Digital Projection Mercury Hd Users Manual

8-5 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
NOTE: The shaded item indicates the default setting. 

8-6 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
* When selecting “PC
Card”, the “Network
Type” and the “WEP”
setting screens
appear. 

8-7 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Entering Alphanumeric Characters by Using the
Menu
Alphabet or numeric characters are used for your IP address
or projector name. To enter IP Address or projector name, use
the software keyboard.
For using the software keyboard, see page 10-10.
Entering Alphanumeric Characters by Using the
Remote Control Numeric Buttons
Input alphanumeric characters by selecting one character at
a time with the numeric (Source/Input) buttons 1through 10(0)...

8-8 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Edit.............. Enables you to change source names or
assign the direct key.
Source Name
Enter a signal name. Up to 18 alphanumeric
characters can be used.
Input Terminal
Change the input terminal. RGB1 and RGB2
are available for RGB signal; Video and S-
Video are available for composite signal.
Direct key
You can assign specific remote keys for
direct signal input selection.
Lock
Set so that the selected signal cannot be
deleted when...

8-9 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
DigiView - SweetVision
The SweetVision feature provides improvement of contrast
using a proprietary detail enhancement technology.
NOTE: This feature is not available for 480p, 576p and HDTV signals.
O f f ...............Turns off the SweetVision feature
L o w .............Selects low level
Medium........ Selects medium level
High.............Selects high level
Split Mode
This feature turns on or off to show the effect of the Sweet
Vision....

8-10 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Selecting Gamma Correction Mode
Use the  or  buttons to choose one mode from the seven
listed:
Video-Lo..... Video originated material in a Theatrical
environment with low ambient light
Film-Lo......... Film originated material in a Theatrical
environment with low ambient light
Graphics..... Emphasising detail - spreadsheets,
Powerpoint slides etc in high ambient light
Media........... High saturation bright colours in high ambient
light...

8-11 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Option Adjust
Clamp Timing
According to the signal, this function sets the detection
position (i.e., clamp position) of the black level reproduction of
the analog input signal. Normally this is not used.
Mode 0-4 ..... Select the appropriate one.
Adjust.......... This permits the video clamp position for each
signal to be set. Use Adjust when a clamp
timing error occurs at the time of special
analog signal reception such as 1080P. Note...

8-12 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Ref. Adjust
Using DigiScale - 3D Reform
This feature corrects trapezoidal distortion so that the
projected image is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform
Save option on Setup (See page 8-16).
Cornerstone
See page 3-4.
* When Resolution is set to Native, Cornerstone and
Keystone are not available.
Keystone
1. Press the SELECT  or  button to adjust the...

8-13 Digital Projection   
MERCURY HD8. Using the On-Screen Menus
Factory Default
All Data /Current Signal
The Factory Default feature allows you to change
adjustments and setting to the factory preset for source.
All Data ........ Reset all the adjustments and settings for all
the signals to the factory preset except
Language, Background Logo, Communication
Speed, Projector ID, Lamp Settings, LAN
Mode, Password, Security, Remaining Lamp1/
2 Time, Lamp 1/2 Hour Meter, Filter Usage and
Projector Usage....

8-14 8. Using the On-Screen Menus Digital Projection   
MERCURY HD
Selecting Menu Display Time
This option allows you to select how long the projector
waits after the last touch of a button to turn off the menu.
The preset choices are Manual, Auto 5 sec, Auto 15
sec, and Auto 45 sec. The Auto 45 sec is the factory
preset.
Manual......... The menu can be turned off manually.
Auto  5  sec .. The menu will automatically be turned off in 5
seconds if no buttons are pressed within 5
seconds.
Auto  15  sec The...