Dukane Imagepro 9060 Liquid Crystal Projector Users Manual

							5-5
Deleting Captured Images
Using the Delete button on the tool bar for Viewer can delete
captured images.
To delete captured images:
1. Select Viewer and display a folder list of captured images.
2. Use 
 button to select the Capture folder “Cap” in the right bottom of
the screen.
3. Press the MENU button to display the tool bar.
4. Use the 
 or  button to select the Delete icon and press the ENTER
button or click with a mouse button.
Using the PC Card Files Fucntion (PC Card Files)
The PC Card Files function allows you to display a list of all the
files stored in the PC card so that you can select a file you want
to display. You can also sort files by file name or date, or display
the file. Although a list of all the files in the PC card is displayed,
you can view files in idx, text, HTML, JPEG and BMP format only.
Selecting BMP and JPEG files automatically switches to the
Viewer source. See also page 5-3.
NOTE: This option is not available for selection unless a PC card is inserted prop-erly.
Selecting Execute displays the file you selected.
When you select a JPEG or BMP file and press the ENTER but-
ton on the remote or the cabinet, or Execute on the above, you
will get a toolbar. This toolbar is used to return to the PC Card
Files screen.
Prev Play Jump Drive
View
Next Stop SelectDelete
Setup
Return ......... Returns to the PC Card Files screen.
Close ........... Close the toolbar.
ReturnClose
5. Using the Viewer 
						

							6-1
6
Using the Projector in a Network
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
z End User License Agreement ................................... 6-2
x Introduction ............................................................... 6-3
c Supported Projectors ................................................ 6-4
v Equipment Connections and Settings ...................... 6-5
b Software Installation ................................................. 6-6
n Starting/Exiting the Software .................................... 6-7
m Troubleshooting ........................................................ 6-8 
						

							6-2
Be sure to read this before using the accompanying software.
z END USER LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (LI- 
CENSE) CAREFULLY BEFORE PRESSING THE Yes BUT-
TON BELOW. BY PRESSING Yes, YOU ARE AGREEING TO
BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO
NOT AGREE TO THE TERMS OF THIS LICENSE, PRESS No
AND (IF APPLICABLE) RETURN THIS SOFTWARE TO THE
PLACE WHERE YOU OBTAINED IT FOR A REFUND. 
NEC Viewtechnology,Ltd.(NECVT) grants you (User) a license 
to use the P ROJEC TOR USER SUPPO RTW ARE (Soft-
w are) provided with this End User License Agreement (EULA).
User assumes responsibility for the selection, adoption use and
the result of use of the Software to achieve its intended result. 
1. Term
1) EULA will become eff ective upon Users ag reement to the ter ms of
EULA and shall remain in f orce until User terminates it by retur n-
ing or destro ying the Softw are and its related documents .
2) Notwithstanding the f oregoing NECVT may terminate EULA at an y
time upon User f ailing to abide by an y ter ms of EULA.  Upon the
ter mination of the EULA b y NECVT , the license g ranted to User
shall be ter minated automatically . User ag rees to destro y the Soft-
ware together with all copies of it upon such ter mination.
2. License 
User use the Software on personal computers only for operating
NECVTs projector supplied with the Software or other projector
to be specified by NECVT(Projector) 
3. Replication, modification and merger of the Software
1)User ma y make copies of the Softw are and related documentation
to the e xtent necessar y for using the Projector . User ag rees to
reproduce the NECVTs cop yright notice and other notice on an y
such copies .
2) User ma y not use , copy, modify , or otherwise dispose of the Soft-
ware , except as e xpressly per mitted in EULA.
3) No provision in EULA shall be constr ued to assign and/or transfer
any intellectual proper ty right in the Softw are to User.
4. Transfer of the Software1)User ma y transfer the Softw are to any third par ty, pro vided alwa ys
that:
a) User m ust transfer, with the Softw are, to such third par ty EULA
and all the related
documentation with all copies thereof , and must not retain an y
cop y thereof .
b) Such third par ty has agreed to the ter ms and conditions of
EULA.
2) Except as otherwise e xpressly permitted above , User ma y not sub-
license , assign, tr ansfer or otherwise dispose of the license f or the
Softw are.
5. Reverse Engineering 
User may not reverse engineer, decompile, and/or disassemble
the Software, except and only to the extent that such activity is
expressly permitted by applicable law notwithstanding this limi-
tation. 6. Limitations of Warranty
1)
Except as e xpressly specified herein, the Softw are is provided as
is without w arranty of an y kind, including b ut not limited to implied
w arranties f or fitness f or a particular pur pose, merchantability , title
and non-infr ingement of an y third party rights .
2) If User finds a mater ial defect, which eff ects to the proper oper a-
tion of the Softw are, in the media of the Softw are, NECVT will re-
place such def ective media at no charge , if such media is retur ned
to distr ibutor from which such User purchased it within 1 month
from such purchase and if NECVT deter mines that such defect is
due to NECVT .
7. Limitations of Liability
In no event shall NECVT be responsible for any indirect, conse-
quential or special damages or lost profits even if NECVT has
been advised of the possibility of such damages, and/or for any
claim for compensation or damage by any third party to User. 
8. Others
1)The v alidity , inter pretation, construction and perf ormance of EULA
shall be go ve rned b y the la ws of J apan.
2) User shall not e xport the Softw are to any country to which such
e xpor t would be prohibited b y any applicab le laws.
6. Using the Projector in a Network 
						

