Home
>
Digital Projection
>
Projector
>
Digital Projection Projector E-Vision 8000 Series User Manual
Digital Projection Projector E-Vision 8000 Series User Manual
Have a look at the manual Digital Projection Projector E-Vision 8000 Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 46
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide
40
ALIGNMENT menu
Projection Mode
• Front and Rear define whether the projector is in front of the screen or behind it.
Set to Ceiling + Front or Ceiling + Rear if the projector is ceiling mounted.
Fan Mode
• Adjusts the fan speeds to optimise cooling when the projector is in vert\
ical orientation.
Set to Up or Down as appropriate when projecting lens up or down.
Lens Control
• Press ENTER to display the Lens Control box.
•...](http://img.usermanuals.tech/thumb/5761/99239/w64_projector_manual_7320_d-45.png "Page 46
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide
40
ALIGNMENT menu
Projection Mode
• Front and Rear define whether the projector is in front of the screen or behind it.
Set to Ceiling + Front or Ceiling + Rear if the projector is ceiling mounted.
Fan Mode
• Adjusts the fan speeds to optimise cooling when the projector is in vert\
ical orientation.
Set to Up or Down as appropriate when projecting lens up or down.
Lens Control
• Press ENTER to display the Lens Control box.
•...")
![Page 47
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide
41
Lens Memor y submenu
The current lens position, focus and zoom settings can be saved in one o\
f ten memories, for
later recall.
• Press ENTER to open the Lens Memory submenu.
Save Memor y
• Press ENTER to open the Save Memory submenu.
• Use and to select from Lens Memor y 1 to Lens Memor y 10.
• Press ENTER to save the current settings.
Load Memor y
• Press ENTER to open the Load Memory submenu.
• Use and to select from...](http://img.usermanuals.tech/thumb/5761/99239/w64_projector_manual_7320_d-46.png "Page 47
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide
41
Lens Memor y submenu
The current lens position, focus and zoom settings can be saved in one o\
f ten memories, for
later recall.
• Press ENTER to open the Lens Memory submenu.
Save Memor y
• Press ENTER to open the Save Memory submenu.
• Use and to select from Lens Memor y 1 to Lens Memor y 10.
• Press ENTER to save the current settings.
Load Memor y
• Press ENTER to open the Load Memory submenu.
• Use and to select from...")
![Page 55
Digital Projection E-Vision 8000 Series MENU MAP Operating Guide
49
Menu Map
Menu Submenus and Controls
INPUT
Input Selection HDMI, DVI, VGA, Component/BNC, Composite, S-Video, 3G-SDI, Option Board
PIP
PIP Option Off, On
PIP Input Select from group B or group A
Position Top Left, Top Right, Bottom Left, Bottom Right, Split L-R
Test Pattern Off, Color Bars, Alignment Grid, Burst, Red, Green, Blue, White, Black, Cross Mark, Cross\
Hatch +
Mark, Corrected Red, Corrected Green, Corrected Blue,...](http://img.usermanuals.tech/thumb/5761/99239/w64_projector_manual_7320_d-54.png "Page 55
Digital Projection E-Vision 8000 Series MENU MAP Operating Guide
49
Menu Map
Menu Submenus and Controls
INPUT
Input Selection HDMI, DVI, VGA, Component/BNC, Composite, S-Video, 3G-SDI, Option Board
PIP
PIP Option Off, On
PIP Input Select from group B or group A
Position Top Left, Top Right, Bottom Left, Bottom Right, Split L-R
Test Pattern Off, Color Bars, Alignment Grid, Burst, Red, Green, Blue, White, Black, Cross Mark, Cross\
Hatch +
Mark, Corrected Red, Corrected Green, Corrected Blue,...")
