Dukane Imagepro 8755e-Rj Portable Lcd Projector Users Manual

							
15

Settings
Alert Settings (Continued)
ItemDescription
Filter Time AlarmConfigures Filter Time Alarm alert settings.
Alarm TimeConfigures the filter time to alert.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters.
“CHANGE THE LAMP” is displayedConfigures alert settings for when “CHANGE THE LAMP” is displayed.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters.
Cold StartConfigures Cold Start alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Authentication FailureConfigures Authentication Failure alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Click the [Apply] button to save the settings.
Transition Detector AlarmConfigures Transition Detector Alarm alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024 alphanumeric characters. 
						

							
16

Settings
Schedule Settings
Displays and configures schedule settings.
ItemDescription
DailyConfigures the daily schedule.
ScheduleClick the [Enable] check box to enable daily scheduling.
Schedule ListDisplays the current daily schedule.
SundayConfigures the Sunday schedule.
ScheduleClick the [Enable] check box to enable Sunday scheduling.
Schedule ListDisplays the current Sunday schedule.
MondayConfigures the Monday schedule.
ScheduleClick the [Enable] check box to enable Monday scheduling.
Schedule ListDisplays the current Monday schedule.
TuesdayConfigures the Tuesday schedule.
ScheduleClick the [Enable] check box to enable Tuesday scheduling.
Schedule ListDisplays the current Tuesday schedule.
WednesdayConfigures the Wednesday schedule.
ScheduleClick the [Enable] check box to enable Wednesday scheduling.
Schedule ListDisplays the current Wednesday schedule.
ThursdayConfigures the Thursday schedule.
ScheduleClick the [Enable] check box to enable Thursday scheduling.
Schedule ListDisplays the current Thursday schedule.
FridayConfigures the Friday schedule.
ScheduleClick the [Enable] check box to enable Friday scheduling.
Schedule ListDisplays the current Friday schedule.
SaturdayConfigures the Saturday schedule.
ScheduleClick the [Enable] check box to enable Saturday scheduling.
Schedule ListDisplays the current Saturday schedule. 
						

							
7

Settings
Schedule Setting (Continued)
ItemDescription
Specific date No1Configures the specific date (No.1) schedule.
ScheduleClick the [Enable] check box to enable specific date (No.1) scheduling.
Month/DayConfigures the Month and date.
Schedule ListDisplays the current specific date (No.1) schedule.
Specific date No.2Configures the specific date (No.2) schedule.
Click the [Apply] button to save the settings.
ScheduleClick the [Enable] check box to enable specific date (No.2) scheduling.
Month/DayConfigures the Month and date.
Schedule ListDisplays the current specific date (No.2) schedule.
Specific date No.3Configures the specific date (No.3) schedule.
ScheduleClick the [Enable] check box to enable specific date (No.3) scheduling.
Month/DayConfigures the Month and date.
Schedule ListDisplays the current specific date (No.3) schedule.
Specific date No.4Configures the specific date (No.4) schedule.
ScheduleClick the [Enable] check box to enable specific date (No.4) scheduling.
Month/DayConfigures the Month and date.
Schedule ListDisplays the current specific date (No.4) schedule.
Specific date No.5Configures the specific date (No.5) schedule.
ScheduleClick the [Enable] check box to enable specific date (No.5) scheduling.
Month/DaySet the Month and date.
Schedule ListDisplays the current specific date (No.5) schedule. 
						

							
8

Settings
To add additional functions and events click the [Add] button and set the following 
items.
ItemDescription
TimeConfigures the time to execute commands.
CommandConfigures the commands to be executed.
Power ParameterConfigures the parameters for power control.
Input Source ParameterConfigures the parameters for input switching.
Display Image ParameterConfigures the parameters for display of transfer image data.
Click the [Register] button to add new commands to the Schedule List.
Click the [Delete] button to delete commands from the Schedule list.
Date/Time Settings
Displays and configures the date and time settings.
ItemDescription
Current DateConfigures the current date in Year/Month/Day format.
Current TimeConfigures the current time in Hour:Minute:Second format.
Schedule Setting (Continued) 
						

							
19

Settings
Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
ItemDescription
Daylight Savings TimeClick the [ON] check box to enable daylight savings time and set the following items.
SNTP Server IP AddressConfigures the SNTP server address in IP format.
CycleConfigures the interval at which to retrieve Date and Time information from the SNTP server. (hours:minutes).
StartConfigures the date and time daylight savings time begins.
MonthConfigures the month daylight savings time begins (1~12).
WeekConfigures the week of the month daylight savings time begins (First, 2, 3, 4, Last).
DayConfigures the day of the week daylight savings time begins (Sun, Mon, Tue, Wed, Thu, Fri, Sat).
HourConfigures the hour daylight savings time begins (0 ~ 23).
MinuteConfigures the minute daylight savings time begins (0 ~ 59).
EndConfigures the date and time daylight savings time ends.
MonthConfigures the month daylight savings time ends (1 ~ 12).
WeekConfigures the week of the month daylight savings time ends (First, 2, 3, 4, Last).
DayConfigures the day of the week daylight savings time ends (Sun, Mon, Tue, Wed, Thu, Fri, Sat).
HourConfigures the hour daylight savings time ends (0 ~ 23).
MinuteConfigures the minute daylight savings time ends  (0 ~ 59).
Time differenceConfigures the time difference (hours:minutes).Set the same time difference as the one set on your PC. If unsure, consult your network administrator.
SNTPClick the [ON] check box to retrieve Date and Time information from the SNTP server and set the following items.
• The new configuration settings are activated after restarting the network connection. 
The network connection must be restarted when the configuration settings ar e changed, The 
network connection can be restarted using [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a netw\
ork 
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the Timeserver 
and override time settings when SNTP is enabled.
• The Internal Clock’s time may not remain accurate. Using SNTP is 
recommended to maintain accurate time.
NOTE 
						

