Dukane Imagepro 8943 Portable Lcd Projector Users Manual

39

SCREEN Menu
ItemDescription
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF    
Feature
MyScreenScreen can be registered by the MyScreen item (40).
ORIGINALScreen preset as the standard screen.
TURN OFFPlain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (38) after several minutes....

40

SCREEN Menu
ItemDescription
MyScreen
This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
.   Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if you start capturing an image from the current screen.Please wait for the target image to be displayed, and press the ENTER button on the remote control when the image is...

4

SCREEN Menu
ItemDescription
MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
TURN ON ó TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting“NO INPUT IS DETECTED”“SYNC IS OUT OF RANGE”“Searching….” while searching for the input“Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ratio displayed by changingThe indication of the...

4

OPTION Menu
OPTION Menu
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON ó TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. 
RGB    ð RGB    ð M  -D ð COMPONENT ð S-VIDEO ð VIDEO       
AUTO 
KEYSTONE 
Using the ▲/▼...

43

ItemDescription
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
AUTO OFFENABLE
AUTO OFFDISABLE0
When the time is set to 0, the projector is not turned off automatically.When the time is set to   to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote...

44

ItemDescription
MY BUTTON
This item is to assign one of the following function to MY BUTTON 
 and    on the remote control (6).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
• RGB : Sets port to RGB  .
• RGB
 : Sets port to RGB  .
• M
 -D: Sets port to M  -D.
• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).• S-VIDEO: Sets port to S-VIDEO.• VIDEO: Sets...

45

ItemDescription
SERVICE
AUTO ADJUSTUsing the ▲/▼ buttons enables/disables the automatic adjustment.When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
ENABLE ó DISABLE
• Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly.  In such a case, please choose DISABLE to disable the automatic...

46

ItemDescription
SERVICE
KEY LOCKUsing  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When TURN  ON  is  selected,  the  buttons  on  the  projector  except  the STANDBY/ON button are locked.TURN ON ó TURN OFF• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
REMOTE RECEIV.(1) Select a remote sensor using the ▲/▼ button. :FRONT 
ó   :TOP ó 3:REAR
(

) Switch it using the ENTER button
¨ (off) ó þ (on)
•...

47

ItemDescription
SECURITY
This projector is equipped with security functions.User registration is required before using the security functions.Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 2400. This PASSWORD can be changed (  .   Changing the PASSWORD). • It is strongly recommended the...

48

ItemDescription
SECURITY
1.3 If you have forgotten your PASSWORD
.3-     Follow the procedure in   .  -   to display the ENTER PASSWORD BOX.

.3-

 
 
While the ENTER PASSWORD BOX is 
displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds.
The 

0 digit Inquiring Code will be displayed. 
NOTE: If there is no key input for about 55 seconds while the...