Dukane Imagepro 8761 Portable Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8761 Portable Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
E-91 USING ON-SCREEN MENU Menu Descriptions & Functions Selecting Color Correction Adjusts red, green, blue, yellow, magenta, cyan and color gain each independently to correct the tint on whole screen. Selecting White Peaking Adjust the brightness of the white areas by using the slide bar. As the picture becomes dim, it looks more natural. Adjusting Color Temperature and White Balance This feature adjusts the color temperature using the slide bar. Checking Color Temperature enables the color...
Page 92
E-92 USING ON-SCREEN MENU Menu Descriptions & Functions Selecting Base Setting This feature allows you to use color correction or gamma values as reference data to optimize for various types of images. You can select one of the following five settings. • Presentation • Video • Movie • Graphic • sRGB Projector Options Using 3D Reform This feature corrects trapezoidal distortion so that the projected image is rectangular. Two options are available for correcting procedures. You can save adjustment...
Page 93
![Page 93
E-93
USING ON-SCREEN MENU Menu Descriptions & Functions
Menu
Allows you to set preferences for the on-screen menu. Press OK to
save your changes for all the features of Page 1 and Page 2.
[Page1]
Selecting Menu Language [Language]:
You can choose one of seven languages for on-screen instructions.
The options are: English, German, French, Italian, Spanish, Swed-
ish and Japanese.
Selecting Menu Mode [Menu Mode]:
This feature allows you to select 3 menu modes: Advanced Menu,
Custom Menu and Basic Menu....](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-92.png "Page 93
E-93
USING ON-SCREEN MENU Menu Descriptions & Functions
Menu
Allows you to set preferences for the on-screen menu. Press OK to
save your changes for all the features of Page 1 and Page 2.
[Page1]
Selecting Menu Language [Language]:
You can choose one of seven languages for on-screen instructions.
The options are: English, German, French, Italian, Spanish, Swed-
ish and Japanese.
Selecting Menu Mode [Menu Mode]:
This feature allows you to select 3 menu modes: Advanced Menu,
Custom Menu and Basic Menu....")
E-93 USING ON-SCREEN MENU Menu Descriptions & Functions Menu Allows you to set preferences for the on-screen menu. Press OK to save your changes for all the features of Page 1 and Page 2. [Page1] Selecting Menu Language [Language]: You can choose one of seven languages for on-screen instructions. The options are: English, German, French, Italian, Spanish, Swed- ish and Japanese. Selecting Menu Mode [Menu Mode]: This feature allows you to select 3 menu modes: Advanced Menu, Custom Menu and Basic Menu....
Page 94
![Page 94
E-94
USING ON-SCREEN MENU Menu Descriptions & Functions
Selecting a Mouse Pointer Icon [Mouse Pointer]:
This option enables you to select one of nine different mouse point-
ers when using a USB mouse.
Selecting Menu Display Time :
This option allows you to select how long the projector waits after
the last touch of a button to turn off the menu.
The preset choices are Manual, Auto 5 sec, Auto 15 sec, and
Auto 45 sec. The Auto 45 sec is the factory preset.
Manual ............ The menu can be turned off...](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-93.png "Page 94
E-94
USING ON-SCREEN MENU Menu Descriptions & Functions
Selecting a Mouse Pointer Icon [Mouse Pointer]:
This option enables you to select one of nine different mouse point-
ers when using a USB mouse.
Selecting Menu Display Time :
This option allows you to select how long the projector waits after
the last touch of a button to turn off the menu.
The preset choices are Manual, Auto 5 sec, Auto 15 sec, and
Auto 45 sec. The Auto 45 sec is the factory preset.
Manual ............ The menu can be turned off...")
E-94 USING ON-SCREEN MENU Menu Descriptions & Functions Selecting a Mouse Pointer Icon [Mouse Pointer]: This option enables you to select one of nine different mouse point- ers when using a USB mouse. Selecting Menu Display Time : This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are Manual, Auto 5 sec, Auto 15 sec, and Auto 45 sec. The Auto 45 sec is the factory preset. Manual ............ The menu can be turned off...
Page 95
![Page 95
E-95
USING ON-SCREEN MENU Menu Descriptions & Functions
Setup
Enables you to set operating options.
Press OK to save your changes for all the features of Page 1, Page 2,
Page 3, Page 4 and Page 5.
