Dukane Imagepro 9017 D-ila Multimedia Projector Users Manual

							31
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
Image of 4:3
Setting the 
screen size to [4:3]
Setting the 
screen size to [16:9]Image of 16:9
SCREEN
W
S
SCREEN
W
S
16 : 9 4 : 3
Note
(Original image) (Aspect ratio)
Image of 4:3Image of 16:9
(Original image) (Aspect ratio)
●Screen size can also be adjusted from the “Options menu”. (☞ page 39)
12
WS
Screen Pos.
●Selecting       or       will change the projected image as shown in 
the following tables.
Basic Operations
  Using the Quick Alignment function
The quick alignment function automatically adjusts (sets) the screen set-
tings of the image input from the PC 1 or PC 2 input terminal.
●This can only be performed with the remote control.
Press the QUICK ALIGN. (Quick Alignment ) button.
During automatic alignment, “Quick Alignment” appears on the screen,
and disappears after alignment is complete.
Notes
•The “Quick Alignment” function only works when computer
signals are input into either the PC1 or PC2 input terminal.
It does not work when signals are input via a VIDEO IN terminal
(The VIDEO or Y/C input terminal).
•The Quick Alignment function.
  This automatically adjusts  “Horiz. disp. pos.” , “Vert. disp. pos.”,
“Phase”, “Tracking”, etc.
•Using the Quick Alignment function for automatic adjustments.
Please use with bright still-pictures. This function may not work
correctly on a dark picture or a motion-video.
If adjustment with the Quick Alignment function is not satisfactory,
adjust “Horiz. disp. pos.” and “Vert. disp. pos.”, “Phase” and “Track-
ing” individually.
  Selecting the Screen Size
Press the SCREEN button to select the wide screen size (16:9) or the
standard screen size (4:3).

 Screen size display
Displays when „ is selected. Move the image
position with the cursor button  or .
1Adjusted value
range:  -30 ~ 0 ~30
2Level displayed
level displayed is based on the adjustment value.•When the screen mode is set to 16:9, UXGA signals cannot be pro-
jected.
1
212
Screen Pos. 
						

							32
Adjustments and Settings Using Menus
The menus displayed on the screen are used to setup the projector and perform adjustments.
The Menu Structure
The menus of the projector have the following structure.
 Video Input selection
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from among 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Image adj.” menu
3 Main: “Set up” menu
6 Main: “Logo” menu
w Main: “Language” menu
e Main: “Information” menu
9 Main: “Options” menu (“Page 1”)p “Color profile” menu
q Main: “Options” menu (“Page 2”)
4 “Position” menu
2 “Color temp.” menu
5 “Decoder” menu
7 “Capture menu”8 “Capture start”
Main menu Submenu
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Decoder
SECAMPA L NTSC4.43NTSC AUTO(NTSC)
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTER
BlueBlack
OFFONImage adj.
Set up
Logo
Options
Language
Information
AENTER
(-) (+)12(-) (+)12
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
12
15sec ON
OFF ON
OFF ON
4:3 16:95sec OFF
ENTER
ENTER
sRGB
MacRGB
Color profile
Adobe
EBU
EXIT
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
NTSCSource 
1234 hLamp time
CH.0SwitcherVIDEOInput 
Image adj.
Set up
Logo
Options
Language
Information
A
0 GREEN
0 BLUE0 REDGBR
Color temp.6500STD User
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
OFF ON
OFFON
OFF ON
9600RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200
12801400ENTER
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
Page 1     601530OFF
Color profile     
Menu display     
Line display     
Flip H     
Flip V     
Screen     
Screen pos.     
Page 2      Contrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Logo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menu
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
Deutsch
Espãnol
Italiano
Français
Portugûes
A
Image adj.
Set up
Logo
Options
Language
Information
ENTERENTER
ENTERENTER
Auto OFF
1080i 1035i sF
4:3
1216:9Position     
Deinterlace     
HDTV     
Aspect ratio     
Decoder     
Phase     
12
12
1 Position     
Menu pos.
Horiz.disp.pos.     
Vert.disp.pos.
Horiz.DIST.pos.
English 
						