							6-3
x Introduction
Thank  you  for  your purchase of the  Dukane porta ble projector 
(here- after re ferred to as unit or projector).
This projector is connected to a personal computer or other equip- 
ment and clearly projects text or graphics to a screen. 
This projector is supplied with convenient software that allows 
presentations to be made more simply and effectively. This guide
gives an overview and describes the use of the accompanying
software (contained in the CD-ROM that is supplied with this pro-
jector). Look over this guide in conjunction with the Help func-
tions of the software programs. 
Contents of the Supplied CD-ROM 
The supplied CD-ROM contains the following software programs:
• Dynamic Image Utility 2.0
•  Vie wer PPT Con ve rter 2.0
• Image Express Utility 1.0
Please see the Help functions of the software programs for infor-
mation about their functions and operation. 
What Can Be Accomplished with the Supplied Software
Dynamic Image Utility 2.0
• Con ve rts P owerP oint files , JPEG images , and other files and cre-
ates slides that can be displa yed with the vie wer function of the
projector .
•  Captures por tions of the image from the screens of w ord processors,
spreadsheets, bro wsers, and other progr ams for use in presenta-
tions .
• By sa ving the created slides on a flash memor y card (*1) and in-
ser ting the card into the PC Card slot of the projector , the slides
can be projected to the screen without connecting a personal com- puter .
• The connection of personal computers and projectors b y means of
a networ k environment (*2) or connection with USB cab le (*3) or
ser ial cab le allows the f ollowing uses . (In a netw ork en vironment
or USB cab le connection (*3) , suppor t of multiple units is per mit-
ted.)
(1) Images and slides can be sent from the personal computer to the
projector and then projected to the screen.  When using Microsoft
Po werP oint 2000/2002, slides can be sent synchroniz ed with the
slide sho w page feed.
(2) A personal computer can be used to s witch the projector power
on/off , control the adjustment of image quality and other settings ,
and to displa y the remaining lamp lif e.
Viewer PPT Converter 2.0• Con ve rts files created with Microsoft P owerP oint 95/97/2000/2002
to an independent inde x format with a simple oper ation to enable
direct pla yback with the vie wer function of the projector .
• When using Microsoft P ow erP oint 2000/2002,  Viewer PPT Con-
ve rter 2.0 can be star ted from Pow erP oint (b y means of add-in
registration to P ow erP oint).
Image Express Utility 1.0• Using a netw ork en vironment (*2), this prog ram enables the screen
image displa yed b y the personal computer to be sent to the projec-
tor and then projected to a screen.
•T wo methods are av ailable for sending the screen image to the
projector . Contin uous Transmit automatically sends the screen
image of the personal computer at a fix ed interval.  Single F rame
Tr ansmit sends the screen image b y clic king the screen b utton (or
pressing a k ey). *1:
Please purchase a commercially a vailab le PCMCIA  Type 2 (A TA
specification) flash memor y card.
*2: Please chec k the networ k environment on the ne xt page.
*3: USB cab le connection is  not suppor ted by the  LT260/L T240/LT220.
Information about Upgrading this Software 
Please see the se rvice page  for projectors (http://
ww w.nec-p j.com/)  for in fo rmation about soft ware up grades of 
Projector User Supportware (i.e., Dynamic Image Utility, Viewer 
PPT Converter, and Image Express Utility). 
Projector Easy Connection Settings 
The Easy Connection option is a mode that can abbreviate the 
troublesome LAN settings when using the Image Express Utility
and connecting the PC and projector via a wireless LAN.
•F rom the Advanced menu, select [Projector Options]  → [LAN Mode]  →
[Status]  → [Advanced]  → [Network Type]  → [Mode]  → [Easy Connec-
tion] on the projector. (No setting for IP address, SSID and channel are 
required.)
• After you have installed the software from the supplied CD-ROM to
your PC, before executing Easy Connection using Image Express Util-
ity, visit our website to update the information about Image Express
Utility and its related software. 
Software can be downloaded from our website at no charge.
• Easy Connection is available on Windows 2000 Professional, Windows 
XP Professional and Windows XP Home Edition (not available on Win-
dows XP Tablet PC Edition [with Image Express Utility 1.0 version
1.01.0003]).
• Easy Connection is available only when both PC and projector use the
NEC optional wireless cards.
• Easy Connection is not available on Dynamic Image Utility included on
the supplied CD-ROM.
6. Using the Projector in a Network 
						

