Dukane Imagepro 9060 Liquid Crystal Projector Users Manual
Have a look at the manual Dukane Imagepro 9060 Liquid Crystal Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ii Important Information Precautions Please read this manual carefully be fore using your 9060 Projector. A nd keep th is ma nual handy for future re fer ence. Y our se rial number is located on the bottom of your 9060. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABI- NET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEC SER- VICE PERSONNEL. This symbol warns the user that uninsulated volt- age within the unit may be sufficient to cause elec- trical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit. This symbol alerts the user that important informa- tion concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems. W ARNING TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EX- TENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QU ALIFIED NEC SERVICE PERSONNEL. DOC Compliance Notice This Class B digital apparatus meets all requirements of the Ca- nadian Interference-Causing Equipment Regulations. 3. GSGV Acoustic Noise Information Ordinance: The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779. In UK, a BS approved power cable with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cable is not supplied with this equipment please contact your supplier. • IBM is a registered trademark of International Business Machines Cor- poration. • Macintosh and PowerBook are registered trademarks of Apple Com- puter, Inc. • Other product and company names mentioned in this users manual may be the trademarks of their respective holders. RF Interference WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Solutions, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equip- ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in- structions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings. Installation 1. For best results, use your projector in a darkened room. 2. Place the projector on a flat, level surface in a dry area away from dust and moisture. Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%. 3. Do not place your projector in direct sunlight, near heaters or heat radiating appliances. 4. Exposure to direct sunlight, smoke or steam can harm internal components. 5. Handle your projector carefully. Do not hold the lens hood and the terminal covers. Dropping or jarring can damage internal compo- nents. 6. Do not place heavy objects on top of the projector. 7. If you wish to have the projector installed on the ceiling: a. Do not attempt to install the projector y ourself. b. The projector m ust be installed b y qualified technicians in or- der to ensure proper oper ation and reduce the risk of bodily injur y. c. In addition, the ceiling m ust be strong enough to suppor t the projector and the installation m ust be in accordance with any local b uilding codes . d. Please consult y our dealer for more information. To Dealer or Installer: To prevent the projector from falling, install it in a place and fasten it in a way with sufficient strength to support the combined weight (24.0 kg/53.0 lbs) of the projector (18.4 kg/40.6 lbs), the lens (2.0 kg/4\ .4 lbs) and the ceiling mount(3.2 kg/7.1 lbs) for an extended period of time as well as to withstand earthquakes.
iii Power Supply 1. The projector is designed to operate on a power supply of 100-120 or 200-240 V 50/60 Hz AC. Ensure that your power supply fits this requirement before attempting to use your projector. 2. Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire. 3. If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet. 4. Do not touch the power plug with wet hand. Doing so can cause electrical shock or fire. 5. Do not touch the power plug during a thunder storm. Doing so can cause electrical shock or fire. Cleaning 1. Unplug the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled,use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner. 3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens. CAUTION Do not unplug the power cable from the wall outlet under any one of the following circumstances. Doing so can cause damage to the pro- jector: •While the message Please wait a moment. appears. This mes- sage will be displayed after the projector is turned off. • Immediately after the power cable is plugged into the wall outlet (the POWER indicator has not changed to a steady orange glow). • Immediately after the cooling fan stops working (The cooling fan continues to work for 90 seconds (2 minutes in the optional ex- tended li fe lamp) after the projector is tu rned off with the POWER button). CAUTION • Do not try to touch the ventilation outlets as they can become heated while the projector is turned on. • Do not put the projector on its side when the lamp is turned on. Doing so may cause damage to the projector. • Before shipping this projector, remove the lens and attach the lens hood cap. The Lens Shift mechanism may encounter damage caused by im- proper handling during transportation. • Do not eject a PC card or LAN card while its data is being ac- cessed. Doing so can damage your PC card or LAN card. Lamp Replacement •T o replace the lamp, follow all instructions provided on page 9-2. • Be sure to replace the lamp when the message