Dukane Imagepro 8943 Portable Lcd Projector Users Manual

19

Settings
Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
ItemDescription
Daylight Savings TimeClick the [ON] check box to enable daylight savings time and set the following items.
SNTP Server IP AddressConfigures the SNTP server address in IP format.
CycleConfigures the interval at which to retrieve Date and Time information from the SNTP server. (hours:minutes).
StartConfigures the date and time daylight savings time begins.
MonthConfigures the month daylight savings...

20

Settings
Security Settings
ItemDescription
Administrator authorityConfigures the Administrator ID and Password.
Administrator IDConfigures the Administrator ID.The length of the text can be up to 32 alphanumeric characters.
Administrator Password
Configures the Administrator Password.The length of the text can be up to 255 alphanumeric characters.
Re-enter Administrator PasswordRe-enter the above password for verification.
Displays and configures passwords and other security settings.
User...



Click the [Apply] button to save the settings.
Authentication Password
Configures the Authentication Password.The length of the text can be up to 16 alphanumeric characters.
Re-enter Authentication PasswordUsed to re-enter the above password for verification.
SNMPConfigures the community name if SNMP is used.
Community NameConfigures the community name.The length of the text can be up to 64 alphanumeric characters.
• The new configuration settings are activated after restarting the 
network...



Projector Control
Projector Control
Projector Control
The items shown in the table below can be 
performed using the [Projector Control] menu.
Select an item using the up and down arrow keys 
on the PC.
Most of the items have a submenu.
Refer to the table below for details.
Controls the projector.
ItemDescription
Main
PowerTurns the power On/Off.
Input SourceSelects the input source.
Picture ModeSelects the Picture Mode setting.
Blank On/OffTurns Blank On/Off.
MuteTurns Mute On/Off....

23

Projector Control
Projector Control (Continued)
ItemDescription
Image
AspectSelects the Aspect setting.
Over ScanSelects the Over Scan setting.
V PositionAdjusts the V Position.
H PositionAdjusts the H Position.
H PhaseAdjusts the H Phase.
H SizeAdjusts the H Size.
Auto AdjustPerforms Auto Adjustment.
Input
ProgressiveSelects the progressive setting.
Video NRSelects the Video NR setting.
3D-YCSSelects the 3D-YCS setting.
Color SpaceSelects the Color Space.
ComponentSelects the Component terminal...

4

Option
VolumeAdjusts the Volume setting.
TrebleAdjusts the Treble setting.
BassAdjusts the Bass setting.
SRS WOWSelects the SRS WOW setting.
SpeakerTurns Speaker On/Off.
Audio-RGB1Assigns the Audio-RGB1 input terminal.
Audio-RGB2Assigns the Audio-RGB2 input terminal.
Audio-M1-DAssigns the Audio-M1-D input terminal.
Audio-VideoAssigns the Audio-Video input terminal.
Audio-S-VideoAssigns the Audio-S-Video input terminal.
Audio-ComponentAssigns the Audio-Component input terminal.
Auto SearchTurns...

25

Projector Control
Network Restart
Restarts the projector’s network connection.
ItemDescription
RestartRestarts the projector’s network connection in order to activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser.
NOTE
Logoff
When logoff is clicked, the logon screen is displayed (6 : Fig. ).
Projector Status
Displays and configures the current projector status.
ItemDescription
Error StatusDisplays...

26

Failure & Warning Alerts via E-mail
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specified e-mail addresses when 
the projector requires maintenance or has encountered an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses 
power.
NOTE
Mail Settings(10)
To use the projector’s e-mail function please configure the following items via a 
web browser.
Example: If the IP address of...

7

Failure & Warning Alerts via E-mail
 8)  Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] 
on the main menu.
 9)  Select and configure each alert item. Refer to [Alert Settings] in [Configuring 
and Controlling the Projector via a Web Browser] for further information.
10) Click the [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line  :   
Text  : 
  Date  
 Time  
 IP Address  
 MAC Address  
Mail Settings (Continued) 

8

Projector management via SNMP
Projector management via SNMP
When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a 
specified PC.
• It is recommended that SNMP functions be carried out by a network 
administrator. 
• SNMP management software must be installed on the computer to monitor 
the projector via SNMP.
NOTE
SNMP settings
Configure the following items via a web browser to use SNMP.
Example: If the IP address of the projector is set to 192.168.1.10:
• A Network...