Dukane Projector 6132HD User Manual

							24
English ...
Installation
Adjusting the Projected Image
Adjusting the Height of Projector Image
The projector is equipped with the tilt foot for adjusting the 
image height.
1.   Locate the tilt foot you wish to modify on the underside of 
the projector.
2.  Rotate the tilt foot clockwise to raise the projector or 
counter clockwise to lower it. Repeat with the remaining 
feet as needed.
Tilt Foot
Tilt Foot 
						

							25... English
Installation
Adjusting the Projector’s Focus
To focus the image, slide the focus lever until the image is clear.
Focus lever 
						

							26
English ...
Installation
Adjusting Projection Image Size (Diagonal)
Projection Image Size from 85” to 100” (2.16 to 2.54 meters).
Screen SizeH1 H2L1L2
Diagonal WidthHeight widewide
inch mminch mminch mminch mminch mminch mminch mm
85.0  2159 741882 421058 6 154  481212  9 222  19 474 
90.0  2286 781992 441121 7 165  511286  10 250  20 502 
95.0  2413 832103 471183 7 177  541360  11 278  21 530 
100.0  2540 872214 491245 7 188  561434  12 306  22 558 
* This table is for user’s reference only.
L2 = Throw distance
H1 = Offset - 41.9mm
L1 = Throw distance - 251.7mm
Width
Height
Diagonal
H2
H1
L1L2
H2
H1L1
L2
Projector bottom
Screen side of projector
Center of projection window
Center of 
screen 
						

							27... English
User Controls
SCREENIMAGE SETTINGOPTIONS
GENERAL ADVANCED
PICTURE MODE
WALL COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
HUE PRESENTATION
OFF
COMPUTER
SELECT EXITMOVE MOVE
The Projector has a multilingual On Screen Display that 
allows you to make image adjustments and change a variety of 
settings.
How to operate 
1. To open the OSD, press the MENU button on the Remote Control.
2.  When OSD is displayed, use the     buttons to select any item 
in the main menu. While making a selection on a particular page, 
press the 
 button to enter sub menu.
3.  Use the     buttons to select the desired item in the sub menu 
and adjust the settings by using the  or   button. 
4.  
Select the desired item in the sub menu and press the ENTER 
button to ente r another sub menu. Press the MENU button to close 
the sub menu after adjustment.
5.    After adjusting the settings, press the MENU or EXIT button go 
back to the main menu.
6.    To exit, press the MENU button again. The OSD will be closed and 
the projector will automatically save the new settings.
On Screen Display
Main Menu
Sub Menu
If no button operation 
is made for 30 seconds, 
the OSD will be closed 
automatically.
Setting 
						

							28
English ...
User Controls
Menu Tree 
Main MenuSub Menu Settings
IMAGE
GENERAL
PICTURE MODEPRESENTATION/HIGH-BRIGHT/VIDEO/ MOVIE/SRGB/BLACKBOARD/DICOM SIM./USER1/USER2
WALL COLOROFF/RED/GREEN/BLUE/CYAN/ MAGENTA/YELLOW
BRIGHTNESS0~100
CONTRAST0~100
SHARPNESS0~32
SATURATIONDepend on source format
HUEDepend on source format
ADVANCED
GAMMAFILM/VIDEO/GRAPHICS/PC/BLACKBOARD/DICOM SIM.
BRILIANTCOLOR0~10
COLOR TEMP.LOW/MEDIUM/HIGH
DYNAMIC CON-TRASTON/OFF
COLORRED GAIN/GREEN GAIN/BLUE GAIN/ CYAN GAIN/MAGENTA GAIN/YELLOW GAIN/RED BIAS/GREEN BIAS/BLUE BIAS/RESET
COLOR SPACEAUTO/RGB/YUV
SCREEN
GENERAL
ASPECT RATIO4:3/16:9/16:10/15:9/5:4/NATIVE/AUTO
OVERSCAN0%/5%/10%
V KEYSTONE-20~+20
3D SET-TINGS
3DON/OFF
3D INVERTON/OFF
3D STRUCTUREAUTO/FRAME PACKING/TOP-AND-BOTTOM/SIDE-BY-SIDE/FRAME SEQUENTIAL
SETTINGGENERAL
LANGUAGEENGLISH / DEUTSCH / FRANÇAIS / ITALIANO /
ESPAÑOL / SVENSKA / 
ãÄ.†Cƒ/ PORTUGUÊS /
ČEŠTINA / MAGYAR / POLSKI /          /  	ÿÒim!/
?•Ö
 / NORSK / TÜRKÇE / РУССКИЙ /
ΕΛΛΗΝΙΚΑ / INDONESIA /  8§¸(ÿ#/ SUOMI /
NEDERLANDS / DANSK / ROMÂNĂ / HRVATSKI /
БЪЛГАРСКИ /  ไทย /         /              / TIẾNG VIỆT 
						

