Dukane Imagepro 8943 Portable Lcd Projector Users Manual
Have a look at the manual Dukane Imagepro 8943 Portable Lcd Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
4
Network Functions
Configuring and controlling the projector via a web browser
You can adjust or control the projector via a network from a web browser \
on a PC
that is connected to the same network.
• Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.
• If JavaScript is disabled in your web browser configuration, you must enable
JavaScript in order to use the projector web pages properly. See the Help files
for your web browser for details on how to enable JavaScript.
• This...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-95.png "Page 96
4
Network Functions
Configuring and controlling the projector via a web browser
You can adjust or control the projector via a network from a web browser \
on a PC
that is connected to the same network.
• Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.
• If JavaScript is disabled in your web browser configuration, you must enable
JavaScript in order to use the projector web pages properly. See the Help files
for your web browser for details on how to enable JavaScript.
• This...")
![Page 97
5
Network Functions
When configuring or controlling the projector via a web browser, an ID and
password are required. There are two types of IDs, Administrator IDs and User
IDs. The following chart describes the differences between user and administrator
IDs.
Below are the factory default settings for administrator IDs, user IDs a\
nd
passwords.
ItemDescriptionAdministrator IDUser ID
Network InformationDisplays the projector’s current network configuration settings.√√
Network SettingsDisplays and...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-96.png "Page 97
5
Network Functions
When configuring or controlling the projector via a web browser, an ID and
password are required. There are two types of IDs, Administrator IDs and User
IDs. The following chart describes the differences between user and administrator
IDs.
Below are the factory default settings for administrator IDs, user IDs a\
nd
passwords.
ItemDescriptionAdministrator IDUser ID
Network InformationDisplays the projector’s current network configuration settings.√√
Network SettingsDisplays and...")
![Page 98
6
Settings
Settings
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. will be displayed.
) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3) Click the desired operation or configuration item on the main menu...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-97.png "Page 98
6
Settings
Settings
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. will be displayed.
) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3) Click the desired operation or configuration item on the main menu...")
![Page 100
8
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses....](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-99.png "Page 100
8
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses....")
![Page 101
9
Settings
Port Settings
Displays and configures communication port settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
ItemDescription
Network Control Port1 (Port:23)Configures command control port 1 (Port:23).
Port openClick the...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-100.png "Page 101
9
Settings
Port Settings
Displays and configures communication port settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
ItemDescription
Network Control Port1 (Port:23)Configures command control port 1 (Port:23).
Port openClick the...")
![Page 102
10
Settings
Mail Settings
Displays and configures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses.
NOTE
ItemDescription
Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings].
SMTP...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-101.png "Page 102
10
Settings
Mail Settings
Displays and configures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses.
NOTE
ItemDescription
Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings].
SMTP...")
![Page 103
Settings
Alert Settings
Displays and configures failure & warning alerts.
ItemDescription
Cover ErrorConfigures Cover Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-102.png "Page 103
Settings
Alert Settings
Displays and configures failure & warning alerts.
ItemDescription
Cover ErrorConfigures Cover Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The...")
![Page 104
Settings
Alert Settings (Continued)
ItemDescription
Lamp ErrorConfigures Lamp Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-103.png "Page 104
Settings
Alert Settings (Continued)
ItemDescription
Lamp ErrorConfigures Lamp Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...")
![Page 105
13
Settings
Alert Settings (Continued)
ItemDescription
Lamp Time ErrorConfigures Lamp Time Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-104.png "Page 105
13
Settings
Alert Settings (Continued)
ItemDescription
Lamp Time ErrorConfigures Lamp Time Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...")
![Page 106
4
Settings
Alert Settings (Continued)
ItemDescription
Other ErrorConfigures Other Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...](http://img.usermanuals.tech/thumb/5762/88748/w64_dukane-imagepro-8943-manual_d-105.png "Page 106
4
Settings
Alert Settings (Continued)
ItemDescription
Other ErrorConfigures Other Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...")
9 Settings Port Settings Displays and configures communication port settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.dresses. NOTE ItemDescription Network Control Port1 (Port:23)Configures command control port 1 (Port:23). Port openClick the [Enable] check box to use port 23. AuthenticationClick the [Enable] check box when authentication is required for this port. Network Control Port2 (Port:9715)Configures command control port 2 (Port:9715). Port openClick the [Enable] check box to use port 9715. AuthenticationClick the [Enable] check box when authentication is required for this port. Image Transfer Port (Port:9716)Configures the image transfer port (Port:9716). Port openClick the [Enable] check box to use port 9716. AuthenticationClick the [Enable] check box when authentication is required for this port. SNMP PortConfigures the SNMP port. Port openClick the [Enable] check box to use SNMP. Trap addressConfigures the destination of the SNMP Trap in IP format. SMTP PortConfigures the SMTP port. Port openClick the [Enable] check box to use the e-mail function.
