Dukane Imagepro 9017 D-ila Multimedia Projector Users Manual

Users Manual
D-ILA Multimedia Pr ojector
Model 28A9017
Audio  Visual Pr oducts 

2
SAFETY PRECAUTIONS
About burning-in of the D-ILA device
Do not allow the same still picture to be projected for a long
time or an abnormally bright video picture to be projected.
Do not project video images with high-intensity or high contrast
on a screen. The video image could be burnt into the D-ILA
device.
Use special care when projecting video games or computer pro-
gram images. There is no problem with ordinary video-cassette
playback images.
About the installation place
Do not install the...

3
–Slots and openings in the cabinet are provided for ventilation.
These ensure reliable operation of the product and protect it
from overheating. These openings must not be blocked or
covered. (The openings should never be blocked by placing
the product on bed, sofa,rug, or similar surface. It should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided and the manufacturer’s
instructions have been adhered to.)
For proper ventilation, separate the...

4
Safety Precaution
The wire which is coloured green-and-yellow must be connected
to the terminal which is marked with the letter E or the safety
earth or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the ter-
minal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
When replacing the fuse, be sure to use only a correctly rated
approved type,...

5
Caution
About burning-in of the D-ILA device
●Do not allow the same still picture to be projected for a long
time or an abnormally bright video image to be projected.
Do not project video images with high-intensity or high con-
trast on a screen. The video image could be burnt into the
D-ILA device.
Use special care when projecting video games or computer
program images.
There is no problem with ordinary video cassette playback
images.
Viewing conditions
●Brightness of the room
Please avoid having...

6
Contents
SAFETY PRECAUTIONS ............................................ 2 
Caution ........................................................................\
 5 
Accessories ................................................................ 6 
Controls and Features ............................................... 7
Front Side / Top Surface / Left Side ....................................... 7 
Rear Side / Right Side / Bottom Surface ................................ 8
Connector Panel...

7
2AC Power Input 
 Terminal
3Carrying Handle
1Control Panel
8Remote Sensor (Front)
pZoom Ring
9Focus Ring
7Exhaust Vents 
4Foot Lever
 (for front adjustable foot)
6Lens Cap
5Lens
4Foot Lever
 (for front adjustable foot)
Using the Carrying Handle
Controls and Features
Front Side/ Top Surface/ Left Side
7Air inlets (on the front, right, and bottom side of 
projector)
The air inlets absorb air to cool the internal components of 
the projector. Do not block or allow warm air to blow into 
them as it may...

8
qConnector Panel
uFilter
7Air Inlet
wSpeaker
eLamp Cover
tRemote Sensor (Rear)
rExhaust Vents
yFront Adjustable 
Foot
iRear Fixed 
Foot
Blocked as it is not in use. 
Opening it forcibly will cause 
damage to the machine.
Bottom Surface
7Air Inlet
Rear Side/ Right Side/ Bottom Surface
Controls and Features
qConnector Panel
For details, refer to ‘Connector Panel’ . (☞ page 9)
wSpeaker
Built-in speaker located here.
eLamp Cover
Remove this cover when replacing the lamp. (☞ page 43)
rExhaust Vents
Warm air...

9
Controls and Features
Connector Panel
2PC1 Input Terminal
4DC OUT
Terminal6REMOTE
Terminal
5AUDIO Input Terminal7CONTROL RS232C
IN/OUT Terminal9VIDEO Input
Terminal
1PC2 Input Terminal3PC3 Input Terminal
8Y/C Input
Terminal
RPR/CRGYBPB/CSVDVIH/CS
PC1PC3PC2
AUDIO INREMOTEDC OUT
5V }1.5ARS-232C OUT RS-232C IN Y/C VIDEOCONTROLVIDEO IN
1PC 2 Input terminal [BNC x 5]
These are multipurpose video input terminals that allow in-
put of the following signals: analog RGB signals, vertical
sync (V) signals, and...

10
8TEMP indicator1STAND BY indicator
2OPERATE indicator
3OPERATE button
4VOLUME button
5EXIT button
6ENTER button
7HIDE button
pVIDEO button
qPC button
wH-KEYSTONE button
eV-KEYSTONE button
rMENU button
tCURSOR button
(
 / 
 / 
 / )
9LAMP indicator
yPRESET button
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.
VIDEO
TEMPSTAND BYOPERATE
PRESET
MENUEXIT
ENTER
HIDE
Control Panel on the Projector
Controls and Features
Indicator Display on the Control Panel
Stand-by, operate and cool down modes, together with other...