Dukane Imagepro 9060 Liquid Crystal Projector Users Manual

8-3
x List of Direct Button Combinations
CTL+  Input  (1-10) Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote buttons
for direct input selection in the Entry Edit window.
CTL+  ENTER (While  displaying  Entry  list) Displays the selected signal.
CTL+  CANCEL Returns  to  the previous menu without closing the slidebar or dialog.
CTL+  UNDO Clears all menus or adjustment/setting screens. All adjustments are saved
automatically.
CTL+...

8-4
c Menu tree
8. Using On-Screen Menu
Advanced Menu
Source Select
Adjust (Source)
Sound
Ref. Adjust
Factory Default
Projector Options
Tools
Help
Test Pattern1. RGB1
2. RGB2
3. DVI(DIGITAL)
4. Video
5. S-Video
6. Viewer
7. LAN
8. Slot 1
9. Slot 2
0. RGB1(Video)
Entry List
Picture
Video Adjust
Picture Management
Image Options
Option Adjust
Lens Memory
Signal Type
SoundBrightness/Contrast/Saturation/Color/Hue/Sharpness
Noise Reduction
Color Matrix
Y/C Delay
YTR Adjustment
CTR Adjustment
SweetVision...

8-5
8. Using On-Screen Menu
Advanced Menu
Source Select
Adjust (Source)
Sound
Ref. Adjust
Factory Default
Projector Options
Tools
Help
Test Pattern3D Reform
Screen 
Ref. White Balance
Ref. Color Correction
Ref. Lens Memory
 
Menu
SetupConerstone
Keystone
Screen Type
Position
Brightness R/G/B, Contrast R/G/B
Red/Green/Blue/Yellow/Magenta/Cyan/Color Gain
Set Reference Point/Use Reference Point/Return to Factory Default/
Use Point on Signal Change? Yes/No
Picture Mute during Lens Shift? Yes/No
Page 1
Page...

8-6
8. Using On-Screen Menu
Advanced Menu
Source Select
Adjust (Source)
Sound
Ref. Adjust
Factory Default
Projector Options
Tools
Help
Test PatternSettings
Status
Status
Mail Lamp Settings
Link Mode
LAN Mode
Password
SecurityMode
Communication Speed
Projector ID
Entry List Copy
Link Mode(Master/Slave, ID, Status, Connected PJ)
Reconnect
LAN Card
Projector Name
IP Address
Subnet Mask
MAC Address
Advanced
Recconect
   IP Address
   Network Type
   WEP
   DHCPStandalone/Master/Slave
4800/9600/19200/38400...

8-7
Entering Alphanumeric Characters by Using the Menu
Alphabet or numeric characters are used for your IP address or
projector name. To enter IP Address or projector name, use the
software keyboard.
For using the software keyboard, see page 10-10.
Entering Alphanumeric Characters by Using the Remote
Control Numeric Buttons
Input alphanumeric characters by selecting one character at a
time with the numeric (Source/Input) buttons 1through 10(0) and
by moving the cursor with the SELECT  button. After...

8-8
Edit .............. Enables you to change source names or assign
the direct key.
Source Name
Enter a signal name. Up to 18 alphanumeric char-
acters can be used.
Input Terminal
Change the input terminal. RGB1 and RGB2 are
available for RGB signal; Video and S-Video are
available for composite signal.
Direct key
You can assign specific remote keys for direct
signal input selection.
Lock
Set so that the selected signal cannot be deleted
when All Delete is executed. The changes can-
not be saved.
Skip...

8-9
SweetVision
The SweetVision feature provides improvement of contrast us-
ing a proprietary detail enhancement technology.
NOTE: This feature is not available for 480p, 576p and HDTV signals.
Off ............... Turns off the SweetVision feature
Low .............. Selects low level
Medium ....... Selects medium level
High ............. Selects high level
Split Mode
This feature turns on or off to show the effect of the Sweet Vision.
NOTE: When the projector is turned off, the Split Mode will return to...

8-10
Selecting Gamma Correction Mode
Use the  or  buttons to choose one mode from three options.
Each mode is recommended for :
Dynamic ...... For true color reproduction of natural tones
Natural ......... Normal settings
Black Detail . For dark portions of a picture
Selecting Color Correction
Adjusts red, green, blue, yellow, magenta, cyan and color gain
each independently to correct the tint on whole screen.
Adjusting Color Temperature
This feature adjusts the color temperature using the slide bar....

8-11
Sync Protection
When a VCR, DVD, or some other equipment that suppor ts
Copyguard (a copy prevention system) is played back, the screen
may be displayed in a curved manner. Adjustments are made in
such circumstances. Use the SELECT  or  button to adjust
the VD level.
VD Delay
Adjustment:
This feature is used to correct vertical jitter of a signal.
NOTE: When connecting with a scan converter:
If an image from the scan converter is not correctly displayed, adjust to select the
best level point so...

8-12
Ref. Adjust
Using 3D Reform
This feature corrects trapezoidal distortion so that the projected
image is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform Save
option on Setup (See page 8-16).
Cornerstone
See page 3-4.
* When Resolution is set to Native, Cornerstone and Key-
stone are not available.
Keystone
1. Press the SELECT  or  button to adjust the horizontal keystone.
2. Press the SELECT 

 or  button to select...