Digital Projection Mercury Hd Users Manual

8-15 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Setup
Setup Page 1
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection. The
options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
Selecting a Color or Logo for Background [Background]
Use this feature to display a blue/ black screen or logo
when no signal is available. The default background is
Blue. You can change the logo...

8-16 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Selecting Operation Mode
Set the operation mode of the USB mouse connected to the
USB port (MOUSE/HUB) on the projector
Auto............ Depending on connection of the USB port
(PC) on the projector and a USB port (type A)
on your PC, the USB mouse is operated in the
following way:
* When connecting the projector to your PC
The USB mouse connected to the projector
can be used as a PC mouse.
* When not connecting the projector to your
PC...

8-17 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Enabling Last Memory [Last Memory]
The projector stores the last signal data in memory for each
input (RGB1, RGB2, DVI DIGITAL, Video, S-Video and Slot
1/2).
This feature will reduce switching time between sources. If
a commercially available switcher is connected, turning on
this feature may cause the image to appear incorrectly.
Should this happen, turn this feature off to mute the screen
during switching.
Enabling Idle Mode [Idle Mode]...

8-18 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Disabling the Cabinet Buttons [Control Panel Key Lock]
This option turns on or off the Control Panel Key Lock
function.
NOTE:
* This Control Panel Key Lock does not affect the remote control
functions.
* When the cabinet buttons are disabled, pressing and holding the
CANCEL button for about 10 seconds will change the setting to
enable.
Lamp Settings
Lamp Mode
This feature enables you to select two modes of the lamp:
Normal and Eco. The...

8-19 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Link Mode Status Page
Displaying Current Status of Link Mode
When selecting the tab Status, you will get the following
dialog box.
Master I D .................Indicates the Master projector
Status....................... Indicates the status of the master
projector
Connected PJ ........... Indicates number of connected slave
projectors
Slave No...................Indicates serial number of the slave
projector
I D...

8-20 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Advanced
IP Address
An IP address can be automatically assigned to this
projector by your DHCP server. If your network does not
automatically assign IP address, ask your network
administrator for an address, and then register it manually.
Automatic.... Automatically assigns an IP address to the
projector from a DHCP server.
Manual......... Provides a space for you to register the IP
address or subnet mask number obtained
from your network...

8-21 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
WEP (for Wireless only)
Select this option whether using the WEP (Wired Equivalent
Privacy) key for encryption or not. To use encryption, specify
WEP key.
Disable........ Will not turn on the encryption feature. Your
communications may be monitored by
someone.
64bit ............ Uses 64-bit datalength for secure
transmission.
128bit .......... Uses 128-bit datalength for secure
transmission. This option will increase privacy
and security...

8-22 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
LAN Mode Mail Page
NOTE: To the Mail Alert feature on wireless LAN connection, selectInfrastructure for Mode in Network Type. .
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via
e-mail when using wireless or wired LAN. The error
message will be notified when the projector lamp has
reached the end of its usable life or an error occurs in the
projector.
Sample of a message...

8-23 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Password
A password can be set for your projector to avoid operation by
an unauthorized person.
There are two password options: one for menu and the other for
logo.
When a password is set, doing any one of the following four op-
erations will display the Password input screen.
For Menu:
* Changing the menu to Advanced
* Editing the custom menu
For Logo:* Changing the background
* Changing the logo data in PC Card Files
Procedures for...

8-24 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Enable/Disable.........This turns the Security function on or
off.
Keyword..................Enter an appropriate keyword when
you use the Security function.
(Up to 10 characters can be used.)
The Security function is available only
when your keyword is entered.
Use Protect key ....... Check this box to lock your projector
when using a PC card. To use a
keyword without a PC card, do not
check this box.
Drive...