Digital Projection Lightning 38 Wuxga 3d User Manual

an introduction to the processors,  
use and set up
user’s guide
FUSION     

english
2FUSION User’s Guide – Introduction
This page intentionally left blank.   

english
3
1 Introduction
1.1 Thank you
Thank you for purchasing a Multi image processing system processor.
The Multi image processing systems FUSION are state-of-the-art image processing engines 
for the combination and setup of multiple projectors in order to create one, large, seamless 
image. By combining multiple projectors, images with unprecedented resolution and fidelity 
can be created.
The multi image processing system processors feature unique functionality and unmatched 
compatibility, and are...

english
4FUSION User’s Guide – Introduction
Contents of this User’s Guide
1 Introduction 3
1.1 Thank you
1.1 Features
2 SAFETY  7
2.1 GENERAL WARNINGS
2.1 WEEE INFORMATION
2.1 WARNING ABOUT SUBSTANCES
2.1.1  WARNING SYMBOLS
3 What’s in the box?  9
4 Installation and setup  11
4.1 System requirements
4.2 System overview
4.3 Connectors
4.4 LED indicators / Front button
4.5 Network settings
4.6 Firewall settings
4.7 Software
4.8 Mounting the FUSION processor in rack
5  Getting to know the GUI  15
5.1...

english
5
5.4.2 Calibration state
5.4.3 Online state
5.4.4 Auto state
6 Geometry correction  27
6.1 Warping algorithms
6.1.1 Perspective
6.1.2  Mesh Warp Transform
6.1.3 Mesh Warp Bezier
6.2 Warping user interface
6.3 Scaling filters
6.3.1  Lanczos filter
6.3.2 B-spline filter
6.3.3 C-spline filter
6.3.4 Linear interpolation filter
6.4 Working with the perspective algorithm
6.5 Working with the Mesh Transform algorithm
6.6 Working with Mesh Bezier algorithm
6.7 Fine tuning control points 
6.8 Real Time...

english
6FUSION User’s Guide – Introduction
10 Storing and recalling data  49
10.1 Storing/recalling calibration to/from the FUSION unit
10.2 Storing/recalling data to/from the control PC
10.3 Accept  calibration
11  Technical specifications  53
11.1 Electrical
11.2 Mechanical   

english
7
2 SAFETY
This device complies with safety regulations for Information Technology Equipment intended 
to operate in “normal” environments (offices and homes). Before using the device for the first 
time, please read the safety instructions thoroughly.
2.1 GENERAL WARNINGS
Use only the cables and cords supplied with the device or original replacement cables. Using 
other cables or cords may lead to malfunction and permanent damage of the device.
Always use 3-prong / grounded power cord to ensure...

english
8FUSION - Safety instructions
2.1 WARNING ABOUT SUBSTANCES
This product contains chemicals, including lead, known to the State of California to cause 
birth defects or other reproductive harm. Recycle properly, do not dispose of in ordinary 
waste!. 
 
2.1.1 WARNING SYMBOLS
 READ USER GUIDE Attention! Read the user guide for further information!
 RECYCLE Warning! Recycle properly, do not dispose of in ordinary waste! 
 NO TELEPHONE Warning! Do not connect to telephone lines!   

english
9
3 What’s in the box?
The FUSION MDP (1920 x 1200) and MDP 3D (2560 x 1600) comes with the\
 following: 
Multi image processing system unit
Power Cable (Country Dependant)
2x Dual Link DVI cables
CD with software
Network cable
User Documentation
Please verify that you have all compoents upon unpacking the unit, and i\
ts contents.
Please save packaging materials for future use, should it be necessary to ship the unit.    

english
10FUSION – What’s in the box?