standby condition, 
use the E-Mail Alert 
function of the 
projector. 
(PC Control Utility Pro 4 for Windows/PC Control 
Utility Pro 5 for Mac OS)
Download Service and Operating Environment
Please visit our Dukane website about the operating environment and download service 
for software. Also go to the NEC website for the latest software;
Visit   www.dukaneav.com  and go to the “Service” page for downloads and links.
http://www.dukane.com/av/service/downloads.asp
Or visit URL: http://www.nec-display.com/dl/en/index.html 
						

							15... English
Introduction
Step 1: Install PC Control Utility Pro 4 on the computer
 •  Supported OS - PC Control Utility Pro 4 will run on the following operating systems.
Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1,
Windows  7  Home  Basic,  Windows  7  Home  Premium,  Windows  7 
Professional, Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, Windows 
Vista Business, Windows Vista Enterprise, Windows Vista Ultimate 
Windows XP Home Edition *1, Windows XP Professional *1
*1:   To run PC Control Utility Pro 4, “Microsoft .NET Framework Version 2.0” is required. The Microsoft .NET Framework Version is available from 
Microsoft’s web page. Install the Microsoft .NET Framework Version 2.0, 3.0 
or 3.5 on your computer. 
1  Connect your computer to the Internet and download the updated PCCUP4 
exe file from our web site (http://www.nec-display.com/dl/en/index.html).
2  Double-click the PCCUP4. exe icon.
The Installer will start and the Wizard screen will appear.
3 Click “Next”.
“END USER LICENSE AGREEMENT” screen will be displayed.
	To install or 
uninstall the program, 
the Windows user 
account must have 
[Administrator] 
privilege (Windows 
8, Windows 7, and 
Windows Vista)
	 Exit all running 
programs before 
installation. If another 
program is running, 
the installation may 
not be completed. 
						

							16
English ...
Introduction
Read “END USER LICENSE AGREEMENT” carefully.
4   If you agree, click “I accept the terms in the license agreement” \
and then 
click “Next”.
Follow the instructions on the installer screens to complete the 
installation.
TIP:Uninstalling PC Control Utility Pro 4
•   To uninstall PC Control Utility Pro 4, do the same procedures stated as in 
“Uninstalling Virtual Remote Tool”. Read “Virtual Remote Tool” as “PC 
Control Utility Pro 4”
Step 2: Connect the projector to a LAN
Connect the projector to the LAN by following the instructions 
in “Connecting the Projector” on page 21 and “How to use web 
browser to control your projector” in pages 46-47.
Step 3: Start PC Control Utility Pro 4 Click “Start” -> “All programs” or “Programs” -> “NEC Projector 
User Supportware” -> “PC Control Utility Pro 4” -> “PC Control 
Utility Pro 4”.
TIP: Viewing the Help of PC Control Utility Pro 4
•  Displaying the Help file of PC Control Utility Pro 4 while it is running.  
Click “Help (H)” -> “Help (H)” of window of PC Control Utility Pro 4 in 
this order. 
The pop-up menu will be displayed.
•   Displaying the help file using the Start Menu.   
Click “Start” -> “All programs” or “Programs” -> “NEC Projector User 
Supportware” -> “PC Control Utility Pro 4” -> “PC Control Utility Pro 4 
Help”. 
The Help screen will be displayed.
	 For the Schedule 
function of the PC 
Control utility Pro 4 to 
work, you must have 
your computer run-
ning and not in stand-
by/sleep mode. Select 
“Power Options” from 
the “Control Panel” in 
Windows and disable 
its standby/sleep 
mode before running 
the scheduler.
[Example] For Win-
dows 7:
Select “Control 
Panel” -> “System and 
Security” -> “Power 
Options” -> “Change 
when the computer 
sleeps” -> “Put the 
computer to sleep” -> 
”Never”. 
	 When “NORMAL” 
is selected for 
“Standby Mode” from 
the menu, the projector 
cannot be controlled 
via the serial cable or 
network (wired LAN) 
connection.
	 The projector 
does not support the 
LAN automatic search 
feature of PC Control 
Utility Pro 4. To con-
nect the projector, 
register an IP address 
manually.
PC Control Utility Pro 5 for Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1   Connect your computer to the Internet and visit our website (http://www.
nec-display.com/dl/en/index.html).
2  Download the updated PC Control Utility Pro 5 from our website.
3  In Finder, control-click (“control” + click) or right click the PC Control 
Utility Pro 5.mpkg.
4  Select “Open” from the top of contextual menu that appears.
the 
						