							33
Adjustments and Settings Using Menus
 When PC input is selected
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from among 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
A
GBR
EXIT
12
12
1
A
GBR
ENTER
1:1PanelAspect
LowStd HighSTBP 12 123
A1234 hCH.0
1280 X 1024
63.98kHz
60.02 HzPC1
GBR
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
InformationImage adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
Information
A
GREEN
BLUE REDGBR
Color temp.6500STD UserContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Position     
Tracking     
Phase     
Resize     
Clamp     
Sync level
Position
     
Menu pos.     
Horiz.disp.pos.     Vert.disp.pos.     
Horiz.DIST pos.     
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTER
BlueBlack
OFFONLogo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menuImage adj.
Set up
Logo
Options
Language
Information
AENTER
(-) (+)12(-) (+)12
GBR
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     
Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
12
15secON
OFF ON
OFF ON
4:3 16:95sec OFF
ENTER
ENTERColor profile     
Menu display     
Line display     
Flip H     
Flip V     
Screen     
Screen pos.     
Page 2     
sRGB
MacRGB
Color profile
Adobe
EBU
EXIT
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
InformationInput     
Switcher     
Resolution
Frequency H
Frequency V
Lamp time     
Deutsch
Espãnol
Italiano
Français
Portugûes
A
Image adj.
Set up
Logo
Options
Language
Information
OFF ON
OFFON
OFF ON
9600RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200
12801400ENTER
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
Page 1     601530OFF
English
0
0 0
1 Main: “Image adj.” menu
3 Main: “Set up” menu
6 Main: “Logo” menu
w Main: “Language” menu
e Main: “Information” menu
9 Main: “Options” menu (“Page 1”)p “Color profile” menu
q Main: “Options” menu (“Page 2”)
4 “Position” menu
2 “Color temp.” menu
7 “Capture menu”8 “Capture start”
Main menu Submenu 
						

							34
Adjustments and Settings Using Menus
 When no image signal is inputted
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from among 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
A
GBR
ENTERENTER
1:1PanelAspect
LowStd HighSTBP 12 123
Image adj.
Set up
Logo
Options
Language
InformationPosition     
Tracking     
Phase     
Resize     
Clamp     
Sync level
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
15secON
OFF ON
OFF ON
4:3 16:95sec OFF
ENTERENTER
ENTERENTERColor profile     
Menu display     
Line display     
Flip H     
Flip V     
Screen     
Screen pos. 12       
Page 2     
A1234 hCH.0PC1
GBR
Image adj.
Set up
Logo
Options
Language
InformationInput     
Switcher     
     
Lamp time     
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTERENTERENTER
BlueBlack
OFFONLogo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menuImage adj.
Set up
Logo
Options
Language
Information
AENTERENTER
(-) (+)12(-) (+)12
GBR
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     
Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
OFF ON
OFFON
OFF ON
9600RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200
12801400
601530OFF
Deutsch
Espãnol
Italiano
Français
Portugûes
A
Image adj.
Set up
Logo
Options
Language
InformationEnglish
ENTERENTER
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
Page 1     
3 Main: “Set up” menu
     
9 Main: “Options” menu (”Page 1”)
w Main: “Language” menu
e Main: “Information” menu
qMain: “Options” menu (“Page 2”)
Main menuSubmenu
6 Main: “Logo” menu7 “Capture menu”8 “Capture start”
Displayed only when PC is selected. 
						

							35
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
PRESET
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.
EXIT
ENTER
HIDE
VIDEO
TEMPSTAND BYOPERATE
Menu 
operation 
button
Menu 
operation 
button
MENUMENU
ENTER
EXIT
ENTER
ENTER
Main unit
ENTER
Remote control unit
Adjustments and Settings Using Menus
The Menu Operation Buttons
The menus are accessed and operated using the following buttons on
the projector/remote control:
Button
Main unit
Remote control unit
Function
EXIT
Displays the main menu on the
screen.
•When the main menu is displayed,
press to exit the menu mode.
Select an item while the main menu
(hierachy1)is displayed; the submenu
(hierachy 2) corresponding to the
item selected will be displayed on the
screen.
Press to shift to the “Set up” screen
(hierachy3) of the selected item
against which “ENTER” is displayed.
Press to return to the previous menu.
•  While the main menu is displayed,
   press to exit the menu mode.
While the main menu and sub-
menus (“Image adj.”, “Set up”,
“Options”, “Logo”)  are  displayed

