Dukane Imagepro 8761 Portable Projector Users Manual

E-111 Client-identifier option
Select whether or not to add option client identifier for DHCP.
None ......................... Not add
Request ..................... Add at the time of DHCP_REQUEST.
Discover/Request ......Add at the time of DHCP_DISCOVER and
DHCP_REQUEST.
Use MAC address
Turn on to use MAC address for Client-identifier.
Client-identifier
Type in a client identifier.
USING ON-SCREEN MENU 
 Menu Descriptions & Functions 

E-112
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
Setting a Password
A password can be set for your projector to avoid operation by an unau-
thorized person.
There are two password options: one for menu and the other for logo.
When a password is set, doing any one of the following four operations will
display the Password input screen.
For Menu:
*Changing the menu to Advanced
*Editing the custom menu
For Logo:
*Changing the background
*Changing the logo data in PC Card Files
Procedures for...

E-113
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
Delete
To delete your password:
1. Highlight [Delete] and press the ENTER button. The Current Password screen will
be displayed.
2. Use the Software keyboard to type your password. Highlight OK on the “Current
Password” screen and then press the ENTER button.
Your password will be deleted.
In case you forget your password, follow the steps below to delete it.
1. Select the Advanced menu from the Basic menu. The Password entry screen will be...

E-114
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
Security
The Security function enables you to protect your projector so that the
projector will not project a signal unless you enter a keyword. There is also
an option to lock the projector by using a registered PC card as a protect
key. Once you have registered your PC card as a protect key, you are
required to insert the registered PC card into the PC card slot of the pro-
jector each time you turn on the projector. You can enable the...

E-115
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
To set up a keyword to enable the Security function without using a regis-
tered PC card
1. Use the SELECT 
 button to select “Keyword” and use the software
keyboard to enter a keyword.
NOTE: Please make a note of your keyword.
2. Use the SELECT 
 button to select “Enable” and use the SELECT

 button to select “OK”, then the Security function will be enabled. An
“Are you sure?” message will appear. Use the SELECT  button and
press the ENTER...

E-116
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
To  turn on the projector when Security is enabled (when using your key-
w ord only)
1. Press and hold the POWER button for a minimum of two seconds. The projector will be turned on and display a message to the effect that
the projector is security-protected.
2. Select [Projector Options]  → [Security] from the menu and press the EN-
TER button.
The Release Code input screen will be displayed.
3. Enter your keyword in the Release Code input...

E-117
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
To delete PC card data you registered
1. Use the SELECT  
 button to select Delete and use the SELECT  
b utton to select the list window.
2. Use the SELECT  
 button to select the PC card data you wish to de-
lete.
3. Press the SELECT    b utton to select Delete and press the ENTER
b utton.
The PC card data will be deleted.
If youve lost your registered PC card, proceed as follows:
N O TE:  Dukane  or your dealer will p ro vide you with your...

E-118
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
Tools
Provides tools for setting sleep timer, capturing images, displaying files or
changing your background logo in a PC Card and drawing.
NOTE: The Capture and PC Card Files features are required for a PC card.
Using Sleep Timer
1. Select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00,
2:00, 4:00, 8:00, 12:00, 16:00.
2. Select “Set” and press the ENTER button on the remote control.
3. The remaining time starts counting...

E-119
USING ON-SCREEN MENU 
 Menu Descriptions & Functions
[Page 1]
Source Name
Input Terminal
Entry No.
Horizontal Frequency
Vertical Frequency
Sync Polarity[Page 2]
Signal Type
Video Type
Sync Type
Interlace[Page 3]
Remaining Lamp Time (%)
Lamp Hour Meter (H)
Projector Usage (H) Changing Background Logo:
You can change the default background logo using the PC Card Files
feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and
BMP are not available. See page E-59.
Using...

E-120
NOTE: The progress indicator shows the percentage of remaining bulb life. The
value informs you of the amount of lamp and projector usage respectively.
Remaining Lamp Time Display:
When the remaining lamp time reaches 0, the Remaining Lamp Time
bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn
on regardless of whether the lamp mode is set to Normal or Eco.
Returning to Factory Default
The Factory Default...