Dukane Imagepro 8943 Portable Lcd Projector Users Manual

9

Adjusting the zoom and focus
. Use the zoom ring to adjust the screen size.  
. Use the focus ring to focus the picture.
Operating
Focus ringZoom ring
Adjusting the lens shift
. Use the vertical lens shift dial to shift 
the picture upward or downward.  
. Use the horizontal lens shift dial to 
shift the picture left or right.
Using the automatic adjustment feature
. Press the AUTO button on the remote control.  
 For an RGB signal 
The vertical position, the horizontal...

0

Adjusting the position
. Press the POSITION button on the remote control. 
The “POSITION” indication will appear on the screen.
. Use the cursor buttons ▲/▼/◄/► to adjust the picture 
position.
When you want to reset the operation, press the RESET button on the remote 
control during the operation.
To complete this operation, press the POSITION button again. Even if you \
do 
not do anything, the dialog will automatically disappear after a few sec\
onds.
● When this function is...



Operating
Using the magnify feature
. Press the ON button of MAGNIFY on the remote control.   
The “MAGNIFY” indication will appear on the screen 
(although the indication will disappear in several seconds with 
no operation), and the projector will go into the MAGNIFY 
mode.
. Use the cursor buttons ▲/▼ to adjust the zoom level. 
To move the zoom area, press the POSITION button in the MAGNIFY mode, 
then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the 
zoom...



Operating
Temporarily blanking the screen
. Press the BLANK button on the remote control.  
The blank screen will be displayed instead of the screen 
of input signal. Please refer to the BLANK item in SCREEN 
menu (38).
To exit from the blank screen and return to the input signal screen, pres\
s the  
BLANK button again. 
● The projector automatically returns to the input signal screen when one of 
the projector’s buttons or the remote control buttons is pressed or one of the 
commands...

3

Operating
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, 
SCREEN, OPTION, NETWORK, and EASY MENU. EASY MENU consists of functions 
often used, and the other menus are classified into each purpose. Each of these menus is 
operated using the same methods. The basic operations of these menus are as follows.
. Press the MENU button on the remote control or one of 
the cursor buttons on the projector.   
The Advanced MENU, or EASY MENU that...

4

EASY Menu
EASY Menu
ItemDescription
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (29).
AUTO 
KEYSTONE EXECUTE
Using the ► button executes the auto keystone function. See the AUTO KEYSTONE  EXECUTE item in SETUP menu (35).
KEYSTONE Using the ◄/► buttons corrects the vertical keystone distortion.See the KEYSTONE  item in SETUP menu (35).
KEYSTONE Using the ◄/► buttons corrects the horizontal keystone distortion.See the KEYSTONE  item in SETUP...

5

EASY Menu
ItemDescription
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.See the BRIGHTNESS item in PICTURE menu (26).
CONTRASTUsing the ◄/► buttons adjusts the contrast.See the CONTRAST item in PICTURE menu (26).
COLORUsing the ◄/► buttons adjusts the strength of whole color.See the COLOR item in PICTURE menu (27).
TINTUsing the ◄/► buttons adjusts the tint.See the TINT item in PICTURE menu (27).
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.See the SHARPNESS item in PICTURE...

6

PICTURE Menu
PICTURE Menu
ItemDescription
BRIGHTNESSUsing the ▲/▼ buttons adjusts the brightness.Light ó Dark
CONTRASTUsing the ▲/▼ buttons adjusts the contrast.Strong ó Weak
GAMMA
Using the ▲/▼ buttons switches the gamma mode.
 #   DEFAULT ó#   CUSTOM ó #   DEFAULT ó #   CUSTOM ó #3 DEFAULT 
#5 CUSTOM ó #5 DEFAULT ó #4 CUSTOM ó #4 DEFAULT ó #3 CUSTOM
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a...

7

ItemDescription
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and...

8

PICTURE Menu
ItemDescription
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  ó  THEATER  ó  TURN OFF               
Feature
PRESENTATIONThe active iris displays the best presentation image for both bright and dark scenes.
THEATERThe active iris displays the best theater image for both bright and dark scenes.
TURN OFFThe active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select TURN...