							17... English
Introduction
5  Click “Open” in the dialog box. If prompted, enter an administrato\
r name 
and password.
The installer will start.
6   Click “Next”.
“END USER LICENSE AGREEMENT” screen will be displayed.
7  Read “END USER LICENSE AGREEMENT” and click “Next”. 
The confirmation window will be displayed.
8  Click “I accept the terms in the license agreement”.
Follow the instructions on the installer screens to complete the install\
ation.
Step 2: Connect the projector to a LAN
Connect the projector to the LAN by following the instructions in 
“Connecting the Projector”  (see page 19)
Step 3: Start PC Control Utility Pro 5
1. Open your Applications folder in Mac OS.
2. Click the “PC Control Utility Pro 5” folder.
3. Click the “PC Control Utility Pro 5” icon. 
PC Control Utility Pro 5 will start.
 
TIP: Viewing the Help of PC Control Utility Pro 5
•   Displaying the Help file of PC Control Utility Pro 5 while it is running.
•   From the menu bar, click “Help” → “Help” in this order. 
The Help screen will be displayed
•   Displaying the Help using the Dock
1. Open “Application Folder” in Mac OS.
2. Click the “PC Control Utility Pro 5” folder.
3. Click the “PC Control Utility Pro 5 Help” icon.
The Help screen will be displayed.
TIP: Uninstalling a software program
1. Put the “PC Control Utility Pro 5” folder to the Trash icon.
2. Put the configuration file of PC Control Utility Pro 5 to the Trash icon. 
• The configuration file of PC Control Utility Pro 5 is located in “/Users/ /Application Data/NEC Projector User Supportware/
PC Control Utility Pro 5”.  
	 For the Schedule 
function of the PC 
Control utility Pro 5 
to work, you must 
have your computer 
running and not in 
sleep mode. Select 
“Energy Saver” 
from the “System 
Preferences” in Mac 
and disable its sleep 
mode before running 
the scheduler.
	 When [NORMAL] 
is selected for 
[STANDBY MODE] 
from the menu, the 
projector cannot be 
turned on via the 
network. 
						

							18
English ...
Introduction
Viewing 3D Images
The projector provides 3D images to a user wearing commercially 
available LCD shutter eyeglasses.
CAUTION
Health precautions
Before viewing, be sure to read health care precautions that may be found 
in the user’s manual included with your LCD shutter eyeglasses or your 3D 
compatible content such as DVDs, video games, computer’s video files and 
the like.
To avoid any adverse symptoms, heed the following:
- Do not use LCD shutter eyeglasses for viewing any material other than 3D 
images.
- Allow a distance of 2 m/7 feet or greater between the screen and a user. 
Viewing 3D images from too close a distance can strain your eyes.
Avoid viewing 3D images for a prolonged period of time. Take a break of 15 
minutes or longer after every hour of viewing.
- If you or any member of your family has a history of light-sensitive sei-
zures, consult a doctor before viewing 3D images.
- While viewing 3D images, if you get sick such as nausea, dizziness, queasi -
ness, headache, eyestrain, blurry vision, convulsions, and numbness, stop 
viewing them. If symptoms still persist, consult a doctor.
- View 3D images from the front of the screen. Viewing from an angle may 
cause fatigue or eyestrain.
LCD shutter eyeglasses
• Use commercially available 3D eyeglasses which meet the following 
requirements:
- DLP
® Link compatible
- Support vertical refresh rate up to 144 Hz.
Steps for viewing 3D images on the projector
1. Connect the projector to your video equipment.
2. Turn on the projector, display the on-screen menu.
3. Select [3D SETTINGS] from [SCREEN] tab and then select [ON] for  [3D].
- Set for [3D INVERT] and [3D STRUCTURE] as necessary.  (see page 
36)
4. Play your 3D compatible content and use the projector to display the  image.
5. Put on your LCD shutter eyeglasses to view 3D images.
Also refer to the user’s manual accompanied with your LCD shutter 
eyeglasses for more information. 
						

