Dukane Imagepro 9017 D-ila Multimedia Projector Users Manual

51 
 About warning indicators
If something abnormal has occurred in the projector, the warning mode sets in and the type of abnormality will be indicated by a
combination of indicators displayed on the control panel as shown in the following table.
The projector will then automatically stop projection and run the cooling fan for about 90 seconds.
Warning Indication

 Action to be taken upon warning indications
Please follow the procedures below.
For No.1-3
No.1 : Unplug from the main power outlet and...

52

 Model name/A rticle name  28A9017  D-ILA multimedia projector

  Emission method D-ILA®* (Reflective Active Matrix Principle)

 Display panel/ size D-ILA /0.7 (1400pixels x 1050pixels) x 3 (Total number of pixels: 4,410,000)

  Projecting lens   x 1.3 zoom lens (2.1:  ~2.6:1)  
  (Ma nual  zooming and  focusing)

  Light-source lamp 250W Ultra High Pressure Mercury lamp
[Part No.: BHL5006-S/Rating: 250W]

 Screen si ze   40 ~ 200 / (with aspect  ratio:  4:3)

  Projection distance  Approx.  1.6m ~...

53
Dimensions (unit: mm)
Specifications
6M (Depth 10mm)
Attachment screw should be   
more than 6mm but less than 10mm in length.Center of lens
181 2067.5
298 27
298 300
360
A
89
267
115.9
65.4
15
20 ~ 56292
B
L D
LDAB
8.2 92.5 38.2 36.2
                              11.0  79.2
41.0 39.0

 Front 
 
Bottom

  To p

 Side 

54
4
2
9
8
16
876
543213
1
11 12 13
6712 109 45 3 815 14
24
7
15
23
6
14
22
3
11
19
2
10
18 5
13
214
12
20
1
9
17
Specifications
Pin arrangement

 Y/C terminal
Pin number Signal name
1GND (Y)
2GND (C)
3Y
4C
Pin number Signal name
1N/C
2RD
3TD
4N/C
5GND
Pin number Signal name
6N/C
7N/C
8N/C
9N/C

 RS-232C IN/OUT terminal

 PC 1 terminal

 PC 3 terminal
Pin number Signal name
1Red
2Green
3Blue
4N/C
5N/C
6GND (Red)
7GND (Green)
8GND (Blue)
Pin number Signal name
9N/C
10 GND (SYNC)
11 GND
12 N/C
13 H.SYNC
14...

55
Specifications

 RS-232C external control
By connecting a computer to the projector with a RS-232C cross cable (D-sub 9 pins), you can control the projector with the
computer. The commands to control the projector and the response data format against the received commands are explained
here.
For details, please consult the authorized dealer where you purchased your projector.
1. Communication Specifications
The communication specifications are as follows.
Baud rate 9600bps/19200bps
Data length 8 bits...

56
Specifications
3) Special parametersInput switching parameters
Character Hex. Meaning
‘0’ 30 Y/C
‘1’ 31 VIDEO
‘3’ 33 PC1
‘4’ 34 PC2
‘5’ 35 PC3
Operation mode parameters
Character Hex. Meaning
‘0000’ 30h 30h 30h 30h Stand-by mode
‘0001’ 30h 30h 30h 31h Power-on mode
‘0002’ 30h 30h 30h 32h Cool-down mode
‘0004’ 30h 30h 30h 34h Emergency mode
Function CommandAsking Data type
Power on ELSENumeric ValueON/OFF Special Data
OPERATE U0F X X X
X
HIDE U00
XX
X
Right Left reversalU17
XX
X
Top Bottom...

LEGAL INFORMATION
FIVE-YEAR LIMITED  WARRANTY 
This Dukane LCD projector is w arranted to the or iginal purchaser f or a period of 
five (5) y ears from the or iginal purchase date - in nor mal use and service -
against defects in mater ial and workmanship . DUKANE CORPORA TION
EXPRESSLY DISCLAIMS ALL O THER WARRANTIES OF MERCHANT ABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Dur ing the w arranty per iod, Dukane Cor poration will repair or replace (at the
man ufacturers option) an y such defective par...

Dukane Corporation
Audio Visual Products Division
2900 Dukane Drive
St. Charles, IL 60174-3395
E-mail: [email protected]
Phone: (630) 762-4040
Orders: (800) 676-2485
Information: (800) 676-2486
Fax: (630) 584-5156
Parts & Service: (800) 676-2487
Fax: (630) 584-0984
Audio Visual Products
Par t # 401-602-00