Digital Projection Projector WQXGA User Manual

www.digitalprojection.com
english
11
1.4 WARNING
This product contains chemicals, including lead, known to the State of California to cause 
birth defects or other reproductive harm. Recycle properly, do not dispose of in ordinary 
waste!
1.5 REMOTE CONTROL WARNING
Laser radiation class II product; wavelength 670nm; maximum output 1mW.
Remote control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.
Remote control complies with applicable requirements of EN 60 825-1: 1994 + A11
1.6...

english
12
WQXGA User’s Guide –  This page intentionally left blank.
Safety   

www.digitalprojection.com
english
13
1 What’s in the box?
The WQXGA Projector comes with the following components:
Projector
Power Cable (Country Dependant)
Remote Control
HDMI-cable
DVI-cable
Ceiling mount Cable Cover
User Documentation
Please verify that you have all compoents upon unpacking the unit, and i\
ts contents.
Please save packaging materials for future use, should it be necessary to ship the unit.   

english
14
WQXGA User’s Guide –  This page intentionally left blank.
What’s in the Box?   

www.digitalprojection.com
english
15
1 Getting to know the projector
1.1  Overview
A Lens 
B   IR sensor 
C  Ventilation 
D   Lens release 
E   Power connector 
F  Keypad 
G   Connector panel 
H  LCD 
I   Lamp lids 
J   Adjustable feet 
K   Security lock 
L   Ceiling mount
Figure 1-1.  - Projector front view
Figure 1-2.  - Projector rear view
Figure 1-3. - Projector bottom view
ABCD
B
CCE
HBGCBI
F
JJK
B
L   

english
16
WQXGA User’s Guide – 
Getting to know the projector
1.2 Indicators
System status indicators are located right of the keypad on the back of the projector. Figure 
4-4 shows the three status indicators – one for each lamp and one for the system statu\
s.
Figure 1-4. The lamp indicators
For the lamp indicators the following apply:
-  PERMANENT GREEN LIGHT: The lamp is on and operating normally.
-  PERMANENT YELLOW LIGHT: The lamp is off. The lamp may be disabled in the menu or 
the system is in...

www.digitalprojection.com
english
17
1.2.2 Keypad
The projector has an illuminated keypad on the back of the unit. Figure 4-5 shows the 
keypad.
Figure 1-5.  Projector keypad
The keypad is used to:
- navigate the menu system
-  scroll the information in the LCD panel
-  directly select input sources
-  enter pin code (if enabled)
-  power on/off
-  adjust basic image functions
The keypad is illuminated for operation in dark environments. Available functions are 
illuminated in yellow while selected...

english
18
WQXGA User’s Guide – 
Getting to know the projector
1.2.4 Connectivity
The projector features a wide range of video inputs and command/control connectors.   
Figure 4-7 shows the connector panel.
Figure 1-7. Connector panel
A   LAN: 10/100 Mbit Ethernet connector for command, control and software upgrade.
B   RC INPUT: 3.5mm mini-jack connector. Allows connection of external IR receiver or 
wired remote control.
C   TRIGGERS: 3.5mm mini-jack connector triggers. Used for controlling peripheral...

www.digitalprojection.com
english
19
1.2.5 Graphical User Interface (GUI)
The projector has an easy-to-use on screen display (OSD) system for controlling the 
extensive number of features implemented. Figure 4-8. Top level OSD menu, shows the top 
level of the OSD menu.
Figure 1-8. Top level OSD menu
Activate the menu by pressing the “MENU” button on either the keypad or the remote   
control. Navigate the menu using the arrow keys.
The various functions in OSD menu is described in Chapter 5 Basic...

english
20
WQXGA User’s Guide – 
Getting to know the projector This page intentionally left blank.