The Lamp has reached the end of its usable life. Please replace the lamp. ap- pears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. • Allow a minimum of 90 seconds (2 minutes in the optional extended life lamp) to elapse after tu rning off the projecto r. Then turn off the main p ower and disconnect the p ower ca ble and all ow 60 minutes to cool the projector before replacing the lamp. • The projector must be operated with two lamp housings installed regardless of whether or not the lamp is active. Failure to do so may degrade the performance of the projector such as screen flicker or loss of lamp life. If one lamp has reached the end of its usable life, replace it with a new one as soon as possible. Fire and Shock Precautions 1. Ensure that there is sufficient ventilation and that vents are unob- structed to prevent the build-up of heat inside your projector. Allow at least 3 inches (10 cm) of space between your projector and a wall. Allow at least 12 inches (30cm) of space between the outlets on the left side (when viewed from the front) and the wall. 2. Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should f all into your projector, disconnect it immediately and have the ob- ject rem oved by a qualified se rvice personnel. 3. Do not place any liquids on top of your projector. 4. When using a LAN cable: For safety, do not connect to the connector for peripheral device wiring that might have excessive Voltage. CAUTION • Do not look into the lens while the projector is on. Serious damage to your eyes could result. •K eep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light com- ing out of the lens, can cause unpredictable outcome such as fire or injury to the eyes. • Do not cover the lens with the supplied lens hood cap or equiva- lent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output. Important Information
iv Table of Contents 1. Introduction z Whats in the Box? .................................................................... 1-2 x Introduction to the Projector ................................................... 1-3 c Getting to Know Your Projector ............................................... 1-4 Attaching the lens hood cap to the lens hood with the supplied string and rivet ............................................................................ 1-6 Carrying the Projector ................................................................. 1-6 Top Features ............................................................................... 1-7 Terminal Panel Features ............................................................. 1-8 v Remote Control Features ....................................................... 1-10 Remote Control Precautions ..................................................... 1-12 Remote Control Battery Installation .......................................... 1-12 Operating Range for Wireless Remote Control ........................ 1-12 Using the Remote Control in Wired Operation ......................... 1-13 2. Installation z Setting Up Your Projector ........................................................ 2-2 Screen Size and Projection Distance ......................................... 2-2 x Lens Shift Adjustable Range ................................................... 2-4 c Optional Lens Installation ....................................................... 2-6 v Making Connections ................................................................ 2-8 Connecting Your PC or Macintosh .............................................. 2-8 To connect Scart Output ............................................................. 2-9 Connecting an External Monitor ................................................. 2-9 Connecting Your DVD Player .................................................... 2-10 Connecting Your VCR or Laser Disc Player .............................. 2-11 Connecting to a Network .......................................................... 2-12 Connecting the Supplied Power Cable ..................................... 2-13 3. Projecting an Image (Basic Operation) z Turning on the Projector .......................................................... 3-2 x Selecting a Source ................................................................... 3-3 c Adjusting the Picture Size and Position ................................. 3-3 v Correcting the Horizontal and Vertical Keystone Distortion (3D Reform) ..................................................................................... 3-4 b Optimizing RGB Picture Automatically .................................. 3-6 n Turning Up or Down Volume .................................................... 3-6 m Turning off the Projector .......................................................... 3-7 4. Convenient Features z Turning Off the Image and Sound ........................................... 4-2 x Enlarging and Moving a Picture .............................................. 4-2 c Getting the On-line Help and Information .............................. 4-2 v Using a USB Mouse ................................................................. 4-3 b Using a USB HUB Function ..................................................... 4-3 n Changing Background Logo ................................................... 