Digital Projection Thunder 10000sx User Manual

THUNDER 10000sx
Super High Brightness Digital Video Projector
User Manual 

E – ii
CAUTION: To turn off the main power, be sure to remove the plug
from power outlet. The power outlet socket should be installed as
near to the equipment as possible, and should be easily accessible.
3. GSGV Acoustic Noise Information Ordinance:
The sound pressure level is less than 70 dB(A) according to ISO 3744
or ISO 7779.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEP-
TACLE OR OTHER...

E – iii
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents are unob-
structed to prevent potentially dangerous concentrations of ozone
and the build-up of heat inside your projector. Allow at least 8 inches
(20cm) of space between your projector and a wall. Allow at least 20
inches (50 cm) of space between the ventilation outlet and object.
2. Prevent foreign objects such as paper clips and bits of paper from
falling into your projector. Do not attempt to retrieve...

E – iv
Précautions contre lincendie ou la décharge
1. Sassurer quil y ait une ventilation suffisante et que les ouvertures
ne soient pas obstruées afin déviter des concentrations
potentiellement dangereuses dozone et laccumulation de chaleur à
lintérieur du projecteur. Laisser au moins 20 cm despace entre le
projecteur et un mur. Veuillez laisser un espace libre d’au moins 50
cm (20 pouces) entre les orifices de ventilation et l’objet.
2. Empêcher tous objets étrangers tels que des attaches trombones ou...

E – v
Declaration of Conformity
Directives covered by this Declaration
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC.
73/23/EEC Low Voltage Equipment Directive, amended by 93/68/EEC.
Products covered by this Directive
Large Screen Projector type THUNDER 10000sx Chassis EURO
THUNDER 10000sx Chassis USA
Basis on which Conformity is being declared
The products identified above comply with the protection requirements of the above EU
directives, and the manufacturer has...

E – vi
TABLE OF CONTENTS
Video Adj........................................................................E-33
Noise Reduction......................................................E-33
Color Matrix .............................................................E-34
Y/C Delay.................................................................E-34
Telecine...................................................................E-34
Motion Select...........................................................E-34
Motion...

E – 1
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Taking a few minutes now to review the manual may
save you hours later on. At the beginning of each section of the manual
youll find an overview. If the section doesnt apply, you can skip it.
Whats In The Box?
Make sure your box contains everything listed. If any pieces are miss-
ing, contact your dealer. Please save the original box and packing ma-
terials if you ever need to ship the...

E – 2
1. Part Names and Functions
PC Card Slot
*To turn on the main power to the projector, press the switch to the ON
position (I) and the POWER indicator on the rear panel will turn or-
ange in color.
Press to the OFF position (0) to turn the main power off.
NOTE: When turning off the main power, first return the projector to the standby
condition by pressing the POWER OFF button on the remote control or the POWER
button on the rear panel and then turn off the main POWER switch. These pro-
cedures are...

E – 3
LENS SHIFT
ZOOM MENU SELECT
-+
ENTER
ONINDICATOR POWER
STATUS
ON/OFF
OFF
CANCEL FOCUS
11 10 9 8 7 5 4 2
1 3 6
1. Power Button
Press to turn the projector on when the projector is in the standby con-
dition (Main Power switch must be on and the POWER indicator lit or-
ange). Press and hold for 2 seconds to turn off the projector.
2. Power Indicator
When this indicator is green, the projector is on; when the indicator is
orange, it is in standby mode.
NOTE: After the projector is turned off, the...

E – 4
OUTPUT
INPUT3
OPTION
REMOTE1RGB
OUTIN
REMOTE2
REMOTE3INPUT7
INPUT8 INPUT5 INPUT6
OUT
LED
ON
OFF IN
INY
C S-VIDEO1
S-VIDEO2 VIDEO1 VIDEO2 R/Cr
B/CbCb
H/HV
V VH/HV B/CbG/Y G/YR/CrCr
SDI Y
INPUT2 INPUT1 INPUT4
OUTPUT
INPUT0
RGB DIGITALINPUT9
OUT
5
1
2
3
4
1312 11 10 9 8 7 6
Terminal Panel
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Space to install the optional SD-SDI or SX HD-SDI board.