Dolmar Lawn Mower TM-92.14 TM-92.14 H TM-92.14 H2 Instructions Manual

6.4.4 Replacing a fuse
The machine is fitted with fuses (1) with
different capacities and functions. Specifi-
cally:
– 10 A fuse = protects the main and
power circuits of the electronic circuit
board. When it blows, the machine
stops and the dashboard light switches
off.
– 25 A fuse = protects the battery charger
circuit. When it blows, the battery grad-
ually runs out and the machine will have
problems starting.
The fuse capacity is indicated on the fuse.
A blown fuse must
always be replaced by one of...

36ENMAINTENANCE
6.5 INFORMATION FOR SERVICE CENTRES
Below is a list of specifications for machine adjustments and instructions for disman-
tling and replacing the blades.
These operations must be carried out by a specialized Centre
only. Remove the ignition key before doing any adjustments or maintenance.
6.5.1 Adjustments
!WARNING!
a) Brake:
➤Mechanical
transmission:
➤Hydrostatic
transmission:
b) Drive:
➤Mechanical
transmission:
➤Hydrostatic
transmission:
c) Blade engagement:
Element...

37ENMAINTENANCE
6.5.2 Dismantling, replacing and remounting the blades
Always wear work
gloves when handling the blades.
Damaged or bent
blades must always be replaced;
never try to repair them! ALWAYS USE
ORIGINAL BLADES BEARING THE
SYMBOL   ! Make sure the blades
are correctly balanced. The blades are
different and rotate in different direc-
tions, so make sure you put them
back in the right place by referring to
the code stamped on the outside of
each blade. 
1. Dismantling
1a= screw with right thread...

38ENTROUBLESHOOTING
1.When the key isturned to “RUN”, theindicator light or thecontrol panel remainswitched off
2.With the key on«START» the lightflashes and thestarter motor doesnot run
3.With the key isturned to “START”the light or the con-trol panel come on,but the starter motoris not activated
4.With the key on«START»,  the startermotor runs but theengine does not start
5.Starting is difficultor the engine runserratically
6.Poor engine per-formance during cut-ting
The safety device of the electronic...

39ENTROUBLESHOOTING
PROBLEM LIKELY CAUSE SOLUTION
7.The motor shutsdown whilst working
8.The blades do notengage  
9.Uneven cut andpoor grass collection
10.Unusual vibra-tions while working
11.With the enginerunning, the machinedoes not move whenthe drive pedal ispressed  ( forhydrostatic drivemodels)
➤
The safety device of the electronic cir-cuit board has cut in due to:
– battery contains electrolyte but is notcharged
– the safety devices have cut in
– problems with engagement mecha-nism
– cutting deck...

40ENACCESSORIES ON REQUEST
1. FRONT COUNTERWEIGHTS
These improve stability at the front of the machine,
particularly when it is used mostly on sloping ground. 
2. STONE-GUARD KIT
Used instead of the grass-catcher when the cuttings
are not collected.
3. TOWING HITCH
For towing a small trailer.
4. CLOTH COVER
Protects the machine from dust when not in use.
5. CB01 MAINTENANCE BATTERY-CHARGER
This keeps the battery in good working order when
the machine is in storage, guaranteeing an optimum
level of charge...

41ENSPECIFICATIONS
Forward speed (approximate) at
3000 min-1:
in 1st  ................................... 2.2 km/h
in 2nd  ................................. 3.8 km/h
in 3rd  ................................... 5.8 km/h
in 4th  ................................... 6.4 km/h
in 5th  ................................... 9.7 km/h
in Reverse  ........................... 2.8 km/h
Forward speed  (at 3000 min-1):
in Forward gear   .. from 0 to 8.8 km/h
in Reverse   .......... from 0 to 3.8 km/h
➤Hydrostatic...

Gentile Cliente,
vogliamo anzitutto ringraziarla per la preferenza accordata ai nostri prodotti e ci augu-
riamo che l’uso di questa sua nuova macchina rasaerba le riservi gran\
di soddisfazioni
e risponda appieno alle sue aspettative.
Questo manuale è stato redatto per consentirle di conoscere bene la sua macchina e
di usarla in condizioni di sicurezza ed efficienza; non dimentichi che esso è parte inte-
grante della macchina stessa, lo tenga a portata di mano per consultarlo\
 in ogni
momento e lo...

INDICE
1. NORME DI SICUREZZA........................................................................\
.................. 3
Contiene le norme per usare la macchina in sicurezza
2.  IDENTIFICAZIONE DELLA MACCHINA E DEI COMPONENTI............................. 7
Spiega come identificare la macchina e gli elementi principali
che la compongono
3. SBALLAGGIO E MONTAGGIO........................................................................\
........ 9
Spiega come rimuovere l’imballo e completare il montaggio...