4-4 m Making Freehand Drawings on , Projected Image (ChalkBoard) ................................................ 4-4 . Lens Memory ............................................................................ 4-5 5. Using the Viewerz Making the Most out of the Viewer Function ......................... 5-2 x Operating the Viewer Function from the Projector (playback) ................................................................................. 5-3 6. Using the Projector in a Networkz End User License Agreement ................................................. 6-2 x Introduction ............................................................................... 6-3 c Supported Projectors ............................................................... 6-4 v Equipment Connections and Settings .................................... 6-5 b Software Installation ................................................................ 6-6 n Starting/Exiting the Software .................................................. 6-7 m Troubleshooting ........................................................................ 6-8 7. Setting Up for Double Stacking in Link Mode z Stacking and Connecting the Projectors ............................... 7-2 x Adjusting and Registering Signals to Be Projected .............. 7-5 c Adjusting the Lens Shift, Zoom and Focus to Clearly Display all projected patterns .............................................................. 7-5 v Link Mode Setting .................................................................... 7-5 b List of Menu Items Available in Link Mode ............................ 7-6 8. Using On-Screen Menu z Basic Menu Operation .............................................................. 8-2 x List of Direct Button Combinations ........................................ 8-3 c Menu tree ................................................................................... 8-4 v Menu Descriptions & Functions .............................................. 8-7 Adjust (Source) ........................................................................... 8-8 Picture ................................................................................. 8-8 Video Adjust ........................................................................ 8-8 Picture Management ........................................................... 8-9 Image Options ................................................................... 8-10 Option Adjust ..................................................................... 8-10 Lens Memory ..................................................................... 8-11 Signal Type ........................................................................ 8-11 Sound ....................................................................................... 8-11 Ref. Adjust ................................................................................ 8-12 Using 3D Reform ............................................................... 8-12 Screen Type ....................................................................... 8-12 Reference White Balance .................................................. 8-12 Reference Color Correction ............................................... 8-12 Reference Lens Memory ................................................... 8-13 Factory Default ......................................................................... 8-13 Projector Options ...................................................................... 8-13 Menu ................................................................................. 8-13 Setup ................................................................................. 8-15 Lamp Settings ................................................................... 8-18 Link Mode .......................................................................... 8-18 LAN Mode ......................................................................... 8-19 Setting a Password ............................................................ 8-23 Security ............................................................................. 8-24 Tools ......................................................................................... 8-25 Timer ................................................................................. 8-25 Using Capture (GT5000 only) ........................................... 8-27 Using PC Card Files .......................................................... 8-27 Using ChalkBoard ............................................................. 8-27 Help .......................................................................................... 8-27 Contents ............................................................................ 8-27 Source Information ............................................................ 8-27 Projector Information ......................................................... 8-28 Test Pattern ............................................................................... 8-28 9. Maintenancez Replacing the Lamp ......... 9-2 z Replacing or Cleaning the Filter ............................................. 9-3 x Cleaning the Cabinet and the Lens ......................................... 