Dukane Imagepro 8918 Projector Users Manual

30

IMAGE Menu
ItemDescription
H PHASE
Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
Right ó Left
• This item can be selected only for an RGB signal or a component 
video signal. (except 5
 5i (480i), 6  5i (576i), SCART RGB)
H SIZE
Using the ▲/▼ buttons adjusts the horizontal size.
Large ó Small
• This item can be selected only for an RGB signal.
• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the...

3

INPUT Menu
INPUT Menu
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó TURN OFF
• This function is performed only for an interlaced signal of a VIDEO 
input, an S-VIDEO input or COMPONENT VIDEO input of 5  5i 
(480i), 6
 5i (576i) or   5i (  080i) signal.
• When TV or FILM is selected, the screen image will be sharp. 
FILM adapts to the   -3 Pull-Down conversion system. But these 
may cause a certain defect (for example,...

3

ItemDescription
COMPONENT
Using the ▲/▼ buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port.
COMPONENT ó SCART RGB 
When the SCART RGB is selected, the COMPONENT (Y, Cb/Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer.
VIDEO FORMAT
Set the video format for the s-video port and video port.
(
 ) Use th
e ◄/► buttons to select the input port.
(2)...

33

ItemDescription
FRAME LOCK
Using the ▲/▼ buttons turns the frame lock function on/off. 
TURN ON ó TURN OFF
• This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving pictures are displayed more smoothly.
• This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.
RGB IN
Set the RGB input signal type for the RGB port.
( ) Use th
e ◄/► buttons to select the RGB port to be...

34

INPUT Menu
ItemDescription
RESOLUTIONThe resolution for the RGB   and RGB   input signals can be set on 
this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed.
(
 )  In the RESOLUTION menu select the 
resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
(3) Pressing the ► or ENTER button when selecting a STANDARD resolution...

35

SETUP Menu
SETUP Menu
ItemDescription
AUTO 
KEYSTONE EXECUTE
Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the Menu. When the slant of the projector is changed, executes this function again.
• The adjustable range of this function will vary among inputs. For some input, this function may not work...

36

SETUP Menu
SETUP Menu (continued)
ItemDescription
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When the WHISPER is selected, acoustic noise and screen brightness are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT 
If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off. 

37

AUDIO Menu
AUDIO Menu
ItemDescription
VOLUMEUsing the ▲/▼ buttons adjusts the volume.
High ó Low
TREBLEUsing the ▲/▼ buttons adjusts the treble level.
High ó Low
BASSUsing the ▲/▼ buttons adjusts the bass level. 
High ó Low
SRS WOW
Using the ▲/▼ buttons switches the mode for SRS WOW mode. 
HIGH ó MID ó OFF
• SRS WOW™ accomplishes this by providing a panoramic three-dimensional audio image that extends the sound field in both the horizontal and vertical planes, and lowers the perceived bass response...

38

SCREEN Menu
SCREEN Menu
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
SUOMI ó POLSKI ó TÜRKÇE
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
    ó    ó        ó SVENSKA ó
MENU POSITIONUsing the ◄/►/▲/▼ buttons adjusts the menu position.To quit the operation, press the MENU button on the remote control 
or keep no operation for about 
 0 seconds.
BLANK
Using the ▲/▼ buttons switches the mode for the blank...

39

SCREEN Menu
ItemDescription
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF    
Feature
MyScreenScreen can be registered by the MyScreen item (40).
ORIGINALScreen preset as the standard screen.
TURN OFFPlain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (38) after several minutes....