10 Settings Mail Settings Displays and configures e-mail addressing settings. Click the [Apply] button to save the settings. • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a netw\ ork administrator before setting server addresses. NOTE ItemDescription Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings]. SMTP Server IP AddressConfigures the address of the mail server in IP format. Sender E-mail addressConfigures the sender e-mail address.The length of the sender e-mail address can be up to 255 alphanumeric characters. Recipient E-mail address Configures the e-mail address of up to five recipients. You can also specify [TO] or [CC] for each address. The length of the recipient e-mail address can be up to 255 alphanumeric characters.
Settings Alert Settings Displays and configures failure & warning alerts. ItemDescription Cover ErrorConfigures Cover Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Fan ErrorConfigures Fan Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e- mail to be sent.The length of the text can be up to 1024 alphanumeric characters.
Settings Alert Settings (Continued) ItemDescription Lamp ErrorConfigures Lamp Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Temp ErrorConfigures Temp Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Air Flow ErrorConfigures Air Flow Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail Text Configures the text of the e-mail to be sent. The length of the text can be up to 1024 alphanumeric characters.
13 Settings Alert Settings (Continued) ItemDescription Lamp Time ErrorConfigures Lamp Time Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Cool ErrorConfigures Cool Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Filter ErrorConfigures Filter Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail Text Configures the text of the e-mail to be sent. The length of the text can be up to 1024 alphanumeric characters.
4 Settings Alert Settings (Continued) ItemDescription Other ErrorConfigures Other Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Schedule Execution ErrorConfigures Schedule Execution Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. Lamp Time AlarmConfigures Lamp Time Alarm alert settings. Alarm TimeConfigures the lamp time to alert. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters.
15 Settings Alert Settings (Continued) ItemDescription Filter Time AlarmConfigures Filter Time Alarm alert settings. Alarm TimeConfigures the filter time to alert. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters.
16 Settings Schedule Settings Displays and configures schedule settings. ItemDescription DailyConfigures the daily schedule. ScheduleClick the [Enable] check box to enable daily scheduling. Schedule ListDisplays the current daily schedule. SundayConfigures the Sunday schedule. ScheduleClick the [Enable] check box to enable Sunday scheduling. Schedule ListDisplays the current Sunday schedule. MondayConfigures the Monday schedule. ScheduleClick the [Enable] check box to enable Monday scheduling. Schedule ListDisplays the current Monday schedule. TuesdayConfigures the Tuesday schedule. ScheduleClick the [Enable] check box to enable Tuesday scheduling. Schedule ListDisplays the current Tuesday schedule. WednesdayConfigures the Wednesday schedule. ScheduleClick the [Enable] check box to enable Wednesday scheduling. Schedule ListDisplays the current Wednesday schedule. ThursdayConfigures the Thursday schedule. ScheduleClick the [Enable] check box to enable Thursday scheduling. Schedule ListDisplays the current Thursday schedule. FridayConfigures the Friday schedule. ScheduleClick the [Enable] check box to enable Friday scheduling. Schedule ListDisplays the current Friday schedule. SaturdayConfigures the Saturday schedule. ScheduleClick the [Enable] check box to enable Saturday scheduling. Schedule ListDisplays the current Saturday schedule.
7 Settings Schedule Setting (Continued) ItemDescription Specific date No1Configures the specific date (No.1) schedule. ScheduleClick the [Enable] check box to enable specific date (No.1) scheduling. Month/DayConfigures the Month and date. Schedule ListDisplays the current specific date (No.1) schedule. Specific date No.2Configures the specific date (No.2) schedule. Click the [Apply] button to save the settings. ScheduleClick the [Enable] check box to enable specific date (No.2) scheduling. Month/DayConfigures the Month and date. Schedule ListDisplays the current specific date (No.2) schedule. Specific date No.3Configures the specific date (No.3) schedule. ScheduleClick the [Enable] check box to enable specific date (No.3) scheduling. Month/DayConfigures the Month and date. Schedule ListDisplays the current specific date (No.3) schedule. Specific date No.4Configures the specific date (No.4) schedule. ScheduleClick the [Enable] check box to enable specific date (No.4) scheduling. Month/DayConfigures the Month and date. Schedule ListDisplays the current specific date (No.4) schedule. Specific date No.5Configures the specific date (No.5) schedule. ScheduleClick the [Enable] check box to enable specific date (No.5) scheduling. Month/DaySet the Month and date. Schedule ListDisplays the current specific date (No.5) schedule.
8 Settings To add additional functions and events click the [Add] button and set the following items. ItemDescription TimeConfigures the time to execute commands. CommandConfigures the commands to be executed. Power ParameterConfigures the parameters for power control. Input Source ParameterConfigures the parameters for input switching. Display Image ParameterConfigures the parameters for display of transfer image data. Click the [Register] button to add new commands to the Schedule List. Click the [Delete] button to delete commands from the Schedule list. Date/Time Settings Displays and configures the date and time settings. ItemDescription Current DateConfigures the current date in Year/Month/Day format. Current TimeConfigures the current time in Hour:Minute:Second format. Schedule Setting (Continued)