[Page 1]
Setting Lamp Mode to Normal or Eco [Lamp Mode]:
This feature enables you to select two brightness mode of the lamp:
Normal and Eco modes. The lamp life can be extended up to 3000
hours by using the Eco mode.
Normal Mode .. This is the default setting (100% Brightness).
Eco Mode ........ Select this...](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-94.png "Page 95
E-95
USING ON-SCREEN MENU Menu Descriptions & Functions
Setup
Enables you to set operating options.
Press OK to save your changes for all the features of Page 1, Page 2,
Page 3, Page 4 and Page 5.
[Page 1]
Setting Lamp Mode to Normal or Eco [Lamp Mode]:
This feature enables you to select two brightness mode of the lamp:
Normal and Eco modes. The lamp life can be extended up to 3000
hours by using the Eco mode.
Normal Mode .. This is the default setting (100% Brightness).
Eco Mode ........ Select this...")
E-95 USING ON-SCREEN MENU Menu Descriptions & Functions Setup Enables you to set operating options. Press OK to save your changes for all the features of Page 1, Page 2, Page 3, Page 4 and Page 5. [Page 1] Setting Lamp Mode to Normal or Eco [Lamp Mode]: This feature enables you to select two brightness mode of the lamp: Normal and Eco modes. The lamp life can be extended up to 3000 hours by using the Eco mode. Normal Mode .. This is the default setting (100% Brightness). Eco Mode ........ Select this...
Page 96
![Page 96
E-96
USING ON-SCREEN MENU Menu Descriptions & Functions
Setting RGB 1 or 2 for RGB OUT [RGBOUT Terminal]
This option allows you to determine which RGB source is output
from the RGBOUT connector during Idle mode.
Last ............ The signal from the last RGB input will be output to the
RGBOUT connector.
RGB 1 ........The signal from RGB IN1 will be output to the RGBOUT
connector.
RGB 2 ........The signal from RGB IN2 will be output to the RGBOUT
connector.
NOTE: The AUDIO OUT mini jack will not output...](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-95.png "Page 96
E-96
USING ON-SCREEN MENU Menu Descriptions & Functions
Setting RGB 1 or 2 for RGB OUT [RGBOUT Terminal]
This option allows you to determine which RGB source is output
from the RGBOUT connector during Idle mode.
Last ............ The signal from the last RGB input will be output to the
RGBOUT connector.
RGB 1 ........The signal from RGB IN1 will be output to the RGBOUT
connector.
RGB 2 ........The signal from RGB IN2 will be output to the RGBOUT
connector.
NOTE: The AUDIO OUT mini jack will not output...")
E-96 USING ON-SCREEN MENU Menu Descriptions & Functions Setting RGB 1 or 2 for RGB OUT [RGBOUT Terminal] This option allows you to determine which RGB source is output from the RGBOUT connector during Idle mode. Last ............ The signal from the last RGB input will be output to the RGBOUT connector. RGB 1 ........The signal from RGB IN1 will be output to the RGBOUT connector. RGB 2 ........The signal from RGB IN2 will be output to the RGBOUT connector. NOTE: The AUDIO OUT mini jack will not output...
Page 97
![Page 97
E-97
USING ON-SCREEN MENU Menu Descriptions & Functions
Auto Play Interval:
You can specify interval time between 5 and 300 seconds.
NOTE: The Auto Play Interval time set on “Slide Show Settings” of the
Dynamic Image Utility 2.0 overrides the one set here.
Manual Play:
Views a slide manually when the Viewer source is selected.
Selecting Capture Options [Capture Option]: (available for JPEG only)
These options are used for the Capture function that you can select
from Tools. You have three options for...](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-96.png "Page 97
E-97
USING ON-SCREEN MENU Menu Descriptions & Functions
Auto Play Interval:
You can specify interval time between 5 and 300 seconds.
NOTE: The Auto Play Interval time set on “Slide Show Settings” of the
Dynamic Image Utility 2.0 overrides the one set here.
Manual Play:
Views a slide manually when the Viewer source is selected.
Selecting Capture Options [Capture Option]: (available for JPEG only)
These options are used for the Capture function that you can select
from Tools. You have three options for...")
E-97 USING ON-SCREEN MENU Menu Descriptions & Functions Auto Play Interval: You can specify interval time between 5 and 300 seconds. NOTE: The Auto Play Interval time set on “Slide Show Settings” of the Dynamic Image Utility 2.0 overrides the one set here. Manual Play: Views a slide manually when the Viewer source is selected. Selecting Capture Options [Capture Option]: (available for JPEG only) These options are used for the Capture function that you can select from Tools. You have three options for...
