Dukane Imagepro 8806 Portable Lcd Projector Users Manual

19
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
9Select SSID from “Site Survey ” (if necessary).
A list of SSID that can be connected to wireless LAN in this place are d\
isplayed, and the SSID that are
to be connected are selected from this list.  When SSID is selected from\
 the list, the  “SSID ” field,
“ Mode ” field and  “Channel ” field will also be automatically set.
 Press the 
SELECT    button once to highlight  “Site Survey ” and press the  button.
Searching...

20
5. Setting the LAN Setting of Projector
11Select “Mode ” (if necessary).
The communication mode of the SSID selected in  “Site Survey ” are automatically selected.
The settings can be changed by moving the highlight to the  “Mode ” field and pressing the 
button.
• “Infrastructure ”.............. This is selected if communication is performed with two or more devices
connected by wired or wireless LAN via an access point.
• “802.11 Ad  Hoc ”............ This is selected to perform peer-to-peer...

21
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
13Select “WEP ” page (if necessary).
Proceed to step 17 if WEP is not set.
 Use the 
SELECT  / button to select the  “Network Type ” tab, and press the 
button to highlight the  “WEP ” tab.
The  “WEP ” page will be displayed.
14Select  “WEP ”.
Select whether WEP (encryption) is performed or not.
To perform WEP (encryption), set an encryption key.
• Disable ................... WEP (encryption) is not performed.  There is...

22
5. Setting the LAN Setting of Projector
16Input “Key 1 ” to  “Key 4 ”.
If  “64 bit ”,  “128 bit ”, or  “152 bit ” is selected from  “WEP ”, input an encryption key.
Set the same encryption key as the access point and personal computer to\
 be connected by the
wireless LAN.
Four types of keys can be input for WEP.
Authentic Method
64 bit
128 bit
152 bitAlphanumeric 
Character (ASCII) 5 characters
13 characters
16 charactersHexadecimal 
Number (HEX) 10 characters
26 characters
32 characters
 Use the...

23
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
17Finalize “Advanced ”.
 Use the SELECT  / button to highlight [OK] and press the  button.
The  “PC card ” page will be displayed again.
18Reconnect the network.
 Use the SELECT  / button to highlight  “Reconnect ” and press the  button.
19Finalize the setting.
 Use the SELECT  / button to highlight [OK] and press the  button.
The contents of the setting will be stored in the memory of the projecto\
r. 

24
5. Setting the LAN Setting of Projector
5-3. Wired LAN
When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the
“Built-in ” page of  “LAN Mode ” selected from On-Screen Menu.
 Flow of setting
1
3
Step      Display Built-in page of LAN Mode.
4Step Input IP Address.
Input Subnet Mask.
Input Gateway.
2Step      Select Profiles.
5Step      Input DNS Configuration.
6Step      Reconnect the network.
7Step      Finalize the setting. Step      Enable or disable DHCP....

25
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
Setting Wired LAN
1Display the  “Built-in ” page of  “LAN Mode ”.
Configure the setting of wired LAN in the  “Built-in ” page of  “LAN Mode ” selected from On-Screen
Menu.  If  “LAN Mode ” is not displayed, refer to  “5-1. Displaying On-Screen Menu (LAN Mode) ”
(
page 13).
2Select  “Profiles ”.
“Profile 1 ” or  “Profile 2 ” can be stored in the memory of the projector as the setting of LAN.
 Press the 
SELECT    button...

26 6. Setting the LAN Setting of Personal Computer
6. Setting the LAN Setting of Personal Computer
([Example] Wireless LAN of Windows XP: Ad Hoc connection)
This section explains the procedure for Ad Hoc connection of wireless LAN between the personal
computer and projector, by using the wireless network setting function with Windows XP Service
Pack 2 (SP2).
Preparation:•Install a commercially available wireless LAN card driver to your person\
al computer, and
complete setup of the wireless LAN card....

27
Setting the LAN Setting of Personal Computer
6. Setting the LAN Setting of Personal Computer
6
3Right-click the [Wireless Network Connection] icon and click [Property].
3-2
3-1Right-clickClick
A property window for wireless network connections will be displayed.
4From the list of [This connection uses the following Items:], select (c\
lick)
[Internet Protocol (TCP/IP)] and click [Properties].
4-2
4-1Select Click
•The property window for wireless network connections will be displayed a\
gain. 

28 6. Setting the LAN Setting of Personal Computer
5Click [Use the following IP address:], and input [IP address]and[Subnet \
mask].
•If, for example, the [IP address] and [Subnet mask] of the projector are\
 set as show in  “Example of
settings for projector ” on page 26, set the personal computer as shown below.
• Example of setting the IP address and subnet mask.
Projector (     page 26)
192.168.100.10
255.255.255.0
IP Address
Subnet Mask
Personal computer(Screen Below)
192.168.100.20
255.255.255.0...