							
20

Settings
Security Settings
ItemDescription
Administrator authorityConfigures the Administrator ID and Password.
Administrator IDConfigures the Administrator ID.The length of the text can be up to 32 alphanumeric characters.
Administrator Password
Configures the Administrator Password.The length of the text can be up to 255 alphanumeric characters.
Re-enter Administrator PasswordRe-enter the above password for verification.
Displays and configures passwords and other security settings.
User authorityConfigures the User ID and Password.
User IDConfigures the User ID.The length of the text can be up to 32 alphanumeric characters.
User PasswordConfigures the User Password.The length of the text can be up to 255 alphanumeric characters.
Re-enter User PasswordUsed to re-enter the above password for verification. 
						

							


Click the [Apply] button to save the settings.
Authentication Password
Configures the Authentication Password.The length of the text can be up to 16 alphanumeric characters.
Re-enter Authentication PasswordUsed to re-enter the above password for verification.
SNMPConfigures the community name if SNMP is used.
Community NameConfigures the community name.The length of the text can be up to 64 alphanumeric characters.
• The new configuration settings are activated after restarting the 
network connection. The network connection must be restarted when the 
configuration settings are changed. The network connection can be restarted 
using [Network Restart] on the main menu.
NOTE
ItemDescription
Network ControlConfigures the Authentication Password for the command control.
Settings
Security Settings (Continued) 
						

							


Projector Control
Projector Control
Projector Control
The items shown in the table below can be 
performed using the [Projector Control] menu.
Select an item using the up and down arrow keys 
on the PC.
Most of the items have a submenu.
Refer to the table below for details.
Controls the projector.
ItemDescription
Main
PowerTurns the power On/Off.
Input SourceSelects the input source.
Picture ModeSelects the Picture Mode setting.
Blank On/OffTurns Blank On/Off.
MuteTurns Mute On/Off.
FreezeSelects the Freeze setting.
MagnifyControls the Magnify setting.
Picture
BrightnessAdjusts the Brightness setting.
ContrastAdjusts the Contrast setting.
GammaSelects the Gamma setting.
Color TempSelects the Color Temp setting.
ColorAdjusts the Color setting.
TintAdjusts the Tint setting.
SharpnessAdjusts the Sharpness setting.
MyMemory RecallRecalls the MyMemory data.
MyMemory SaveSaves the MyMemory data. 
						

							
23

Projector Control
Projector Control (Continued)
ItemDescription
Image
AspectSelects the Aspect setting.
Over ScanSelects the Over Scan setting.
V PositionAdjusts the V Position.
H PositionAdjusts the H Position.
H PhaseAdjusts the H Phase.
H SizeAdjusts the H Size.
Auto AdjustPerforms Auto Adjustment.
Input
ProgressiveSelects the progressive setting.
Video NRSelects the Video NR setting.
Color SpaceSelects the Color Space.
ComponentSelects the Component terminal setting.
C-Video FormatSelects the Video Format setting.
S-Video FormatSelects the S-Video Format setting.
Frame LockEnables/Disables Frame Lock.
RGB in-1Selects the RGB   input signal type.
RGB in-2Selects the RGB   input signal type.
Setup
Aoto Keystone ExecutePerforms the Automatic keystone distortion correction.
KeystoneAdjusts the Keystone setting.
WhisperSelects the Fan speed. (Normal or Whisper)
MirrorSelects the Mirror status.
VolumeAdjusts the Volume setting.
Audio-RGB1Assigns the Audio-RGB1 input terminal.
Audio-RGB2Assigns the Audio-RGB2 input terminal.
Audio-VideoAssigns the Audio-Video input terminal.
Audio-S-VideoAssigns the Audio-S-Video input terminal.
Audio-ComponentAssigns the Audio-Component input terminal. 
						

							
4

Option
LanguageSelects the Language for the OSD.
Menu Position VAdjusts the vertical Menu Position.
Menu Position HAdjusts the horizontal Menu Position.
BlankSelects the Blank mode.
StartupSelects the Startup screen mode.
MyScreen LockTurns MyScreen Lock On/Off.
MessageTurns the Message function On/Off.
Auto SearchTurns the Automatic signal search function On/Off.
Auto KeystoneTurns the Automatic keystone distortion correction function On/Off.
Auto onTurns the Auto on function On/Off.
Auto offConfigures the timer to shut off the projector when no signal is detected.
My Button-1Assigns the functions for the MY BUTTON1 buttons on the included remote control.
My Button-2Assigns the functions for the MY BUTTON2 buttons on the included remote control.
Auto AdjustEnables/Disables Auto Adjustment.
Remote Freq. NormalEnable/Disable
Remote Freq. HighEnable/Disable
Projector Control
Projector Control (Continued)
ItemDescription
Screen