9-4 10. Appendix z USB Memory Device or USB Memory Card Reader Support ........10-2 x Troubleshooting ...................................................................... 10-3 c Specifications ......................................................................... 10-5 v Cabinet Dimensions ............................................................... 10-7 b Pin Assignments of D-Sub RGB Input Connector ............... 10-7 n Compatible Input Signal List ................................................. 10-8 m REMOTE 1 Connector ............................................................ 10-9 , PC Control Codes and Cable Connection .......................... 10-10 Cable Connection ................................................................... 10-10 PC Control Connector (D-SUB 9P) ......................................... 10-10 . Using Software Keyboard .................................................... 10-10 ⁄0 Operation Using an HTTP Browser ..................................... 10-11
1 Introduction ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ z Whats in the Box? .................................................... 1-2 x Introduction to the Projector ..................................... 1-3 c Getting to Know Your Projector ................................. 1-4 Attaching the lens hood cap to the lens hood with the supplied string and rivet . 1-6 Carrying the Projector ......................................................................................... 1-6 Top Features ........................................................................................................ 1-7 Terminal Panel Features ...................................................................................... 1-8 v Remote Control Features ....................................... 1-10 Remote Control Precautions ............................................................................. 1-12 Remote Control Battery Installation ................................................................... 1-12 Operating Range for Wireless Remote Control ................................................. 1-12 Using the Remote Control in Wired Operation .................................................. 1-13
1-2 z Whats in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your Projector. NOTE: Lenses a re optional. O rder lenses from your Dukane deale r. Power cab le for J apan (A C 100V) (07N080113) Document Us ers M anu al 1. Introduction 3D R E FO RM3 DA S ELE C T LENS SHIFTFO CUS Z O OM D O W N L E FT R IG HT U PZSTA TU S P C C AR D 2 P C C AR D 1 LA M P 1 LA M P 2 PO W E RO N/S TA N D B YA U TO A D JU S TMENUENTERCANCEL F Lens hood cap(024F37661) Pr ojector Te rminal co ve r (Left and Right) String (024C04541) and ri vet (024C04531) Remote control (079646633) and batter ies (AAA2) Remote cab le(073499391) Power cab le for Europe (A C 230V)(07N080003)Power cab le for Nor th Amer ica (AC 120V)(07N080208) Important Information
1-3 x Introduction to the Projector This chapter introduces you to the 9060 high end fixed installation projector and describes key features and con- trols. Congratulations on Your Pu rchase of the p rojector The 9060 is a sophisticated three panel, dual lamp XGA LCD projecto r. With the 9060 y ou will be able to project images up to 500 (measured diagonally) from y our DVD player, VCR, satellite hookup, HDTV source, PC, Work- station or Macintosh computer (desktop or notebook) and im- ages from you digital camera PC Card or compact flash memory. The Dukane 9060 incorpo rates inte grated net working access through the RJ45 input or provides for wireless network connec- tivity from an optional wireless network PC card. With extensive input and output panels, optional long life lamp, full suite of quick- change lenses and a full function remot e, the 9060 will let you immerse yourself in large screen viewing. Features you ’ll enj oy on the 9060:•Integrated RJ45 connector for wired networking ability •T wo optional modular card slots allow for future projector growth with the ability to add additional input cards • Dual PC card slots provide for optional wireless/wired network connectivity or PC Card usage • Email projector error status information to selected individuals •P ower Horizontal and Vertical lens shift for optical display cor- rections • Lens memory controls lens attributes (zoom, focus, shift) de- pending on input resolution and input selected for fast and easy source transitions • D esigned and d eveloped S weetVisio n TM technology for enhanced video image display, more vibrant colors and blacks r icher with detail • 3D Reform enhanced image technology for increased projec- tor versatility that provides for horizontal, vertical and diagonal keystone correction (allows for positioning the projector in off center locations in the room and still get aligned images) • Display 16:9 or 4:3 information and fill the screen • HDTV (1080p, 1080i, 720p) and SDTV (576p, 576i, 480p, 480i) compatibility • 9060 suppo rts a nati ve resolution of XGA (102 4 768) and • Intelligent lamp technology offers up to six user lamp settings to maximize light output or lamp life and provide for built in redundancy • Smart security settings for password protection, control panel lock, menu lock and PC card protection key to help prevent unauthorized