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide 45 Notes See also Using the Menus, earlier in this guide and Menu Map, later in this guide. Eco Network Power must be set to Standard, if you wish to control the projector via the LAN connection. CONTROL menu Eco Network Power • Set this to Standard or Eco as required. In Eco mode, the LAN power supply is switched off. Auto Power Off • Set this to On, if you want the projector to go into Standby mode when no input source is detected for 20 minutes. Auto Power On • Set this to On, if you want the projector to start up immediately when the mains is connected. • Set this to Off, if you want the projector to go into Standby mode when the mains is connected. In this case, the projector will not start up until the POWER button is pressed on the control panel or the remote control. INPUT PICTURE LAMPS ALIGNMENTCONTROL SERVICEEcoNetwork Power Auto Power Off Auto Power On Projector Control Network Enter Startup Logo Trigger Auto Search Dynamic Black Language Enter Rev F July 2014
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide 46 Notes See also Using the Menus, earlier in this guide and Menu Map, later in this guide. Eco Network Power must be set to Standard, if you wish to control the projector via the LAN connection. To change any of the network settings, use the embedded LAN IP Configuration Utility (see the Remote Communications Guide). Projector Control • Set this to Network or RS232 as required. Network submenu • Press ENTER to open the Network submenu. The settings here are for information only. CONTROL menu continued INPUT PICTURE LAMPS ALIGNMENTCONTROL SERVICEEcoNetwork Power Auto Power Off Auto Power On Projector Control Network Enter Startup Logo Trigger Auto Search Dynamic Black Language Enter Network IP Address 192.168.00.100 Subnet Mask 255.255.155.00 Gateway 192.168.00.254 DHCP Off Rev F July 2014
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide 47 Startup Logo • Set this to On if you want the DP logo to show when the projector is first switched on. Trigger • Set this to Auto if you want the Trigger output to be activated when the projector is first switched on. • Set this to one of the Aspect Ratio settings, if you want the Trigger output to be activated when the projector is switched to that aspect ratio. Auto Search • When this is set to On, the projector will search for an alternative input source when the current input source is disconnected • When this is set to Off, the projector will show the DP logo when the current input source is disconnected. Dynamic Black • Set this to On or Off as required. Language • Press ENTER to open the Language Selection menu, then select an language from the list. Notes See also Using the Menus, earlier in this guide and Menu Map, later in this guide. Dynamic Black reduces the overall light output for images that contain a lot of black. This improves the perceived contrast ratio. CONTROL menu continued Rev F July 2014
Digital Projection E-Vision 8000 Series A TOUR OF THE MENUS Operating Guide 48 SERVICE menu Information • The first part of the menu is for information only. Blue Only • Set this to On or Off as required. Factor y Reset • Projector will ask for confirmation before restoring all settings to factory defaults. • When the confirmation box appears, use or to move the blue highlight to OK or Cancel, then press ENTER to confirm your selection. Notes See also Using the Menus, earlier in this guide and Menu Map, later in this guide. Do NOT do this unless you are sure that you want to restore ALL settings to their factory defaults. Rev F July 2014
Digital Projection E-Vision 8000 Series MENU MAP Operating Guide 49 Menu Map Menu Submenus and Controls INPUT Input Selection HDMI, DVI, VGA, Component/BNC, Composite, S-Video, 3G-SDI, Option Board PIP PIP Option Off, On PIP Input Select from group B or group A Position Top Left, Top Right, Bottom Left, Bottom Right, Split L-R Test Pattern Off, Color Bars, Alignment Grid, Burst, Red, Green, Blue, White, Black, Cross Mark, Cross\ Hatch + Mark, Corrected Red, Corrected Green, Corrected Blue, Horizontal Ramp Color Space Auto, YCbCr, YPbPr, RGB-PC, RGB-Video Input Lock Auto, 48Hz, 50Hz, 60Hz Background Logo, Blue, Black, White Video Standard Auto, PAL, SECAM, NTSC Auto Sync Adjust Always, Off, Auto PICTURE Display Mode Video, High Bright, Presentation Contrast Adaptive Contrast Off, On Brightness Saturation Hue Gamma Video, Linear, Film, Graphics Color Color Temperature Native, 5000K, 6500K, 7800K, 9300K Trim RGB Lift and Gain Sharpness Noise Reduction Aspect Ratio 5:4, 4:3, 16:10, 16:9, 1.88, 2.35, Letterbox, Native, Unscaled Overscan Off, Crop, Zoom VGA Setup H Total, H Start, H Phase, V Start Auto Sync Press ENTER to execute Notes Some of the information in this menu map is summarised. See the actual menu on the projector for full detail. Some menu options and controls may not be available due to settings in other menus. These will be shaded grey on the actual menu. Where it would be helpful, some menu options are described in more detail earlier in this operating guide. Color Temperature values depend on other settings. Rev F July 2014
