Dukane Imagepro 8806 Portable Lcd Projector Users Manual

9
2
2. Operating Environment
Operating Environment
2-2. Operating Environment
The following is the operating environment for Image Express Utility 2.0\
.  For the operating
environment of other software, please refer to the help function of each\
 software.
Windows 2000 Professional
Windows XP Home Edition
Windows XP Professional
Windows XP Tablet PC Edition
•Windows power-saving function is not supported.
• The Easy Connection only supports the Computer 
Administrator authority of Windows XP.
IBM PC/AT...

10
3. Connecting LAN Cable
3. Connecting LAN Cable
Connect a LAN cable to the LAN port (RJ-45) of the projector when conn\
ecting the projector to
wired LAN.
After connecting LAN cable to the projector, set the required settings for the projector
(
page 24).
PC CARDCOMPONENT INUSB LANAUDIO INCOMPUTER 3 IN
COMPUTER 1 IN COMPUTER 2 INPC CONTROLMONITOR OUT
AUDIO OUTCb/Pb
L/MONO R
Y
Cr/Pr
AC IN
S-VIDEO IN VIDEO INAUDIO IN
LAN
Server
HUB, etc.LAN cable
(commercially available) 

11
4. Attaching Wireless LAN Card
Attaching Wireless LAN Card
4
4. Attaching Wireless LAN Card
Insert the wireless LAN card into the PC card slot on the rear panel of \
the projector.
Important
•The wireless LAN card must be inserted into the PC card slot in the corr\
ect direction.  It
cannot be inserted in the reverse direction.  If the card is inserted in\
 the reverse direction
with excessive force applied, the pins in the projector and the PC card \
slot may break.  Be
sure to insert the wireless...

12
4. Attaching Wireless LAN Card
Removing card from PC card slot
1Press POWER ON/STAND BY button to set the projector to Stand-by mode,
press the  “O (off) ” side of the main power switch of the projector.
2Slowly press the PC card eject button.
The PC card eject button will slightly come forward.
3Slowly press the PC card eject button once again.
The inserted card will slightly come forward.
PC CARDCOMPONENT INUSB LAN
AUDIO IN COMPUTER 3 IN
COMPUTER 1 IN COMPUTER 2 IN
PC CONTROLMONITOR OUT
AUDIO OUT...

13
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
5. Setting the LAN Setting of Projector
ReferenceFor how to turn on/off the power to the projector and how to operate the buttons and
remote control of the projector, refer to “User ’s Manual ” included in the User ’s Manual
CD-ROM.
5-1. Displaying On-Screen Menu (LAN Mode)
Preparation: Turn on the power to the projector and project images to the screen.
It is not necessary to select the signals.
1Press the  button.
The...

14
5. Setting the LAN Setting of Projector
4Press the  button three times to highlight the “Installation ” tab.
5Press the SELECT    button three times to highlight  “LAN Mode ”, and press
the 
 button.
The  “LAN Mode ” screen will be displayed.
• To make setting of wireless LAN
Proceed to  “5-2. Wireless LAN ” (
next page).
• To make setting of wired LAN
Proceed to  “5-3. Wired LAN ” (
page 24). 

15
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
5-2. Wireless LAN
When inserting the wireless LAN card into the PC card slot of the projec\
tor, configure the LAN
settings in the “PC Card ” page of  “LAN Mode ” selected from On-Screen Menu.
 Flow of Setting
Setting of Network Type.
Select SSID in Site Survey.
Input SSID (if necessary).
Select Mode (if necessary).
Select Channel (if necessary).
Setting of WEP
Select the number of bits of WEP.
Select Key Select.
Set Key...

16
5. Setting the LAN Setting of Projector
Setting Wireless LAN
1Display the  “PC Card ” page of  “LAN Mode ”.
Configure the setting of wireless LAN in the PC Card ” page of  “LAN Mode ” selected from On-Screen Menu.
 In the  “LAN Mode ” setting window, if the  “Built-in ” tab is highlighted, press the 
 button
to highlight  “PC Card ”.
The  “PC Card ” page will be displayed.
• If “LAN Mode ” is not displayed, refer to  “5-1. Displaying On-Screen Menu (LAN Mode) ” (page 13).
2Select  “Profiles ”....

17
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
3Set “DHCP ”.
Check this check box if the network to which the projector is to be conn\
ected automatically assigns the
IP address via the DHCP server.
 Press the 
SELECT    button once to highlight  the  “DHCP ” check box and press the  button.
A check will be given if there is no mark found in the box.
• To clear the check box, press the 
 button once again.
• If “DHCP ” is checked, move the highlight to  “Advanced ”...

18
5. Setting the LAN Setting of Projector
5Input “Subnet Mask ”.
If  “DHCP ” is not checked, input the subnet mask of the network to which the proje\
ctor is connected.
The method of inputting is the same as that of the  “IP Address ” field.
6Input  “Gateway ”.
If  “DHCP ” is not checked, input the default gateway of the network to which the p\
rojector is connected.
The method of inputting is the same as that of the  “IP Address ” field.
7Input  “DNS Configuration ”.
Set the IP address of the DNS...