Dukane Imagepro 8943 Portable Lcd Projector Users Manual

Portable LCD Projector
Model 8943
USER’S MANUAL
401-8943-00 


Projector
8943
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING  ► Before using this product, please read the "User's Manual - 
Safety Guide" and related manuals to ensure the proper use of this produ\
ct. 
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
WARNING This  symbol  indicates  information  that,  if  ignored,...


About this manual  .  .  .  .  .  .  .  .  .  . 1
Content   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Projector features   .  .  .  .  .  .  .  .  .  . 3
Preparations   .  .  .  .  .  .  .  .  .  .  .  .  .  . 3 
Contents of package  . . . . . . . . . . . . .3 
Fastening the lens cover  . . . . . . . . . .3
Part names   .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4 
Projector  . . . . . . . . . . . . . . . . . . . . . . 4 
Control panel  . . . . . . . . . . . . . . . . . . . 5 
Rear...

3
Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover to the projector using 
the included strap.
. Fix the strap to the strap hole of the lens 
cover.
. 
Put one side of the strap into the groove on 
the rivet.
3. 
Push the rivet into the rivet hole.
Projector features / Preparations
Projector features
This projector is used to project various picture signals onto a screen.\
 This 
projector requires only a minimal amount of space for installation and c\
an...

4

Part names
Part names
Projector
( ) Speakers (x 4) (37).
(

) Focus ring (
19)(3) Zoom ring (19)
(4) 
 
Lamp cover (
56) The lamp unit is inside.(5) Lens shift cover (19)(6) Horizontal lens shift dial (19)(7) Vertical lens shift dial (19)(8) Front cover(9) Lens (61)
(

0) Lens cover (
3)
(

) Remote sensors (x 3) (
14)
(

) Elevator feet (x 

) (
9)
(

3) Elevator knobs (x 

) (
9)
(

4) 
 
Filter cover (
58) The air filter and...

5

Part names
Control panel
( ) STANDBY/ON button (16)
(

) 
 
MENU button (
23) It consists of four cursor buttons.(3) INPUT button (17)(4) POWER indicator (16)(5) TEMP indicator (63)(6) LAMP indicator (63)
Rear panel
(  ) Shutdown switch (65)
(

) Security slot (
9)(3) Security bar (9)(4) AC inlet (12)(5) Power switch (16)
(6) RGB

 port (
10)
(7) RGB

 port (
10)(8) CONTROL port (10)
(9) M

-D port (
10)
(

0) VIDEO port (
10)
(

)...

6

Part names
Remote control
( )   Laser pointer (13) It is a beam outlet.
(

) LASER INDICATOR (
13)(3) LASER button (13)(4) STANDBY/ON button (16)(5) VOLUME button (17)(6) MUTE button (17)(7) VIDEO button (18)(8) RGB button (17)(9) SEARCH button (18)
(

0) AUTO button (
19)
(

) ASPECT button (
18) 
(

) POSITION button (
20)
(

3) KEYSTONE button (
20)
(

4) MAGNIFY - ON button (
21)
(

5) MAGNIFY - OFF button (
21)
(

6) FREEZE...

7

Setting up
Setting up
Install the projector according to the environment and manner the projec\
tor will be 
used in.
WARNING  ►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage t\
o the 
projector. Using a damaged projector could then result in fire and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surfac\
e such 
as a wobbly or inclined stand.
• 
 
Do not place the projector...

8

Arrangement
Refer to the illustrations and tables below to determine screen size and\
 projection distance.
The values shown in the table are calculated for a full size screen:  0  4×768 (a) Screen size (diagonal)
(b) Projection distance (±
 0%)
(c) Screen height (±
 0%), when the vertical lens shift is set full upward (
19)
Setting up
(a) Screen size[inch (m)]
4 : 3 screen  6 : 9 screen(b) Projection distance  [m (inch)](c) Screen height[cm (inch)](b) Projection distance...