							6-4
c Supported Projectors
Operating Environment
Supported Equipment 
CPU
Memory 
Network Environment 
(when used) 
Supported OS 
Resolution 
Screen Colors IBM PC/AT compatible computers
• CD-ROM drive a requirement (at time of installation)
Pentium MMX processor or higher a requirement 
Pentium III 800 MHz or higher recommended
For Windows XP • 128 MB or more a requirement
• 192 MB or more recommended
For other operating systems • 64 MB or more a requirement
• 128 MB or more recommended
 More memory may be necessary when other applications are run at the same time.
A LAN that supports TCP/IP or a wireless LAN environment is a requirement.
• For information on supported LAN cards, visit:
http://www.nec-pj.com/ (In US: http://www.necvisualsystems.com)
• For wireless LAN connection, use NEC optional wireless LAN card (SWL-2100N-N*).
* Last digit of the model code varies depending on which country you live \
in. For more information,
visit the above Website.
W indows 98
W indows 98 Second Edition
W indows Me
W indows 2000 Professional
W indows XP Home Edition
W indows XP Professional/Windows XP Tablet PC Edition
* Microsoft Internet Explorer 5.01 or higher is required for the aforementioned environments.
* Does not support Windows power-saving function.
1024 dots x 768 lines recommended 
High Color (15 bit, 16 bit) 
T rue Color (24 bit, 32 bit)
6. Using the Projector in a Network 
						

							6-5
v Equipment Connections and Settings
When Using a Network Environment 
What Can Be Accomplished
• Using Image Express Utility 1.0, the screen image displayed by the 
personal computer can be sent to the projector and then projected to a
screen.
• Using Dynamic Image Utility 2.0, a picture or slide can be sent to the
projector and then projected to a screen.
• Using the projector control function of Dynamic Image Utility 2.0 allows
operations to be performed from the personal computer which include
switching the projector power on/off, signal selection, and adjustment
of the picture quality.
Equipment to Be Prepared• Projector (This unit)  • Personal computer (with LAN card) 
• LAN cable (not supplied) or wireless LAN card (optional)
Settings at the Projector Side 
Preparation:
(1) Connect a LAN cable (not supplied) to the LAN port (RJ-45) of the projector. 
(For the use of an optional wireless LAN card, insert the wireless LAN 
card into the PC CARD slot 1 or 2 of the projector.)
(2) Switch on the projector power and project to the screen. (chapter 3) 
(3) Switch to the advanced menu.
1.  Press the MENU b utton.
The menu will be displa yed.
2.  Use the SELECT 
 b utton to align the cursor with [Projector Options],
then press the ENTER b utton.
The sub men u will be displa yed.
3.  Use the SELECT 
 b utton to align the cursor with [LAN Mode], then
press the ENTER b utton.
The LAN mode setting screen will be displa yed.
4.  Set the v arious items .
See Setting LAN Mode on page 8-19  for inf ormation about the v ari-
ous items .
NOTE: When switching the power of the projector on/off with the projecto\
r control
function, please set [Projector Options] →  [Setup] → [Page 4] → [Idle Mode] toOn.
Settings at the Personal Computer Side 
P erform the regular LAN connections settings according to the
instruction manual of the LAN card (adapter).
There are no special settings to be made in the connections with
the projector. 
When Making Connections with Serial Cable or USB 
Cable(*)
*   USB ca ble connection is not suppo rted . 
What Can Be Accomplished • Using Dynamic Image Utility 2.0, a picture or slide can be sent to the
projector and then projected to a screen.
 • Using the projector control function of Dynamic Image Utility 2.0 allows operations to be performed from the personal computer which include 
switching the projector power on/off, signal selection, and adjustment
of the picture quality.
[For Connections with USB Cable] 
Equipment to Be Prepared
• Projector (This unit) 
•P ersonal computer
• USB cable (included with the projector)
Connection at the Projector Side 
Plug the B type connector of the USB cable to the USB port [PC]
(type B).
NOTE: When switching the power of the projector on/off with the projecto\
r control
function, please set [Projector Options] →  [Setup] → [Page 4] → [Idle Mode] to“On”.
Connection at the Personal Computer Side 
Plug the A type connector of the USB cable to the USB port [PC]
(type A). 
[For Connections with Serial Cable]
Equipment to Be Prepared
• Projector (This unit) 
•P ersonal computer
•   Se rial ca ble , 
A  commercially  availa ble RS-232C cross ca ble  for  9060
Connection at the Projector Side 
Plug the serial cable into the PC CONTROL connector. (“Termi-
nal Panel Features” and “PC Control Connector” on pages 1-9
and 10-10) 
Connection at the Personal Computer Side 
Plug the serial cable into the (RS-232C) serial connector.
6. Using the Projector in a Network 
						