/:Selects an adjustment item
in the menu.
/:Sets the value of the item
selected.
The adjusted set value is
immediately reflected on
the image.
While the “Language”, “Decoder”
or “Color profile” submenus are
displayed

/: Selects an item in the menu./: No effect. 
						

							36
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.MENU
EXIT
ENTER
VIDEO
TEMPSTAND BYOPERATE
2, 4 3, 5 6 1
5
1
6
2, 4 3, 5
5
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
A
12
12
1 12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     12
A
12
12
1 12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     12
The Procedure for Menu Operation
1.Press the MENU button.
The main menu is displayed on the screen.
4.Press the CURSOR buttons (
/) to select an adjust-
ment item.
Item names in submenus displayed in pale cannot be selected.
5.Press the CURSOR buttons (/) to change the setting
value.
6.To EXIT after the adjustment, press the EXIT button.
Each time you press the button, the menu returns to the previous
one.
7.Repeat procedures 2 to 6 to set other items.
After all adjustments are done,
Press the MENU button.
The menu will disappear from the screen.
The menu item that has been se-
lected is displayed.
The icon of the selected menu item
will be highlighted.
The submenu is displayed.
2.Press the CURSOR buttons (
/) to select a submenu.
•The “Image adj.”, “Set up”, “Logo”, “Options” and “Language”
submenus are displayed.
•When “Information” is chosen, the image input or PC input infor-
mation (whichever is currently selected) is displayed on the right
of the menu.
•When “Language” is selected, you can set the language. ➔
Proceed to Procedure 6.
3.Press ENTER button or the right CURSOR button ().
•The submenu is displayed on the screen.
•The submenu indicated differs according to whether Video input
or PC input is selected, or when there is no image signal inputted.
For details, please see ‘The Menu Configuration’ on the next page.
E.g. Main menu when video input is
       selected: “Image adj.”.
Alternatively, press ENTER.
•When the item in the image adjustment menu against which
“ENTER” is indicated is selected, either it will shift to the set
up screen or the item command will be executed.
E.g.“Image adj.” menu when video
input is selected.E.g.“Image adj.” menu when PC in-
put is selected.
Adjustments and Settings Using Menus 
						