access and adjustments to the projector •AD A508 and Executive Order 13221 Federal Government com- pliance * 1 •NEC 3D 10-bit video decoder for expanded black levels and adaptive gamma correction • High performance optional long life lamp for low total operat- ing costs • Digital photo viewer to display larger than life images from your digital cameras PC card or compact flash card • Double stackable for built in redundancy and high light output requirements • Built in 5W 2 speakers for an integrated audio solution •T wo timer settings - On/Off with programming or Sleep timer that counts down at selected intervals • 12V low voltage Screen Trigger output • Easy set up and operation • Eco-mode™ lamp technology for increased lamp life and en- ergy savings •V ORTEX Technology Plus™ for uncompromising display of video and data. Improves white level, color accuracy, dynamic range, and display of varying levels of black in an image • Wireless remote control operation • External control via RS232, USB or Network • Ad vanced AccuBlend intelligent pi xel blend ing technology pr ovides for extremely accu rate image com- pression and HDTV (1920 1080) display resolution* 2. • Supports most IBM VGA, SVGA, XGA, Macintosh, component signal (YCbCr/YPbPr) or other RGB signals within a horizon- tal frequency range of 15 to 100 kHz and a vertical frequency range of 48 to 120 Hz. This includes NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60 and SECAM standard video signals NOTE: Composite video standards are as follows: NTSC: U.S. TV standard for video in U.S. and Canada. NTSC4.43: TV standard used in Middle East countries.P AL: TV standar d used in Western Eur ope. P AL-M: TV standar d used in Brazil. P AL-N: TV standard used in Argentine, Paraguay and Uruguay . P AL60: TV standard used for NTSC playback on P AL TVs. SECAM: TV standard used in France and Eastern Europe. *1 The 9060 meets A DA508 complianc e, the latest Ame rican government regulation which provides for closed captioning, including a menu system that can be viewed by colorblind us- ers. This model also meets Executive Order 13221 require- ment for standby operation, which consumes less than 1 watt. * 2HDTV 1080P (1920 1080), HDTV 1080i (1920 1080), HDTV 720 p (128 0 720) and 160 0 1200 are displ ayed with Ad vanced AccuBlend technology on the 9060. 1. Introduction
1-4 1. Introduction AUDIO A U D IO O U T R R/Cr G/Y B/Cb V H/ HV RL/MONO RL/MONORL/MONOL/MONO DVI R G B O U T RGB 1RGB 2AUDIOS L O T 1S L O T 2 VIDEOS-VIDEO P C C O N T R O L I N I N O U T O U T S C T R I G G E RR E M O T E 2 R E M O T E 1 L A N A C I N U S B (MOUSE/HUB)U S B (P C)P C C A R D2 1 3D REFORM3D A SELECT LENS SHIFTFOCUS ZOOMDOWN LEFT RIGHTUPZ STATUS PC CARD 2 PC CARD 1 LAMP 1 LAMP 2 POWERO N /S T A N D B YAUTO ADJUST MENUENTERCANCEL F c Getting to Know Your Projector Controls *NOTE: Slot for Kensington MicroSaver Security System This security slot supports the MicroSaver® Security System.MicroSaver® is a registered trademark of Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.Lens hood Terminal panel (Left) AC INPUT Connect the supplied power cable’s three-pin plug here. Lens (optional) Lens hood capTerminal panel (Right) Foot (four) Rotate to fine-adjust the height of each foot (max. 0.6”/15mm).Built-in Security Slot ( )* Remote sensorLamp cover 1 (Right) Carrying handle Speaker 5W (Stereo)Air filter (Right) Attaching and Removing the Terminal Covers To remove the terminal cover, push and hold the latch. To attach the terminal cover, align the protrusions inside and push it until you feel it click into place. 12 A U D I O A U D I OA U D IO O U T R R / C r G / Y B / C b V H / H V RL / M O N O RL / M O N ORL / M O N O L / M O N O SLOT1 OPTION 2DVIRGB OUT RGB 1RGB 2VIDEOS-VIDEO USB A USB B PC CARD PC CONTROL IN IN OUT OUT SC TRIGGER REMOTE 2 REMOTE 1 LAN AC IN SOURCESA N/STAND BYA U T O A D J U S T
1-5 USB (MOUSE/HUB)USB (PC)PC CARD1 2 PC CONTROL IN IN OUT OUT SC TRIGGER REMOTE 2REMOTE 1LANAC IN AUDIO AUDIO AUDIO OUTR R/Cr G/Y B/Cb V H/ HVR L/MONO RL/MONORL/MONOL/MONO SLOT 1 SLOT 2 DVI RGB OUT RGB 1 RGB 2 VIDEOS-VIDEO 3D REFORM3 DA SE LEC T L E N S S H IF TFO CU SZO O MDO W N LE FTRIG HT UPZ STATUS PC CARD 2 PC CARD 1 LAMP 1 LAMP 2 POWERON/STAND BYAUTO ADJUST MENUENTERCANCEL F Depression for foot (4 locations) 1. Introduction Lamp cover 2 (Left)Remote sensor Remote sensorSpeaker 5W (Stereo) Ventilation (outlet)Ventilation (outlet) Air filter (Right) Ventilation (inlet) Remote sensor Remote sensorAir filter (Left)
1-6 Attaching the lens hood cap to the lens hood with the supplied string and rivet 1. Thread the string through the hole on the lens hood cap. Lens hood cap String 2. Use the rivet to attach the string to the bottom of the projector. AUDIO AUDIO AUDIO OUT R R/Cr G/Y B/Cb V H/HVR L/MONO RL/MONO RL/MONOL/MONO OPTION 1 OPTION 2 DVI RGB OUT RGB 1 RGB 2 VIDEOS-VIDEO Rivet 3D REFORM3D A SELECT LENS SHIFT FOCUS ZOOMDOWN LEFT RIGHTUP Z STATUS PC CARD 2 PC CARD 1 LAMP 1 LAMP 2 POWER ON/STAND BYAUTO ADJUST MENU ENTERCANCEL F Carrying the Projector Always carry your projector by the handle. Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens hood cap. CAUTION: Do not put the projector on its side when the lamp is on.Doing so may cause damage to the projector. 1. Introduction