							19... English
Installation
Connecting the Projector
	Make sure that the 
power plug is fully 
inserted into both 
the projector AC IN 
terminal and the wall 
outlet. 
	 The MONITOR 
OUT connector 
supports Separate sync 
signal only.
To the wall outlet
1. ........................................................................\
....................................... RS232 cable
2. ....................................................................... Computer cable (VGA) (supplied)
3. ........................................................................\
...................................... HDMI cable
4. ........................................................................\
...................................... Audio cable
5. ........................................................................\
.................... Power cord (supplied)
6. ........................................................................\
......................... Audio output cable
7. ........................................................................\
......................................... RJ45 cable
8. ........................................................................\
........................... VGA output cable
Connect to Computer/Notebook
E62405SPR
1
34
5
2
6
Audio Output
7
8External  
Display
Router / Network Switch 
						

							20
English ...
Installation
	Due to the 
difference in 
applications for each 
country, some regions 
may have different 
accessories.
	 When Deep Color 
is set to ON on your 
HDMI equipment, 
video or audio noise 
may be generated 
depending on the 
equipment or cable 
being used. Should 
this happen, set Deep 
Color to OFF (8 bit). 
Connect to Video Sources
1. ................................................... 15-Pin to 3 RCA Component/HDTV Adaptor
2. ........................................................................\
...................................... HDMI cable
3. ........................................................................\
................................................ Audio
4. ........................................................................\
.......................... Audio Cable/RCA
5. ........................................................................\
.................... Power cord (supplied)
6. ........................................................................\
.......................... Audio Cable/RCA  
7. ........................................................................\
................... Composite video cable
	
Make sure that the 
power plug is fully 
inserted into both 
the projector AC IN 
terminal and the wall 
outlet.
HDMI cable: Use High Speed HDMI® Cable.
To the wall outlet
E62405SP
R
Composite Video Output
DVD Player, Set-top Box,  HDTV receiver
1
5
6
Audio Output
43
2
7 
						

							21... English
Installation
Powering On/Off the Projector
Turn on the projector 
first and then the signal 
sources.
If you turn on the 
projector immediately 
after the lamp is 
turned off or when the 
temperature is high, 
the fans run without 
displaying an image for 
a while and then the 
projector will display 
the image.
(*)When “Normal” is 
selected for “Standby 
Mode”,the Power LED 
will turn red; when 
“Network standby” is 
selected for “Standby 
Mode”, the Power LED 
will turn orange.
POWER/STANDBY 1
	
When you first 
turn on the projec-
tor, you will get the 
Startup menu. This 
menu gives you the 
opportunity to select 
the menu languages. 
To select the language, 
use the 
, , , or  button on the remote control. Select 
your language. Refer 
to Language on page 
39.
 	 While the POWER 
indicator is blinking 
green in short cycles, 
the power cannot be 
turned off by using the 
power button.
Powering On the Projector
1.  Securely connect the power cord and signal cable. When 
connected, the POWER/STANDBY LED will turn Orange.
2.   Turn on the projector by pressing “POWER” on the remote 
control or  on the control panel. At this moment, the 
POWER/STANDBY LED will now turn Green.   
The startup screen will display in approximately 10 seconds. 
The first time you use the projector, you will be asked to 
select the preferred language and power saving mode.
3.    Turn on your source (computer, notebook, video player,etc.) 
The projector will detect your source automatically.

		If you connect multiple sources at the same time, press the 
“SOURCE” button on the control panel or direct source keys 
on the remote control to switch between inputs. 
						

							22
English ...
Installation
Powering Off the Projector
1.     Press the “POWER OFF” button on the remote control or the 
 button on the control panel to turn off the projector lamp, 
you will see a message as below on the on-screen display.
 
POWER OFF
YES NO
ARE YOU SURE?
2.   Press the “POWER OFF” button again to confirm. 
3.   
Disconnect the power cord from the electrical outlet and the 
projector. If you disconnect the power cord while viewing 
the picture and connect the power cord again, wait for at 
least one second until you connect the power cord again.
	 While the POWER 
indicator is blinking 
green in short cycles, 
the power cannot be 
turned off by using 
the power button. 
						

							23... English
Installation
Warning Indicator
   When the “STATUS” LED indicator flashes red, it 
indicates the projector has overheated. The projector will 
automatically shut itself down.
WARNING! TEMPERATURE TOO HIGH
1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.
2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C
    When the “LAMP” LED indicator turns red and the message 
below displays on-screen, the projector has detected that 
the lamp is approaching its end of life. When you see this 
message, change the lamp as soon as possible. 
WARNING! LAMP
LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!
WARNING! LAMP
LAMP WARNING
PLEASE REPLACE THE LAMP.
 

    When the “STATUS” LED indicator flashes red and the 
message below displays on-screen, it indicates the fan failed. 
Stop using the projector and disconnect the power cord from 
the electrical outlet, then contact your local dealer or our 
service center. 
WARNING! FAN LOCKED
THE PROJECTOR WILL SWITCH OFF AUTOMATICALLY.
For more information 
on STATUS LED, refer 
to page 53.