							37
Adjustment and Setting Using Menus
3“Set up” menu
Use this menu to set the basic Tracking and Positioning settings
of a picture image. Items that can be adjusted via the “Set up”
menu are shown below.
•Adjustment items differ depending on whether Video input or
PC input is selected.
When Video input is selected
Adjustment item (press
/)Adjustment content (press/)
“Position” The position of the image and the menu
can be adjusted.
[ Press the ENTER button to enter the
     “Position” menu 4.
“Deinterlace” This is set when viewing movies.
“Auto” : Normally, the projector is set to
Auto.
“OFF” :This is set when not viewing
movies.
“HDTV” In order to display “HDTV” signals in the
exact aspect ratio of 16:9, the correct nu-
merical value has to be set.
“1080i” : Normally, set to 1080i.
“1035i” : Set when high vision signals are
used.
“sF” : Used for segment frame signals.
“Aspect ratio” Select the vertical-to-horizontal ratio of
the image projected.
Set it to 4:3 for normal television image
input and 16:9 for Hi-Vision input.
When the “Screen” mode is set to 16:9,
UXGA signals cannot be projected.
Values: 4:3, 16:9 [4:3]
“Decoder” Sets the “Decoder”.
[ Press the ENTER button to enter the
      “Decoder” menu 5.
“Phase” Adjusts flickering or dim images.
(setting is normally not required.)
Range of values : 0 ~ 31
[Varies with signals]
When PC input is selected
Adjustment item (press
/)Adjustment content (press/)
“Position”Adjusts the position of the image and
menu display.
[ Press ENTER to go to the “Position”
      menu 4.
“Tracking” Adjusts lateral size and display area of
image. (Setting is normally not required.)
[Varies with signal]
“Phase” Adjusts flickering or dim image.
(adjustment is normally not required.)
Range of values : 0 ~ 40
[Varies with signals]
“Resize”When the image resolution is smaller than
that of the projector’s D-ILA element, the
projected image will be enlarged to almost
the full screen size.
Range of values : *“1:1”, “Panel”, “Aspect”
[“Aspect”]
1“Image adj.” menu
Image adjustment.
You can adjust the following items on the “image adj.” menu.
•The items displayed differ depending on whether Video input
or PC input is selected.
•There is no display when no image signal is inputted.
Adjustment item (press
/)Adjustment content (press/)
“Contrast” Adjusts the contrast of the picture image.Range of values: -30~30 [0]
“Brightness” Adjusts the brightness of the picture im-
age. Range of values: -30~30 [0]
“Color” Adjusts the color density of the picture
image. Range of values: -30~30 [0]
“Tint”Adjusts the tint of the picture image.
Range of values: -30~30 [0]
“Sharpness”* Adjusts the outline of the picture image.
Range of values: -3~3 [0]
“Color temp.”Adjust the Color temperature of the
screen.
[ Press ENTER button to go into the
      Color temperature setting menu.
“Reset”Resets all items in the “Image adj.”
submenu to the pre-set values( ie values
set upon purchase).
[ Press ENTER button to reset.
*In the “Set up” menu 3, if the “Resize” function in the PC submenu is
set to “1:1”, the image quality will not change even if the value is
changed. (No adjustment)
2 “Color temp.” menu
To adjust the “Color temp.” of the projected image, press the
(
/) CURSOR buttons and choose the setting. Next press
the (/) CURSOR buttons to set the “Color temp.”. If “6500”
is set, the image will turn out reddish.
Set value: “6500”, “Normal”, “User” [“User”]
“RED” : –255 ~ 0 [0]
“GREEN” : –255 ~ 0 [0]
“BLUE” : –255 ~ 0 [0]
The Menu Configuration
Item values shown in [  ] are initial values set at manufacture.
•Press ENTER, EXIT or the right CURSOR button () to op-
erate a MENU while it is displayed.
•The submenu corresponding to an item currently selected is
displayed on the right-hand side of the main menu.
•Menu items shown differ according to whether Video input or
PC input is selected or when there is no image signal input-
ted.
•When “Information” is selected, information relating to the
present selected image input appears on the right side of the
menu.
There is no submenu for this “Information” menu. (For details,
please See ‘Main: “Information” menu’ on page 40.)
When Video input is selectedWhen PC input is selected 
						

