Dukane Imagepro 8755n Projector Users Manual

71
NETWORK menu
ItemDescription
WIRELESS 
INFORMATION "Selecting this item displays the WIRELESS_INFORMATION dialog 
for viewing the wireless LAN settings." Use the ▲/▼ buttons to 
switch the page.
The first page shows the wireless LAN settings. The second and 
subsequent pages display the signal information of wireless LAN 
connection devices.
• For details of PASSCODE, refer to the manual for “LiveViewer”
. 
• Nothing (blank) is shown in the PROJECTOR NAME  (
74)
 and 
SSID  (70)
 field until...

72
NETWORK menu
ItemDescription
WIRED SETUP Selecting this item displays the WIRED 
SETUP menu for the wired LAN.
Use the ▲/▼ buttons to select an item, 
and the ► or ENTER button on the remote 
control to perform the item.
DHCP  
(Dynamic Host  Configuration  Protocol) Use the ▲/▼ buttons to turn DHCP on/off.
ON  ó OFF
Select OFF when the network does not have 
DHCP enabled. To save the setting, press the ► 
button.
• When the “DHCP” setting changes to “ON”, it 
takes a little time to obtain IP address...

73
NETWORK menu
ItemDescription
WIRED SETUP (continued) TIME 
DIFFERENCE Use the ▲/▼ buttons to enter the TIME 
DIFFERENCE. 
Set the same TIME DIFFERENCE as the one 
set on your computer. If unsure, consult your IT 
manager. 
Use the ► button to return to the menu after 
setting the TIME DIFFERENCE.
• When this item is set, the same item in the 
WIRELESS SETUP menu is overwritten with the 
same setting (

68).
DATE AND  TIME Use the ▲/▼/◄/► buttons to enter the Year (last 
two digits), Month, Date, Hour...

74
NETWORK menu
ItemDescription
PROJECTOR  NAME (1)  
Use the ▲/▼ buttons on the 
NETWORK menu to select the 
PROJECTOR NAME and press 
the ► button. The PROJECTOR 
NAME dialog will be displayed.
(2)    The current PROJECTOR NAME will be displayed on the first 3 
lines. Particular projector name is pre-assigned by default.
Use the ▲/▼/◄/► buttons and the  ENTER or INPUT button to 
select and enter characters.
To erase 1 character at one time, press the  RESET button or 
press the ◄ and INPUT button at...

75
NETWORK menu
ItemDescription
MY IMAGE Selecting this item displays the MY 
IMAGE menu. 
Use the application to transfer the im-
age data. It can be downloaded from 
the Hitachi web site.
Use the ▲/▼ buttons to select an item which is a still image by the 
MY IMAGE (My Image Function in the Network Guide) and the ► 
or ENTER button to display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed 
Use...

76
NETWORK menu
ItemDescription
PRESENTATION Selecting this item displays the PRESENTATION menu.
Use ▲/▼ buttons to select one of the following items, then press ► 
or ENTER button to use the function.
• To use Network Presentation, an exclusive application, "LiveViewer" 
is required. It can be installed from the bundled application CD. 
You can also download the latest version and relevant information 
from the Hitachi website (http://www.hitachi-america.us/digitalmedia 
or...

77
NETWORK menu
ItemDescription
PRESENTATION (continued) MULTI PC 
MODE
(continued) • To change from Single PC mode to Multi PC mode, 
press ► button to choose OK in the dialog and press 
the ENTER or INPUT button.
The display mode is changed.
• 
For details on how to switch the 
display mode to Multi PC mode 
on your computer, refer to the 
manual for 
“LiveViewer”.• The Presenter mode setting of the selected 
computer becomes valid when the display mode is 
changed to Single PC mode.  
Also, the...

78
SECURITY menu
(continued on next page) This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter to the SECURITY menu
1.  Press the ► button. The ENTER PASSWORD box will be displayed.  
2. 
 Use the ▲/▼/◄/► buttons to enter the registered password. 
    The factory default password is as follows.
  
               
    This password can be...

79
SECURITY menu
ItemDescription
MyScreen 
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
1 Turning on the MyScreen PASSWORD1-1   Use the ▲/▼ buttons on the SECURITY menu to 
select MyScreen PASSWORD and press the ► 
button to display the MyScreen PASSWORD on/
off menu.
1-2   Use the ▲/▼ buttons on the MyScreen 
PASSWORD on/off menu to select ON. 
The ENTER NEW PASSWORD box...

80
SECURITY menu
ItemDescription
PIN LOCK
PIN LOCK is a function which prevents the projector from being used unless 
a registered Code is input.
1 Turning on the PIN LOCK1-1   Use the ▲/▼ buttons on the SECURITY menu to 
select PIN LOCK and press the ► button or the 
ENTER button to display the PIN LOCK on/off 
menu.
1-2   Use the ▲/▼ buttons on the PIN LOCK on/
off menu to select ON and the Enter PIN 
Code box will be displayed. 
1-3   Input a 4 part PIN code using the ▲/▼/◄/►, 
COMPUTER or INPUT...