Dukane Imagepro 8918 Projector Users Manual

Portable LCD Projector

Model 8943

8918

USER’S MANUAL

#070030 

1
Projector
8918/8943
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNINGBefore using this product, please read the “Safety Guide”
section and related sections to ensure the proper use of this product. 
After reading section, store this in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
WARNINGThis sym bol indicates info rmation tha t, if ignored, c ould po ssibly 
result...

2
About this manual. . . . . . . . ..1
Content.. . . . . . . . . . . ... . ..2
Projector features . . . . . . . . ..3
Preparations . . . . . . . . . . . ...3Contents of package . . . . . . . . . . . ..3Fastening the lens cover . . . . . . . . ..3
Part names. . . . . . . . . . . . ...4Projector .. . . . . . . . . . . . . . . . . . . ..4Control panel . . . . . . . . . . . . . . . . . ..5Rear panel . . . . . . . . . . . . . . . . . . . ..5Remote control . . . . . . . . . . . . . . . ..6
Setting up. . . . ....

3

Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover to the projector using 
the included strap.
. Fix the strap to the strap hole of the lens 
cover.
. 
Put one side of the strap into the groove on 
the rivet.
3. 
Push the rivet into the rivet hole.
Projector features / Preparations
Projector features
This projector is used to project various picture signals onto a screen.\
 This 
projector requires only a minimal amount of space for installation and c\
an...

4

Part names
Part names
Projector
( ) Speakers (x 4) (37).
(

) Focus ring (
19)(3) Zoom ring (19)
(4) 
 
Lamp cover (
56) The lamp unit is inside.(5) Lens shift cover (19)(6) Horizontal lens shift dial (19)(7) Vertical lens shift dial (19)(8) Front cover(9) Lens (61)
(

0) Lens cover (
3)
(

) Remote sensors (x 3) (
14)
(

) Elevator feet (x 

) (
9)
(

3) Elevator knobs (x 

) (
9)
(

4) 
 
Filter cover (
58) The air filter and...

5

Part names
Control panel
( ) STANDBY/ON button (16)
(

) 
 
MENU button (
23) It consists of four cursor buttons.(3) INPUT button (17)(4) POWER indicator (16)(5) TEMP indicator (63)(6) LAMP indicator (63)
Rear panel
(  ) Shutdown switch (65)
(

) Security slot (
9)(3) Security bar (9)(4) AC inlet (12)(5) Power switch (16)
(6) RGB

 port (
10)
(7) RGB

 port (
10)(8) CONTROL port (10)
(9) M

-D port (
10)
(

0) VIDEO port (
10)
(

)...

6

Part names
Remote control
( )   Laser pointer (13) It is a beam outlet.
(

) LASER INDICATOR (
13)(3) LASER button (13)(4) STANDBY/ON button (16)(5) VOLUME button (17)(6) MUTE button (17)(7) VIDEO button (18)(8) RGB button (17)(9) SEARCH button (18)
(

0) AUTO button (
19)
(

) ASPECT button (
18) 
(

) POSITION button (
20)
(

3) KEYSTONE button (
20)
(

4) MAGNIFY - ON button (
21)
(

5) MAGNIFY - OFF button (
21)
(

6) FREEZE...

7

Setting up
Setting up
Install the projector according to the environment and manner the projec\
tor will be 
used in.
WARNING  ►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage t\
o the 
projector. Using a damaged projector could then result in fire and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surfac\
e such 
as a wobbly or inclined stand.
• 
 
Do not place the projector...

8

Arrangement
Refer to the illustrations and tables below to determine screen size and\
 projection distance.
The values shown in the table are calculated for a full size screen:  0  4×768 (a) Screen size (diagonal)
(b) Projection distance (±
 0%)
(c) Screen height (±
 0%), when the vertical lens shift is set full upward (
19)
Setting up
(a) Screen size[inch (m)]
4 : 3 screen  6 : 9 screen(b) Projection distance  [m (inch)](c) Screen height[cm (inch)](b) Projection distance...

9

Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or ri\
ght, use the 
elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project at 
a suitable angle to the screen, elevating the front side of the 
projector within 8 degrees.
This projector has   elevator feet and    elevator knobs. An elevator foot is 
adjustable while pulling up the elevator knob on the same side as it.
....