Digital Projection Hl12000hd, Hl10000hd Users Manual

E-71
4. Set the Day, Time (24 hours format), On-Time and Off-Time using the
SELECT buttons and the Software keyboard (1 thru 10).
5. Select On Timer or Off Timer
6. Repeat the Timer
To repeat the On Timer or Off Timer program every week, place a check
mark in “Repeat”.
7. Select “OK” and press the ENTER button on the remote control to com-
plete the setting. To cancel this and return to its previous screen, select
“Cancel”.
NOTE: If there is no operation for 4 hours or more after the projector is turned...

E-72
4. The projector will turn off after the countdown is complete.
NOTE:
•To cancel the preset time, set Off for the preset time or turn off the power.
•When the remaining time reaches 3 minutes before the projector is turned off,
the Projector will turn off in 3 minutes message will be displayed on the bottom
of the screen.
PC Card Files
The PC Card Files feature allows you to display a list of all the
files stored in the PC card so that you can select a file you want
to display. You can also sort...

E-73
Page 2
Signal Type, Video Type, Sync Type, Interlace, Direct Key
Projector Information
Displays the information for your Projector such as Remaining
Lamp Time, Lamp Hour Meter, Projector Usage, Projector ID,
version number and others. This dialog box has five pages.
Page 1
Remaining Lamp Time, Lamp Hour Meter, Projector Usage, Pro-
jector ID
NOTE: Nothing is displayed on the item, “Serial Number”. Please confirm the serialnumber on label attached on the projector itself.
Page 2
Version...

E-74 

E-75
7
Maintenance
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1 Cleaning the Cabinet and the Lens ....................... E-76 

E-76
1. Turn off the Projector before cleaning.
2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol
or thinner.
3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mark the lens.
1 Cleaning the Cabinet and the Lens
7. Maintenance 

E-77
8
Appendix
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1 Troubleshooting ..................................................... E-78
2 Specifications ........................................................ E-80
3 Cabinet Dimensions .............................................. E-85
4 Compatible Input Signal List .................................. E-87
5 
Pin Assignment of PC CONTROL IN Connector (D-Sub 9 Pin)..... E-89
6 
Pin Assignment of REMOTE IN 3 Connector (XLR connector)..... E-89
7 
Pin...

E-78
8. Appendix
1 Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Power Indicator
Indicator Condition
Projector Condition Note
Off
Blinking light
Steady lightGreen blinking
Orange blinking0.5 sec ON,
0.5 sec OFF
2.5 sec ON,
0.5 sec OFF
0.5 sec ON,
0.5 sec OFF
2.5 sec ON,
0.5 sec OFFThe main power is off
The projector is getting ready to turn on.
The lens shutter is closed.
Off Timer or Sleep Timer is active.
The projector is cooling...

E-79
8. Appendix
Does not turn on
Will turn off
No picture
Image isn’t square to the
screen
Picture is blurred
Image is scrolling verti-
cally, horizontally or
both
Remote control does
not work
Indicator is lit or blink-
ing
Cross color in RGB
mode
USB mouse does not
work
No on-screen menu•Check that the power cable is plugged in and that the main power switch on the projector is on. See pages E-
27 and E-30.
•Ensure that the lamp cover is installed correctly.
•Check to see if the projector has...

E-80
8. Appendix
2 Specifications
Model Number HL 12000HD / HL 10000HD
Panel
*1DMDTM 1.25”
3
Output Resolution 2048
1080 native resolution
Lamp 2.0kW Bulb Type Short Arc Xenon
Built in: Overheat Protection
Lamp Over-Usage Protection
Light Output 12,000 Lumens (HL 12000HD)
9000 Lumens (HL 10000HD)
Full Light Output at 200 - 240V
Brightness Uniformity >80% corner to center
Contrast Ratio 1600 : 1 Full On / Off (HL 12000HD)
1800 : 1 Full On / Off (HL 10000HD)
Lens Movement Motorized Horizontal and Vertical...