							6-6
b Software Installation
NOTE
•Windows 98 operations will be described in examples given here.
•When using Windows 2000, please perform software installation/uninstalling with
Administrators authority. When using Windows XP, perform with Computer
Administrator authority.
Installation
Dynamic Image Utility 2.0, Viewer PPT Converter 2.0, and Im-
age Express Utility 1.0 will all be installed together. The various
programs cannot be installed individually.
Preparation:
Start Windows.
If Windows has already been started, please exit all running ap-
plication software. The installation may not be completed prop-
erly unless all software has been exited.
1. Place the supplied CD-ROM in the CD-ROM drive.
The Welcome screen will appear.
Reference
Should the Welcome screen not appear...
1) Click [Start].
2) Click [Run (R)]. The [Run] screen will appear.
3) Enter the CD-ROM drive name (e.g., Q: \) and then SETUP.EXE
to [Open (O)].
4) Click [OK]. The Welcome screen will appear.
2. Click [Next >] at the Welcome screen.
The End User License Agreement screen will appear.
•Please carefully read the contents of the End User License Agree-
ment.
3. If you agree, click [Yes].
•If you do not agree, please click [No] and exit the installer.
4. Now, follow the operations described in the screen messages.
•Please remove the CD-ROM from the CD-ROM drive when the
installation is completed.
Reference
•To cancel the installation of the supplied software part way through
the installation, click [Cancel] and follow the instructions of the dia-
log box.
Uninstalling
Dynamic Image Utility 2.0, Viewer PPT Converter 2.0, and Im-
age Express Utility 1.0 will all be uninstalled together. The vari-
ous programs cannot be uninstalled individually.
1. Click [Start].
2. Click [Settings] R [Control Panel].
The Control Panel screen will be displayed.
3. Double click [Add/Remove Programs].
The Add/Remove Programs Properties screen will appear.
4. Click NEC Projector User Supportware from the list.
5. Click [Add/Remove. . . ].
The Confirm File Deletion screen will appear.
6. Check the message and click [Yes].7. Now, follow the operations described in the screen messages.
When the uninstall procedure is completed, there will be a return to the
Add/Remove Programs Properties screen.
8. Click [OK].
There will be a return to the Control Panel screen
6. Using the Projector in a Network 
						

