Dukane Imagepro 8755e-Rj Portable Lcd Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8755e-Rj Portable Lcd Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
5
Network Functions
When configuring or controlling the projector via a web browser, an ID and
password are required. There are two types of IDs, Administrator IDs and User
IDs. The following chart describes the differences between user and administrator
IDs.
Below are the factory default settings for administrator IDs, user IDs a\
nd
passwords.
ItemDescriptionAdministrator IDUser ID
Network InformationDisplays the projector’s current network configuration settings.√√
Network SettingsDisplays and...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-90.png "Page 91
5
Network Functions
When configuring or controlling the projector via a web browser, an ID and
password are required. There are two types of IDs, Administrator IDs and User
IDs. The following chart describes the differences between user and administrator
IDs.
Below are the factory default settings for administrator IDs, user IDs a\
nd
passwords.
ItemDescriptionAdministrator IDUser ID
Network InformationDisplays the projector’s current network configuration settings.√√
Network SettingsDisplays and...")
5 Network Functions When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the differences between user and administrator IDs. Below are the factory default settings for administrator IDs, user IDs a\ nd passwords. ItemDescriptionAdministrator IDUser ID Network InformationDisplays the projector’s current network configuration settings.√√ Network SettingsDisplays and...
Page 92
![Page 92
6
Settings
Settings
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. will be displayed.
)
Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3)
Click the desired operation or configuration item on the...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-91.png "Page 92
6
Settings
Settings
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. will be displayed.
)
Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3)
Click the desired operation or configuration item on the...")
6 Settings Settings Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: ) Enter [https://192.168.1.10] into the address bar of the web browser and the screen in Fig. will be displayed. ) Enter your ID and password and click [Logon]. If the logon is successful either the Fig.2 or Fig.3 screen will be displayed. 3) Click the desired operation or configuration item on the...
Page 93
7 Settings Network Information All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector’s current network configuration settings. ItemDescription DHCPDisplays the DHCP configuration settings. IP AddressDisplays the current IP address. Subnet MaskDisplays the Subnet Mask. Default GatewayDisplays the Default Gateway. MAC...
Page 94
![Page 94
8
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses....](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-93.png "Page 94
8
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses....")
8 Settings Network Settings Displays and configures network settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a netw\ ork administrator before setting server addresses....
Page 95
![Page 95
9
Settings
Port Settings
Displays and configures communication port settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
ItemDescription
Network Control Port1 (Port:23)Configures command control port 1 (Port:23).
Port openClick the...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-94.png "Page 95
9
Settings
Port Settings
Displays and configures communication port settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
ItemDescription
Network Control Port1 (Port:23)Configures command control port 1 (Port:23).
Port openClick the...")
9 Settings Port Settings Displays and configures communication port settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.dresses. NOTE ItemDescription Network Control Port1 (Port:23)Configures command control port 1 (Port:23). Port openClick the...
Page 96
![Page 96
10
Settings
Mail Settings
Displays and configures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses.
NOTE
ItemDescription
Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings].
SMTP...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-95.png "Page 96
10
Settings
Mail Settings
Displays and configures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a netw\
ork
administrator before setting server addresses.
NOTE
ItemDescription
Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings].
SMTP...")
10 Settings Mail Settings Displays and configures e-mail addressing settings. Click the [Apply] button to save the settings. • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a netw\ ork administrator before setting server addresses. NOTE ItemDescription Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings]. SMTP...
Page 97
![Page 97
Settings
Alert Settings
Displays and configures failure & warning alerts.
ItemDescription
Cover ErrorConfigures Cover Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-96.png "Page 97
Settings
Alert Settings
Displays and configures failure & warning alerts.
ItemDescription
Cover ErrorConfigures Cover Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The...")
Settings Alert Settings Displays and configures failure & warning alerts. ItemDescription Cover ErrorConfigures Cover Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The...
Page 98
![Page 98
Settings
Alert Settings (Continued)
ItemDescription
Lamp ErrorConfigures Lamp Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-97.png "Page 98
Settings
Alert Settings (Continued)
ItemDescription
Lamp ErrorConfigures Lamp Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...")
Settings Alert Settings (Continued) ItemDescription Lamp ErrorConfigures Lamp Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...
Page 99
![Page 99
13
Settings
Alert Settings (Continued)
ItemDescription
Lamp Time ErrorConfigures Lamp Time Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-98.png "Page 99
13
Settings
Alert Settings (Continued)
ItemDescription
Lamp Time ErrorConfigures Lamp Time Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...")
13 Settings Alert Settings (Continued) ItemDescription Lamp Time ErrorConfigures Lamp Time Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...
Page 100
![Page 100
4
Settings
Alert Settings (Continued)
ItemDescription
Other ErrorConfigures Other Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...](http://img.usermanuals.tech/thumb/5762/88527/w300_dukane-imagepro-8755e-rj-manual_d-99.png "Page 100
4
Settings
Alert Settings (Continued)
ItemDescription
Other ErrorConfigures Other Error alert settings.
SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this item.
Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters.
Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...")
4 Settings Alert Settings (Continued) ItemDescription Other ErrorConfigures Other Error alert settings. SNMP TrapClick the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail SubjectConfigures the subject line of the e-mail to be sent.The length of the subject line can be up to 255 alphanumeric characters. Mail TextConfigures the text of the e-mail to be sent.The length of the text can be up to 1024...