							29... English
User Controls
Main MenuSub Menu Settings
SETTING
GENERAL
ORIENTATIONDESKTOP FRONT/DESKTOP REAR/CEIL-ING FONT/CEILING REAR
REMOTE SENSORFRONT/TOP / FRONT / TOP
HDMI SETTINGSVIDEO LEVEL (AUTO/NORMAL/ENHANCED)/ AUDIO SELECT (HDMI1/HDMI2 / COMPUTER)
MUTEON/OFF
VOLUME0~31
SIGNAL
PHASEDepend on source format
CLOCKDepend on source format
H.POSITIONDepend on source format
V.POSITIONDepend on source format
ADVANCED
LOGOON/OFF
NETWORKNETWORK STATUS/DHCP/IP ADDRESS/SUBNET MASK/GATEWAY/ APPLY
CLOSED CAPTIONOFF/CC1/CC2/CC3/CC4/T1/T2/T3/T4
SECURITYSECURITY/SECURITY TIMER/CHANGE PASSWORD
TEST PATTERNON/OFF
OPTIONS
GENERAL
INPUT SEARCHON/OFF
INPUTHDMI1/HDMI2 / COMPUTER / VIDEO
FAN MODEAUTO/HIGH ALTITUDE
INFORMATION HIDEON/OFF
BACKGROUND COLORBLACK/BLUE
RESETYES/NO
LAMP/FILTER SETTINGS
LAMP LIFE REMAIN-ING
LAMP HOURS USED
FILTER HOURS USED
ECO MODENORMAL/ECO
LAMP LIFE RE-MINDERON/OFF
FILTER USAGE HOURS
CLEAR LAMP HOURSYES/NO
CLEAR FILTER HOURSYES/NO 
						

							30
English ...
User Controls
Main MenuSub Menu Settings
OPTIONS
INFORMA-TION
MODEL NO.
SERIAL NUMBER
SOURCE
RESOLUTION
SOFTWARE VERSION
ADVANCED
STANDBY MODENORMAL/NETWORK STANDBY
DIRECT POWER ONON/OFF
AUTO POWER OFF (MIN)0~180
OFF TIMER (MIN)0~995
CONTROL PANEL LOCKON/OFF 
						

							31... English
User Controls
 PICTURE MODE
There are many factory presets optimized for various types of 
images. Use the 
 or  button to select the item. 
PICTURE MODE
PRESENTATION
HIGH-BRIGHT
MOVIE VIDEO
sRGB
BLACKBOARD
DICOM SIM.
USER1
USER2
 PRESENTATION: For computer or notebook.
 HIGH-BRIGHT: Maximum brightness from PC input.
 VIDEO: This mode is recommended for typical TV program 
viewing. 
  MOVIE: For home theater.
 sRGB: Standardized accurate color.
 BLACKBOARD: This mode should be selected to achieve 
optimum color settings when projecting onto a blackboard 
(green).
 DICOM SIM.: Setting for adjusting images to approximate the 
DICOM standards .
 USER1/USER2: Memorize user’s settings.
	DICOM SIM. 
on this projector 
is a setting for 
adjusting images 
to approximate 
the DICOM 
standards and 
may not project 
images properly. 
Therefore, DICOM 
SIM. must be used 
for educational 
purposes only and 
should not be used 
for actual medical 
diagnosis.
SCREENIMAGE SETTINGOPTIONS
GENERAL ADVANCED
PICTURE MODE
WALL COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
HUE PRESENTATION
OFF
COMPUTER SELECT
EXITMOVE MOVE
IMAGE | 
GENERAL 
						

							32
English ...
User Controls
  WALL COLOR
Use this function to choose a proper color according to the wall. It 
will compensate the color deviation due to the wall color to show 
the correct image tone.
 BRIGHTNESS
Adjust the brightness of the image.
Press the  button to darken image.
Press the  button to lighten the image.
 CONTRAST
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
 Press the  button to decrease the contrast.
 Press the  button to increase the contrast.
  SHARPNESS
Adjust the sharpness of the image.
  Press the  button to decrease the sharpness.
  Press the  button to increase the sharpness. 
  SATURATION
Adjust a video image from black and white to fully saturated color.
   Press the  button to decrease the amount of saturation in the 
image.
   Press the  button to increase the amount of saturation in the 
image. 
  HUE
Adjust the color balance of red and green.
  Press the  button to increase the amount of green in the image.
  Press the  button to increase the amount of red in the image. 
Input signalBRIGHTNESS CONTRASTSHARPNESS SATURATION HUE
COMPUTER/  
HDMI (RGB) YES
YESYES NONO
COMPUTER/  
HDMI (COMPONENT) YES
YESYES YESYES
VIDEO YESYESYES YESYES
 Yes=Adjustable, No=Not adjustable 
						

							33... English
User Controls
	The Color Temp 
is not available 
when “HIGH-
BRIGHT” or 
“sRGB” is selected 
for “PICTURE 
MODE”.
SCREENIMAGE SETTINGOPTIONS
GENERAL ADVANCED
GAMMA
COLOR TEMP.
DYNAMIC CONTRAST
COLOR
COLOR SPACE FILM
LOW
COMPUTER SELECT
EXITMOVE MOVE
OFF
AUTO
BrilliantColor™
 
GAMMA
This allows you to choose a gamma table that has been fine-tuned 
to bring out the best image quality for the input.
  FILM: for home theater.
  VIDEO: for video or TV source.
  GRAPHICS: for image source.
  PC: for PC or computer source.
  BLACKBOARD: for displaying on the blackboard. 
  DICOM SIM.: for DICOM standards .
 BrilliantColor™
This adjustable item utilizes a new color-processing algorithm 
and system level enhancements to enable higher brightness while 
providing true, more vibrant colors. The range is from “0” to 
“10”. If you prefer a stronger enhanced image, adjust toward the 
maximum setting. For a smoother, more natural image, adjust 
toward the minimum setting.
 COLOR TEMP.
Adjust the color temperature. At higher temperature, the screen 
looks colder; at lower temperature, the screen looks warmer.
 DYNAMIC CONTRAST
Turning this item on allows the contrast ratio to be adjusted to the 
proper level.
IMAGE | 
ADVANCED