							38
“Clamp” This can be used if the screen of the PC/
workstation is unstable in that it dims and
brightens.
Set the position of the clamp pulse to
Back porch (“BP”) or Sync tip (“ST”).
Normally, “BP” is used.
Values: “ST”, “BP” [“BP”]
“Sync Level” Although the inputted image signal is
adjusted so that synchronization occurs
automatically, this changes by changing
the “Sync level” setting.
Setting can be made by selecting “Low”
(weaker), “Std” (factory set) or “High”
(stronger).
Values: “Low”, “Std”, “High” [“Std”]
* “1.1” : The image is displayed at the inputted resolution.
“Panel
”: The picture image projected is virtually enlarged to
  the full screen size if the inputted resolution is smaller
                         than (1400 pixels x 1050 pixels).
“Aspect
”: While maintaining the original aspect ratio, the video
  image projected is virtually enlarged until either the
  horizontal or vertical side reaches the full size (1400
  pixels x 1050 pixels).
When there is no image signal inputted
Adjustment item (press
/)Adjustment content (press/)
“Sync level” Although the inputted image signal is
adjusted so that synchronization occurs
automatically, this changes by changing
this setup.
Setting can be made by selecting “Low”
(weaker), “Std” (factory set) or “High”
(stronger).
Values: “Low”, “Std”, “High” [“Std”]
4 “Position” menu
Adjusts the menu display position. Press the (
/) CURSORS
to set the horizontal/vertical position of the menu display.
Set Value:
“Menu pos.”:
“Horiz. disp. pos.” : Varies with signals.
“Vert. disp. pos.” : Varies with signals.
“Horiz. DIST pos.” : - 8 ~ + 7 [0]
5 “Decoder” menu
Press the (
/) CURSOR buttons to choose the “Decoder” of
the image signals. Normally, “Auto” is selected. When “Auto” does
not function well, select the appropriate decoder accordingly.
 Values: “AUTO”, “NTSC”, “NTSC4.43”, “PAL”, “SECAM”
 [“AUTO”]
6 “Logo” menu
Adjustment item (press
/)Adjustment content (press/)
“Logo  disp.” Sets whether to indicate the user set logo
(captured image: “Logo disp.”) when the
projector starts up.
[“ON”]
“Logo pos.”Sets the position of the user set logo (cap-
tured image: “Logo disp.”) when the pro-
jector starts-up. Re-setting can be per-
formed only when the logo has been
eliminated.
Set value:
“Logo pos.”:
¥¥¥ ¥ ¥ ¥ ¥ ¥
“Back color” Selects the background color of the user
set picture (captured image: “Logo disp.”).
[“Black”]
Re- setting can be performed only when
the logo has been eliminated.
“Logo delete”Deletes the user set logo (captured
image: “Logo disp.”). Deletion takes a few
seconds.
[ Press the ENTER button to delete.
“Capture menu” You can project a picture from the video
player or PC and capture it to use as your
logo.
The captured picture can be displayed as
a logo display when the projector starts
up.
[ Press the ENTER button to go into
      the “Capture menu” screen.
7 “Capture menu”
Adjustment item (press
/)Adjustment content (press/)
“Menu pos.” Adjusts the display position of the cap-
ture menu.
Set value:
“Menu pos.”:
¥¥¥ ¥ ¥ ¥ ¥ ¥
“Horiz. move” The position of the picture that you want
to capture can be moved left/right with the
CURSOR buttons ( / ).
“Vert. move” The position of the picture that you want
to capture can be moved up/down with
the CURSOR buttons (
 /).
“Horiz. size” The width of the picture that you want to
capture can be set by the CURSOR but-
tons ( / ).
“Vert. size” The height of the picture that you want to
capture can be set by the CURSOR but-
tons  (
 /).
“Capture start” After setting all the items of the capture
menu, image capture starts.
❈Note that images already inputted will
 be deleted.
[ Press the ENTER button to start.
Adjustments and Settings Using Menus
[  ]
[  ]
[  ]
¥¥¥ ¥ ¥ ¥ ¥ ¥ 
						

