Dukane Imagepro 9060 Liquid Crystal Projector Users Manual

10
Appendix
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
z USB Memory Device or USB Memory Card Reader Support ....10-2
x Troubleshooting ...................................................... 10-3
c Specifications ......................................................... 10-5
v Cabinet Dimensions ............................................... 10-7
b Pin Assignments of D-Sub RGB Input Connector .. 10-7
n Compatible Input Signal List ................................... 10-8
m REMOTE 1 Connector...

10-2
10. Appendix
z USB Memory Device or USB Memory Card
Reader Support
The projector is compatible with either a USB memory device or
USB memory card reader which supports the viewer and secu-
rity features.
•To use a USB memory device or USB memory card reader,
connect the device to the USB port (type A).
•Select one of the Drive icons in the Viewer toolbar, Capture
toolbar and PC Card File setting screen. Up to four drives can
be accepted.
•To use a USB memory device as a Protect key for Security...

10-3
x Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Power Indicator
Indicator Condition
Projector Condition Note
Off
Blinking light
Steady lightGreen blinking
Orange blinking0.5 sec ON,
0.5 sec OFF
2.5 sec ON,
0.5 sec OFF
0.5 sec ON,
0.5 sec OFF
2.5 sec ON,
0.5 sec OFFThe main power is off
The projector is getting ready to turn on.
Off Timer or Sleep Timer is active.
The projector is cooling down.
On Timer is active.
The projector is...

10-4
Does not turn on
No picture
Image isn’t square to the
screen
Picture is blurred
Image is scrolling verti-
cally, horizontally or
both
Remote control does
not work
Indicator is lit or blink-
ing
Cross color in RGB
mode
USB mouse does not
work
No on-screen menu•Check that the power cable is plugged in and that the main power switch on the projector is on. See pages 1-
9 and 2-11.
•Ensure that the lens hood or the lamp cover is installed correctly. See pages 1-4 and 9-2.
•Check to see if the projector...

10-5
c Specifications
This section pr ovides technical in fo rmation about the Projector ’s per fo rmanc e.
Optical 
LCD  Panel   1.4 p-Si TFT acti ve-mat rix with Micro Lens Ar ra y, 102 4
 768 (GT5000)/1400 
1050(GT6000)  nati ve
resolution* up to 1600 
1200 with Advanced AccuBlend Technology
Lamp 275 W DC lamp 
2
Lamp Life Eco-mode 3000 hours/Normal mode 2000 hours 
Lens Options   Motoriz ed  zoom and Moto riz ed  focus
GT10RLB : F2.4  f=28.9mm 
GT19ZL : F2.0-2.7  f=48.9-63.7mm 
GT13ZLB : F2.3-2.8...

10-6
Built-in Speakers 5W
2
Po wer Requirement 100 - 120VAC / 200 - 240 VAC, 50 / 60 Hz
Input Current 8.0 A (100 - 120 VAC) / 4.0A (200 - 240 VAC) 
Po wer Consumption 800W (Lamp Normal mode)
(2 lamps) 660W (Lamp Eco mode)
1W on GT5000 / 1.5W on GT6000 (Standby)
Mechanical 
Dimensions 20.4 (W) 
9.5 (H) 
21.6 (D) / 518 mm (W) 
242 mm (H) 
548 mm (D) (not including protrusions)
Net Weight 40.6 lbs / 18.4 kg (not including lens)
Environment Operational Temperatures: 32° - 95°F (0° to 35°C), 20 - 80% humidity...

10-7
USB (MOUSE/HUB)USB (PC)PC CARD1
2
PC CONTROL
IN
IN OUT
OUT SC TRIGGER REMOTE 2REMOTE 1LAN
AC IN 
3D REFORM3D A
SELECTLENS SHIFTFOCUS ZOOMDOWN LEFT RIGHTUPZ
STATUS PC CARD 2 PC CARD 1 LAMP 1 LAMP 2 POWERON/STAND BYAUTO ADJUSTMENU
ENTERCANCELF
AUDIO
AUDIOAUDIO OUTR
R/Cr
G/Y
B/Cb
V
H/HV
RL/MONO
RL/MONORL/MONOL/MONO
SLOT 1 SLOT 2DVI
RGB OUT
RGB 1
RGB 2
VIDEOS-VIDEO
17 (0.7)
242 (9.5)
225 (8.9)
518 (20.4)259 (10.2) 2 (0.08)
548 (21.6)
6 (0.2)
135 (5.3)
Unit = mm (inch)Lens center Lens center
v Cabinet...

10-8
n Compatible Input Signal List
Signal Resolution Frequency H. Refresh Rate
( Dots ) ( kHz ) ( Hz )
NTSC – 15.734 60
PAL– 15.625 50SECAM – 15.625 50VESA 640
480 31.47 59.94
IBM 640 
480 31.47 60MAC 640 
480 31.47 60MAC 640 
480 34.97 66.67
MAC 640 
480 35 66.67VESA 640 
480 37.86 72.81VESA 640 
480 37.5 75
IBM 640 
480 39.375 75VESA 640 
480 43.269 85.01IBM 720 
350 31.469 70.09
VESA 720 
400 37.927 85.04IBM 720 
350 39.44 87.85IBM 720 
400 39.44 87.85
VESA 800 
600 35.16 56.25VESA 800 
600 37.879...

10-9
m REMOTE 1 Connector
51423
10
11 12 13 14 156 978
This connector is used for a third party external control device.
Pin No.
14
5
10
3
4,8,12,11SHORT/OPEN
SHORT
OPEN
SHORT
OPEN
SHORT
OPEN
SHORT
OPENFUNCTION
External control mode ON
External control mode OFF
POWER ON
POWER OFF
PICTURE MUTE ON
PICTURE MUTE OFF
MUTE SOUND ON
MUTE SOUND OFF
*When combinations other than specified in the above table are selected or when no optional board is inserted in the Slot 1
and 2, the input will be switched to RGB 1...

10-10
15243
67 98
Cable Connection
Communication Protocol
Baud rate ........................ 38400 bps
Data length ..................... 8 bits
Parity .............................. No parity
Stop bit ........................... One bit
X on/off ........................... None
Communications procedure Full duplex
NOTE: Depending on the equipment, a lower baud rate may be recommended forlong cable runs.
, PC Control Codes and Cable Connection
PC Control CodesFunction Code Data
POWER ON 02H 00H 00H 00H...