Digital Projection E-Vision 8000 Series MENU MAP Operating Guide 50 LAMPS Mode Dual, Single Power Normal, Custom Power, Eco High Altitude Off, On Custom Power Level 80-100% Lamp Status Information Only: Lamp 1 On, Off Lamp 2 On, Off ALIGNMENT Projection Mode Front, Rear, Ceiling + Front, Ceiling + Rear Fan Mode Normal, Up, Down Lens Control Shift, Zoom/Focus Lens Memory Load Memory Memory 1-10 Save Memory Memory 1-10 Center Lens Press ENTER to execute Warp Keystone Horizontal, Vertical Rotation Pincushion/Barrel Top Left Corner, Top Right, Bottom Left, Bottom Right Custom Warp Reset (all warp settings) Press ENTER to execute Blanking Top, Bottom, Left, Right, Reset (all blanking settings) Edge Blend Edge Blend Off, On Blend Width Top, Bottom, Left, Right Black Level Uplift Select Area Top, Bottom, Left, Right Adjust Width All, Red, Green, Blue Reset (all edge blend settings) Press ENTER to execute Align Pattern Off, On Menu Submenus and ControlsNotes Some of the information in this menu map is summarised. See the actual menu on the projector for full detail. Some menu options and controls may not be available due to settings in other menus. These will be shaded grey on the actual menu. Where it would be helpful, some menu options are described in more detail earlier in this operating guide. Rev F July 2014
Digital Projection E-Vision 8000 Series MENU MAP Operating Guide 51 CONTROL Eco Network Power Standard, Eco Auto Power Off On, Off Auto Power On On, Off Projector Control RS232, Network Network Information only: IP Address, Subnet Mask, Gateway, DHCP Startup Logo On, Off Trigger Auto, 5:4, 4:3, 16:10, 16:9, 1.88, 2.35, Letterbox, Native, Unscaled Auto Search On, Off Dynamic Black On, Off Language Select from list SERVICE Information only: Model, Serial Number, Software Version, Active/PIP Source, Pixel Clock, Signal Format, H/V Refresh Rate, Lamp Time, Power On Time, Blue Only Off, On Factory Reset Press ENTER to execute. Menu Submenus and ControlsNotes Some of the information in this menu map is summarised. See the actual menu on the projector for full detail. Some menu options and controls may not be available due to settings in other menus. These will be shaded grey on the actual menu. Where it would be helpful, some menu options are described in more detail earlier in this operating guide. Rev F July 2014
52 Rev F July 2014 Digital Projection E-Vision 8000 Series Operating Guide This page is intentionally left blank.
E-Vision 8000 Series High Brightness Digital Video Projector REMOTE COMMUNICATIONS GUIDE Rev F July 2014
Digital Projection E-Vision 8000 Series IN THIS GUIDE Remote Communications Guide IN THIS GUIDE Introduction ........................................................................\ ................................55 Operation commands ...............................................................................................55 Key commands ..........................................................................................................55 The Operation Commands ........................................................................\ .....56 INPUT menu ...............................................................................................................56 PICTURE menu ..........................................................................................................58 LAMPS menu .............................................................................................................60 ALIGNMENT menu ....................................................................................................60 CONTROL menu ........................................................................................................62 SERVICE menu ..........................................................................................................63 Miscellaneous commands ........................................................................................64 The Key Commands ........................................................................\ .................65 Web Configuration Utility ........................................................................\ .......66 Examples ...................................................................................................................66 Rev F July 2014