							39
8 “Capture start”
The status of capture is displayed in bold.
“Capt. in prog. (Approx. 2min)”
The image is being read into the projec-
tor. During this time interval, the projec-
tor will not respond to any command sig-
nal inputted by the user.
“Signal can not be captured”
Clear the message with the EXIT button
and input appropriate signals.
“Reduce capt. size”
Clear the message with the EXIT button
and decrease the signal size.
❈Depending on the image content, there
will be cases where certain signals can-
not be captured while others of the
same size can be.
9 “Options” menu (q)
The items of the “Options” menu shown below can be adjusted.
•The “Options” menu consists of two pages (“Page 1” and “Page
2”).
“Page 1”
Adjustment item (press
/)Adjustment content (press/)
“Color profile” Sets the color table.
[ Press the ENTER button to go into the
       color profile menu p.
“Menu  display” Sets whether the menu display automati-
cally clears after 15 seconds.
Values: “15sec”, “ON” [“15sec”]
“Line  display” Sets whether the line display is shown for
about 5 seconds.
Values: “5sec”, “OFF” [“5sec”]
“Flip H” Reverses image left to right.
Values: “ON”, “OFF” [“OFF”]
“Flip V” Inverses image upside down.
Values: “ON”, “OFF” [“OFF”]
“Screen” Sets the projected screen size.
Values: 4:3, 16:9 [4:3]
“Screen pos.”Sets the display position when the
“Screen” is set to [16:9].
Values: -30~30 [0]
“Page 2” Displays “Page 2” of the “Option” menu.
[ press ENTER to go the “Option” menu
     (“Page 2”) screen q.
p “Color profile” menu
To choose the color table of the image signals, press the (
 / )
CURSOR buttons. When using “Color profile”, set the “Color
temp.” to “6500”.
•No display in the absence of image signal input.
Values: “------”, “sRGB”, “MacRGB”, “Adobe”, “EBU”
[“------”]
Adjustments and Settings Using Menus
q “Page 2”
Adjustment item (press
/)Adjustment content (press/)
“Sleep time [min]” Sets the length of sleep time which, when
lapsed, automatically puts the projector
into stand-by state if no signal is input-
ted.
Setting value: 15,30,60,“OFF” [“OFF”]
“Menu color”When “ON”, menu becomes transparent and
the background can be seen through it.
Setting value: “OFF”, “ON” [“OFF”]
“PC2 (BNC)” Sets whether to use the BNC connector
on the back of the projector as an “RGB”
signal input terminal or as a “YP
BPR”
(color-difference) signal input terminal.
Please reset it based on the connected
apparatus.
❈ The input will be “RGB” irrespective of
    the PC signal setting.
Setting value: “RGB”, “YPBPR”[“RGB”]
“DIST”Image of high resolution can be achieved.
Set as required.
This is turned “ON” when the OPERATE
button is pressed.
Setting value: “OFF”, “ON” [“ON”]
“SCART” Connects to a Europe-adapted SCART
plug and turns it “ON” during component
input.
Connect the Image Signal cable to the
RGB terminal of the PC2 input terminal
and the Sync Signal cable to the VIDEO
IN terminal.
Setting value: “OFF”, “ON” [“OFF”]
“RS-232C [bps]”Sets the communication speed (signal
transmission speed) when communicat-
ing with a computer by using the RS-232C
terminal. Please set the baud rate for
transmission.
Setting value: 9600,19200 [19200]
“SXGA” Setting value: 1280,1400 [1280]
“Page 1” Display “Page 1” of “Options” menu.
[ Press the ENTER button to go to “Op-
      tions”  menu (“Page 1”) screen9.
w “Language” menu
Select the language in this language menu with the CURSOR
buttons (
 / ).
Setting value : “
” (Japanese), “English”, “Deutsch” (Ger-
man), “Espanol” (Spanish), “Italiano” (Italian),
“Francais” (French), “Portugues” (Portuguese)
and “
” (Korean).
[“English”]
❈Some words in the menu and proper nouns such as “VIDEO”,
“NTSC”, “Quick Alignment” are shown only in English. 
						

							40
e “Information” menu
When video input is selected
Adjustment item (press
/)Adjustment content (press/)
“Input” Displays the image input (VIDEO, Y/C,PC2) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
0      : not being used.
1-10 : switcher number.
❈ For details, please check with your au
    thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time”Displays the number of accumulated used
hours of the light-source lamp.
When PC input is selected
Adjustment item (press
/)Adjustment content (press/)
“Input” Displays the computer input (PC1, PC2,
PC3) when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
0      : not being used.
1-10 : switcher number.
❈ For details, please check with your au
    thorized dealer.
“Resolution”Displays the resolution of the inputted sig-
nal. (Horizontal x vertical)
❈ Some inputted signals cannot be dis
  played correctly.
“Frequency H” Displays the horizontal frequency of the
inputted signal.
“Frequency V” Displays the vertical frequency of the in-
putted signal.
“Lamp time”Displays the number of accumulated used
hours of the current light-source lamp.
When no image signal is inputted
Adjustment item (press
/)Adjustment content (press/)
“Input” Displays the current selected image in-
put (VIDEO, Y/C, PC1, PC2, PC3) when
projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
0: not being used
1-10 : switcher number.
❈ For details, please check with your au
    thorized dealer.
“Lamp time”Displays the number of accumulated used
hours of the light-source lamp.
Adjustments and Settings Using Menus