Digital Projection Highlite Cine 260 Hb, Hc, Highlite 1080p 330 User Manual

Rev B   July 2011 Page 6.15
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual 6. Appendix
Notes
 All of the projector’s features 
can be controlled using an 
external control system, 
or a PC using a terminal-
emulation program such as 
HyperTerminal, via a serial 
or LAN connection. This 
is done by using the text 
strings described in  Remote 
communications protocol , 
later in this section.
  More detailed LAN IP 
configuration can be carried 
out using a web browser. 
For more information...

Page 6.16 Rev B   July 2011
6. Appendix Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
Remote communications protocol
Introduction
All of the projector’s features can be controlled using an external control system, 
or a PC using a terminal-emulation program such as HyperTerminal, via a serial 
or LAN connection. This is done by using the text strings described in  Remote 
communications protocol , in section 6. Appendix.
There are 2 types of commands: Key commands
Operation commands
All...

Rev B   July 2011 Page 6.17
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual 6. Appendix
Code transmitted Description
0x81 contrast
Bring up or cancel contrast slide bar.
0x82sharpBring up or cancel sharpness slide bar.
0x83nrBring up or cancel noise reduction slide bar.
0x85gam.swSwitch to the next gamma value.
0x8Bsrc.1Switch the active source to source 1.
0x8Csrc.2Switch the active source to source 2.
0x8Dsrc.3Switch the active source to source 3.
0x8Esrc.4Switch the active source to source...

Page 6.18 Rev B   July 2011
6. Appendix Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
Operation Commands
Operation commands are used to simulate menu operations and determine th\
e 
settings of the projector, and use the following format:
op   [CR]
The  string can take one of the following formats:
Description
Set = Makes the setting take that value.
Get ?Asks what the current value is.
The value is returned as an ascii text string.
Increment +Adds 1 to the current value.
Decrement...

Rev B   July 2011 Page 6.19
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual 6. Appendix
OperationValues Notes
source.sel = ?0 = HDMI 1 
1 = HDMI 2 
2 = RGB 
3 = YPrPb 1 
4 = YPrPb 2 
5 = S-Video 
6 = Video
resync (execute)
color.space = ?0 = Auto 
1 = YPbPr ( = REC709) 
2 = YCbCr ( = REC601) 
3 = RGB-PC 
4 = RGB-Video
video.stand = ?0 = Auto 
1 = NTSC 
2 = PAL 
3 = SECAM
gamma = ?0 = CRT 
1 = Film 
2 = Video 
3 = Punch 
4 = Graphics
color.temp = ?0 = 5500K 
1 = 6500K 
2 = 7500K 
3 = 9300K...

Page 6.20 Rev B   July 2011
6. Appendix Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
OperationValues Notes
blank.screen = ?0 = Logo 
1 = Black 
2 = Blue 
3 = White
auto.pow.off = ?0 = Off 
1 = On
auto.pow.on = ?0 = Off 
1 = On
rear.proj = ?0 = Off 
1 = On
ceil.mode = ?0 = Off 
1 = On
logo.disp = ?0 = Off 
1 = On
1.key = ?0 = HDMI 1 
1 = HDMI 2 
2 = RGB 
3 = YPrPb 1 
4 = YPrPb 2 
5 = S-video 
6 = Video
2.key = ?0 = HDMI 1 
1 = HDMI 2 
2 = RGB 
3 = YPrPb 1 
4 = YPrPb 2 
5 = S-video 
6 =...

Rev B   July 2011 Page 6.21
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual 6. Appendix
OperationValues Notes
trig.2 = ?0 = Screen 
1 = 16:9 
2 = Theaterscope 
3 = 4:3 
4 = 4:3 Narrow 
5 = RS232 
6 = On 
7 = Off
0: Trigger occurs when the projector is in 
RUNNING mode
auto.source = ?0 = Off 
1 = On
model.name ?
ser.number ?
soft.version ?
act.source ?0 = HDMI 1 
1 = HDMI 2 
2 = RGB 
3 = YPrPb 1 
4 = YPrPb 2 
5 = S-video 
6 = Video Source Enable
h.refresh ? KHz
v.refresh ? Hz
pixel.clock ?...

Page 6.22 Rev B   July 2011
6. Appendix Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
OperationValues Notes
zoom + -+ Zoom Out
-  Zoom In
vert.offset  + -+ Shift Up
-  Shift Down
horiz.offset + -+ Shift Right
-  Shift Left
ir.sw = ?0 = Off 
1 = On IR Remote Control enable
eco.net.pow = ?0 = RS232
1 = LAN Serial/LAN switch
op net.ipaddr ?LAN IP address Default address is 192.168.0.100
To find out how to change this, see  Setting the 
LAN IP configuration , later in this section.
lamp.mode =...

Rev B   July 2011 Page 6.23
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual 6. Appendix
Setting the LAN IP configuration
More detailed LAN IP configuration can be carried out using a web browser.
Point your browser at the projector by typing the LAN IP Address into the 
address bar, then press the Enter key.
The embedded IP Configuration webpage should appear.
Set the addresses as required, then click on Save.
•
•
•
Notes
 
The default LAN IP address is 
192.168.0.100
  If you suspect this...

Digital Projection HIGHlite Cine 260, 1080p 330 User Manual