							6-7
n Starting/Exiting the Software
Dynamic Image Utility 2.0
Start the Software
Preparation:
Install the software on the personal computer from the supplied
CD-ROM. (Page 6-6)
The software cannot be started from the supplied CD-ROM.
From the [Start] menu click [Program] → [NEC Projector User
Supportware] → [Dynamic Image Utility 2.0].
Dynamic Image Utility 2.0 will start.
Reference
•By selecting a PowerPoint file with Dynamic Image Utility 2.0 and click-
ing [Tools] → [Converting PowerPoint file], the function equivalent to
Viewer PPT Converter 2.0 can be executed.
•Image Express Utility 1.0 can be started by clicking [Tools] → [Image
Express Utility 1.0 Start] of Dynamic Image Utility 2.0.
Display Help
Preparation:
Please start Dynamic Image Utility 2.0.
1. Click [Help].
The [Help] menu will appear.
2. Click [Help].
The [Help] screen will appear.
Exit the Software1. Click [File].
The [File] menu will appear.
2. Click [Exit].
Dynamic Image Utility 2.0 will close.
Viewer PPT Converter 2.0
Start the Software
Preparation:
(1) Check that Microsoft PowerPoint has been installed. Viewer PPT Con-
verter 2.0 cannot be used unless PowerPoint has been installed.
(2) Install the software on the personal computer from the supplied CD-
ROM. (Page 6-6)
The software cannot be started from the supplied CD-ROM.
1.From the [Start] menu click [Program] → [NEC Projector User
Supportware] → [Viewer PPT Converter 2.0].
Dynamic Image Utility 2.0 will start.
Reference
•A function equivalent to Viewer PPT Converter 2.0 can also be
executed from the Dynamic Image Utility 2.0 [Tools] 
→ [Converting
PowerPoint file] menu.
•Viewer PPT Converter 2.0 can also be started from the Microsoft
PowerPoint 2000/2002 [Tools] 
→ [NEC Projector User Supportware]→ [Output Viewer] menu.
Display Help
Preparation:
Please start Viewer PPT Converter 2.0.
1. Click [Help].
The [Help] menu will appear.
Exit the Software1. Click [Exit].
Viewer PPT Converter 2.0 will close.
Image Express Utility 1.0
Start the Software
Preparation:
Install the software on the personal computer from the supplied
CD-ROM. (Page 6-6)
The software cannot be started from the supplied CD-ROM.
1.From the [Start] menu click [Program] → [NEC Projector User
Supportware] → [Image Express Utility 1.0].
Image Express Utility 1.0 will start.
Reference
•Image Express Utility 1.0 can also be started from the [Tools] R
[Image Express Utility 1.0 Start] menu of Dynamic Image Utility
2.0.
Display Help
Preparation:
Please start Image Express Utility 1.0.
1. Click the [] or [] icon of the Windows screen task tray.
The main menu of Image Express Utility 1.0 will appear.
2. Click [Help] .
The Help screen will appear.
Exit the Software
1. Click the [] or [] icon of the Windows screen task tray.
The main menu of Image Express Utility 1.0 will appear.
2. Click [Exit].
Image Express Utility 1.0 will close.
6. Using the Projector in a Network 
						

							6-8
m Troubleshooting
In this section, the software names have been abbreviated as follows:
Dynamic Image Utility 2.0 to DIU 2.0, Viewer PPT Converter 2.0 to PPTC 2.0, and Image Express Utility 1.0 to IEU 1.0.
 Installation does not complete normally.
Check PointsCountermeasures
When using Windows 2000, did you log on with Administra-
tors authority? When using Windows XP, did you log on with
Computer Administrator authority?When using Windows 2000 or Windows XP, log on with the
authority described at the left and then install.
Has Microsoft PowerPoint 2000/2002 been installed on the
personal computer to which this projector software is being
installed?
When this projector software is installed on a personal
computer that does not have PowerPoint 2000/2002 installed,
a message to the effect of Error in the automatic registration of
PPTViewer2.dll will appear part way through the installation.When the message described at the left appears part way
through the installation, add-in registration will not be made to
PowerPoint; however, the installation of this projector software
will be completed normally.
To have add-in registration made to PowerPoint, please install
this projector software to a personal computer on which
PowerPoint 2000/2002 has been installed.
 Viewer PPT Converter 2.0 does not function. (PPTC 2.0)
Check PointsCountermeasures
Has Microsoft PowerPoint been installed on the personal
computer?Install PowerPoint on the personal computer. Or, install Viewer
PPT Converter 2.0 on a personal computer on which
PowerPoint has been installed.
 When using the projector control function, the projector power does not switch on. (DIU 2.0)
Check PointsCountermeasures
Are the personal computer and the projector connected by a
serial cable?
Or, are the personal computer and the projector connected by
a LAN?Connect the personal computer and the projector with an serial
cable or USB cable.
Or, check the LAN port (RJ-45) of the projector. Purchase the
optional wireless LAN card for wireless LAN connection.
When the personal computer and the projector are connected
with a LAN, is the projector in the idle mode?In the [Projector Options]
[Setup] menu of the projector, place
checkmark in “Idle Mode”. Connect a power cable to the
power outlet and set the main power switch to I (On).
 You want to delete the PowerPoint add-in registration. (PPTC 2.0)
Check PointsCountermeasures
Installing this projector software when Microsoft PowerPoint
2000/2002 has already been installed on the personal
computer, will result in the automatic registration of the add-in
to PowerPoint.Please see the PowerPoint Help function for the method of
deleting PowerPoint add-in registrations.
The PowerPoint add-in registration will not be deleted even
when this projector software is uninstalled.
6. Using the Projector in a Network