Dukane Imagepro 8755e-Rj Portable Lcd Projector Users Manual

25

Projector Control
Network Restart
Restarts the projector’s network connection.
ItemDescription
RestartRestarts the projector’s network connection in order to activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser.
NOTE
Logoff
When logoff is clicked, the logon screen is displayed (6 : Fig.   ).
Projector Status
Displays and configures the current projector status.
ItemDescription
Error StatusDisplays...

26

Failure & Warning Alerts via E-mail
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specified e-mail addresses when 
the projector requires maintenance or has encountered an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses 
power.
NOTE
Mail Settings(10)
To use the projector’s e-mail function please configure the following items via a 
web browser.
Example: If the IP address of...



Failure & Warning Alerts via E-mail
 8)  Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] 
on the main menu.
 9) 
 
Select and configure each alert item. Refer to 
[Alert Settings] in [Configuring 
and Controlling the Projector via a Web Browser] for further information.
10) Click the [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line
  :    
Text 
  : 
 
  Date   
 
Time   
 
IP Address   
 
MAC Address   
Mail...



Projector management via SNMP
Projector management via SNMP
When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a 
specified PC.
• It is recommended that SNMP functions be carried out by a network 
administrator. 
• SNMP management software must be installed on the computer to monitor 
the projector via SNMP.
NOTE
SNMP settings
Configure the following items via a web browser to use SNMP.
Example: If the IP address of the projector is set to 192.168.1.10:
• A Network...

29

Controlling the Projector via Scheduling
Controlling the Projector via Scheduling
The projector can be automatically controlled via scheduling.
• You can schedule the following control events: Power ON/OFF, Input 
Source and Transferred Image Display. 
• There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific date.
• The priority for scheduled events is as follows 1) specific date 2) day of the 
week 3) daily.
• Up to five specific dates are available for scheduled events. Priority...

30

Controlling the Projector via Scheduling
Date/Time Settings
The Date/Time setting can be adjusted via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
• A Network Restart is required after the Daylight Savings Time or 
SNTP configuration settings have been changed.
• The battery for the built in clock may be dead if the clock loses time e\
ven 
when the DATE and TIME have been set correctly. Replace the battery by 
following the instructions on replacing the...

31

Controlling the Projector via Scheduling
Schedule Settings
Schedule settings can be configured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
(16)
There are three types of scheduling.
 1) Daily: Perform the specified operation at a specified time every day.
 2)   Sunday ~ Saturday: Perform the specified operation at the specified time on a 
specified day of the week.
 3) Specific Date: Perform the specified operation on the specified date and time.
• In...

32

e-Shot (Still Image Transfer) Display
e-Shot (Still Image Transfer) Display
The projector can display a still image that is transferred via the netw\
ork.
Communication Port
The following port is used for e-Shot.
     TCP #9716
(9)
e-Shot (Still Image Transfer) Settings
Configure the following items from a web browser when e-Shot is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• e-Shot is not available via communication ports which are used for 
the command control (TCP...

33

e-Shot (Still Image Transfer) Display
e-Shot (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are r\
equired.
 6) Click [Security Settings] on the main menu.
 

) 
 
Select 
[Network Control] and enter the desired authentication password. * 
see Note

 
 

) Click the 
[Apply]  button to save the settings. * see Note 
• The Authentication Password will be the same for [Network Control 
Port1 (Port: 23)], [Network...

34

Command Control via the Network
Command Control via the Network
You can configure and control the projector via the network using RS-232C 
commands.
Communication Port
The following two ports are assigned for the command control.
     TCP #23
     TCP #9715
Command Control Settings
Configure the following items from a web browser when command control is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• Command control is not available via communication port (TCP 
#9716)...