Dukane Imagepro 8805 Liquid Crystal Projector Users Manual

E-21
5. Press the ENTER button.
6. Use the SELECT 

 button to move the projected image frame
as shown on the example.
7. Press the ENTER button.
Screen
The confirmation screen is displayed.
On the Cornerstone adjustment screen, select
“Exit” and then “OK”, or press the CANCEL but-
ton on the remote control. 8. Use the SELECT 

 button to select another icon which points
in the direction.
Screen
9. Press the SELECT 
 or  button to highlight the [OK] and press the
ENTER button.
This completes the...

E-22
Optimizing RGB Picture Automatically
Adjusting the Image Using Auto Adjust
Optimizing RGB image automatically
Press the Auto Adjust button to optimize an RGB image automatically.
[Poor picture]
[Normal picture]
AUTO ADJ.
Press the Auto Adjust button to fine-tune the computer image or to re-
move any vertical banding that might appear and to reduce video noise,
dot interference or cross talk (this is evident when part of your image
appears to be shimmering). This function adjusts the clock...

E-23
Setting the function switch
There are two switches on the bottom of the battery case: an applicable
projector selector switch (1) and laser enable/disable switch (2). Check
the projector being used and decide whether to enable or disable laser,
then set these switches as necessary using the tip of a thin ball-point
pen. On this model, an applicable projector selector switch (1) is not
used.
ON OFF
Switch (2)
On: Enabled (the laser lights when the LASER button is pressed)
[Factory default]
Off:...

E-24
ASPECT OFF
VIDEO
AUTO ADJ.RGB VIEWER
LASERON
3D REFORMHELPPOINTER
VOLUME MAGNIFY
ZOOMPIC-MUTESLIDE
FOLDER
SLIDE
LIST
POWER
FREEZE
FOCUS
ASPECT OFF
VIDEO
AUTO ADJ.RGB VIEWER
LASERON
3D REFORMHELPPOINTER
VOLUME MAGNIFY
ZOOMPIC-MUTESLIDE
FOLDER
SLIDE
LIST
POWER
FREEZE
FOCUS
CONVENIENT FEATURES
Using the Remote Mouse Function
The built-in remote mouse function enables you to operate your
computers mouse functions from the remote control (Computer mode).
It is a great convenience for clicking through...

E-25
Turning Off the Image and Sound
Press the Picture Mute button to turn off the image and sound for a
short period of time. Press again to restore the image and sound.
PIC-MUTE
Freezing a Picture
Press the Freeze button to freeze a picture. Press again to resume
motion.
FREEZE
Using the Pointer
You can use one of eight pointers to draw your audiences attention to
the portion of a projected image you want.
Press the Pointer button to dis-
play the pointer.
POINTER
Press the Pointer button to display...

E-26
Using the USB Mouse
Using the supplied USB mouse gives you a smooth operation. A com-
mercially available USB mouse can be also used.
NOTE: There may be some brands of USB mouse that the projector does not
support. The scroll button on the supplied USB mouse does not work with the
projector.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse cur-
sor...

E-27
Changing Background Logo
You can change the default background logo using the PC Card Files
feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMPare not available.
1. From the men u, select [Tools] 
→ [PC Card Files] to displa y a list of all
the files stored in the PC card so that y ou can select a file you want to
use as a bac kground logo .
2.The Logo b utton allows you to select a bac kground logo from g raphic
files on a PC card and change to it as the bac kground...

E-28
AC INRGB2 INRGB  OUT
AUDIO
AUDIODVI INUSB(MOUSE/HUB)R EM
OTE
AUDIO
AUDIO G/Y
B/Cb HV
RGB1 IN
S
-V
IDEO  INVID
EO  IN
AUDIO
AUDIO
AUDIO
L/MONORL/MONOR AUDIO OUT
L/MONO
R PC CONTROL
1
2
PC card (not supplied)
USING THE VIEWER
NOTE:
• To use the V iewer, first you need to cr eate presentation materials on your PC
using the Dynamic Image Utility 2.0 contained on the supplied  Projector
User Supportware CD-ROM. For installation, see the printed  Software
Utility Installation Guide. For creating...

E-29
Operating the Viewer Function from the
Projector (playback)
This section describes the operation for showing slides of presentation
documents created using the Viewer function with the projector. It is
also possible to make slides directly from the images projected with the
projector.
Projecting slides (Viewer)
1. Insert a PC card into the PC card slot.
Insert the PC card so that the end with the insertion direction arrow
on the top goes in first.
* Press the eject button to eject the card.
2....

E-30
NOTE: You can also use the  and  button on the remote control to select
folders or slides.
If you use the 
 and  button on the remote control for Viewer operation, pressthe PJ button to switch to the Projector mode and the PJ button lights red.
Lit red Works as the Select button on the
projector.
ENTERCANCEL
SELECT
PJ
Auto Play Mode
If the Auto Play option is selected in Viewer Options of the menu,
any given slide will start to play automatically.
You can also specify Auto Play Interval between...