Page 98
![Page 98
E-98
USING ON-SCREEN MENU Menu Descriptions & Functions
[Page 3]
Selecting Signal Format [Signal Select]
RGB1/2:
Allows you to choose RGB for an RGB source such as a com-
puter, or Component for a component video source such as a DVD
player. Normally select RGB/Component and the projector auto-
matically detects an either incoming signal. However there may be
some component signals that the projector is unable to detect. If
this is the case, select Component. Select Scart in RGB 1 for the
European...](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-97.png "Page 98
E-98
USING ON-SCREEN MENU Menu Descriptions & Functions
[Page 3]
Selecting Signal Format [Signal Select]
RGB1/2:
Allows you to choose RGB for an RGB source such as a com-
puter, or Component for a component video source such as a DVD
player. Normally select RGB/Component and the projector auto-
matically detects an either incoming signal. However there may be
some component signals that the projector is unable to detect. If
this is the case, select Component. Select Scart in RGB 1 for the
European...")
E-98 USING ON-SCREEN MENU Menu Descriptions & Functions [Page 3] Selecting Signal Format [Signal Select] RGB1/2: Allows you to choose RGB for an RGB source such as a com- puter, or Component for a component video source such as a DVD player. Normally select RGB/Component and the projector auto- matically detects an either incoming signal. However there may be some component signals that the projector is unable to detect. If this is the case, select Component. Select Scart in RGB 1 for the European...
Page 99
![Page 99
E-99
USING ON-SCREEN MENU Menu Descriptions & Functions
Enabling Auto Start [Auto Start]:
Turns the projector on automatically when the power cable is in-
ser ted into an active power outlet and the main power switch is
turned on. This eliminates the need to always use the Power but-
ton on the remote control or projector cabinet.
Enabling Power Management [Power Management]:
When this option is on and there is no input for five minutes or more,
the projector will automatically turn itself off....](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-98.png "Page 99
E-99
USING ON-SCREEN MENU Menu Descriptions & Functions
Enabling Auto Start [Auto Start]:
Turns the projector on automatically when the power cable is in-
ser ted into an active power outlet and the main power switch is
turned on. This eliminates the need to always use the Power but-
ton on the remote control or projector cabinet.
Enabling Power Management [Power Management]:
When this option is on and there is no input for five minutes or more,
the projector will automatically turn itself off....")
E-99 USING ON-SCREEN MENU Menu Descriptions & Functions Enabling Auto Start [Auto Start]: Turns the projector on automatically when the power cable is in- ser ted into an active power outlet and the main power switch is turned on. This eliminates the need to always use the Power but- ton on the remote control or projector cabinet. Enabling Power Management [Power Management]: When this option is on and there is no input for five minutes or more, the projector will automatically turn itself off....
Page 100
![Page 100
E-100
USING ON-SCREEN MENU Menu Descriptions & Functions
Enabling Idle Mode [Idle Mode]:
The projector has two standby modes: Standby and Idle.
Standby is the mode that allows you to put the projector in the standby
condition which consumes less power than the idle mode. The pro-
jector is preset for Standby at the factory.
When this check box is turned on, you allow the RGB OUT connec-
tor to output RGB signal during Idle mode.
NOTE:
*
The RGB OUT connector will not output signal during the Standby...](http://img.usermanuals.tech/thumb/5762/88555/w300_dukane-imagepro-8761-manual_d-99.png "Page 100
E-100
USING ON-SCREEN MENU Menu Descriptions & Functions
Enabling Idle Mode [Idle Mode]:
The projector has two standby modes: Standby and Idle.
Standby is the mode that allows you to put the projector in the standby
condition which consumes less power than the idle mode. The pro-
jector is preset for Standby at the factory.
When this check box is turned on, you allow the RGB OUT connec-
tor to output RGB signal during Idle mode.
NOTE:
*
The RGB OUT connector will not output signal during the Standby...")
E-100 USING ON-SCREEN MENU Menu Descriptions & Functions Enabling Idle Mode [Idle Mode]: The projector has two standby modes: Standby and Idle. Standby is the mode that allows you to put the projector in the standby condition which consumes less power than the idle mode. The pro- jector is preset for Standby at the factory. When this check box is turned on, you allow the RGB OUT connec- tor to output RGB signal during Idle mode. NOTE: * The RGB OUT connector will not output signal during the Standby...